User's Manual
Table Of Contents
- Personal ComputerModel No. FZ-55 SeriesOperating Instructions - Reference Manual
- Introduction
- Attaching/Detaching the keyboard
- Rear Expansion Area
- Front Expansion Area
- TOUGHBOOK Universal Bay
- Create a Recovery Disc
- About the Partition Structure
- Flash Memory Backup/Restore Function
- Description of Parts
- Turning On / Turning Off
- Touchpad
- Keyboard
- Screen Input Operation
- Important Tips
- Battery Power
- Sleep/Hibernation Functions
- Panasonic PC Settings Utility
- LAN
- Disabling/Enabling Wireless Communication
- Wireless LAN
- Bluetooth
- Wireless WAN
- GPS
- Saving Power
- Security Measures
- Concealed Mode
- Panasonic PC Day Night Mode Utility
- Setup Utility
- Handling and Maintenance
- Optical Disc Drive
- microSD Memory Card
- Smart Card
- RAM Module
- External Display
- USB Devices
- Serial Port
- Camera
- Contactless Smart Card Reader/RFID Reader
- Fingerprint Reader
- Discreted GPU
- SSD Pack
- Flash Memory Drive
- Port Replicator (CF-VEB541 series)
- Battery Charger
- Troubleshooting
- Hardware Diagnostics
- Reset your computer
- Installing Software
- Error Message
- Technical Information
- Erasing Flash Memory Data
- Specifications
- WARRANTY
6. Connect the stack type connector of other language specific keyboard.
IMPORTANT
n Do not pull the flat cable (G) connecting the keyboard and stack type connector (F) forcibly.
7. Tighten the screws (H) firmly.
Use the PH 1 (PH #1) screwdriver.
The screws used are 3.
Recommended tightening torque
0.45 N•m ± 0.05 N•m (4.5 kgf•cm ± 0.5 kgf•cm)
8. Remove the release paper (I).
9. Insert the projection parts (J) of the keyboard into the (K) parts, and attach it while lowering.
10. Attach the keyboard plate (B) and tighten the screws (L) firmly.
Use the PH 1 (PH #1) screwdriver.
The screws used are 3.