OPERATING INSTRUCTIONS Tablet Computer Model No. FZ-A1 series Contents Safety Precautions .......................................................... 2 Regulatory Information .................................................... 6 Read Me First Read Me First Handling and Maintenance ........................................... 20 Troubleshooting Troubleshooting (Basic)................................................ 23 Appendix Specifications ...........................................................
Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. Read Me First DANGER Denotes a potential hazard that will result in serious injury or death.
ed r e or of n t, e t, t by ure t, g e to or If a Malfunction or Trouble Occurs, Immediately Stop Use If a Malfunction Occurs, Immediately Unplug the AC Plug • This product is damaged • Foreign object is inside this product • Smoke emitted • Unusual smell emitted • Unusually hot Continuing to use this product while any of the above conditions are present may result in fire or electric shock. • If a malfunction or trouble occurs, immediately turn the power off and unplug the AC plug.
Safety Precautions CAUTION Read Me First Do Not Leave This Product in High Temperature Environment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks.
or Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. ta pose s eriod rge evel ct in ng ter e tor ns your h for y . e than w.) is ount rter s d with ffice.
Regulatory Information Information to the User Read Me First This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers.
cette Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. 53-E-1 5-F-1 n l al es of hem s ces d ling. ycling our or ms.
Regulatory Information Read Me First emergency calls. Remember, in order to make or receive calls, Computer incorporating wireless WAN modem must be switched on and in a coverage area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call.
tions: This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this product.
Regulatory Information Cet équipement est conforme aux limites d’exposition aux rayonnements d’Industrie Canada établies pour un environnement non contrôlé. Ce PC avec émetteurs WLAN et/ou Bluetooth a été approuvé à des fins d’opération mobile; aucun espace minimum entre les antennes et le corps de l’utilisateur n’est requis. 25-Ca-1 FOR USE WITH MODEL NO. : Read Me First FZ-AA2202B POUR UTILISER AVEC MODÈLE : For your safety, please read the following text carefully.
Introduction Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully. Terms and Illustrations in These Instructions Page in these Operating Instructions or in the Reference Manual. Reference to the on-screen manuals. Some illustrations are simplified to help your understanding and may look different from the actual unit. Refer for the latest information about optional products to the catalogs, etc.
Description of Parts Front Side R BC A D E A Getting Started F G H I J KL M A Wireless WAN Antenna Reference Manual “Wireless Communication - Wireless WAN” B Ambient light sensor Reference Manual “Settings - Using Dashboard” C Front camera Reference Manual “Photos and Videos” D LCD “Input Operation” (page 18), “Home Screen” (page 19) E F Wi-Fi antenna / Bluetooth antenna Reference Manual “Wireless Communication - Wi-Fi”, “Wireless Communication
Rear Side AB F G J K H L on - r- I M J DC-IN jack K Expansion Bus Connector (Use as an extension in the future) L Pen holder ( page 14) M Security lock A Kensington cable can be connected. For further information, read the manual that comes with the cable.
First-time Operation 2. Pass one of the loops through the second Preparation loop on the tether. 1 Check and identify the supplied St 1 accessories. If you do not find the described accessories, contact your technical support office. 3. Thread the second loop on the tether to the hole as illustrated. AC Adaptor…1 Model No. FZ-AA2202B AC Cord…1 (Shape depends on the country) Getting Started 4.
d Starting Up 1 Connect this computer to a power outlet. The battery charging starts automatically. 3 If necessary, touch the language name and scroll the language list, then touch the language you use. 㪜㫅㪾㫃㫀㫊㪿㩿㪬㫅㫀㫋㪼㪻㩷㪪㫋㪸㫋㪼㫊㪀 㪜㫊㫇㪸㬧㫆㫃 㪝㫉㪸㫅ç㪸㫀㫊㩿㪙㪼㫃㪾㫀㫈㫌㪼㪀 㪝㫉㪸㫅ç㪸㫀㫊㩿㪚㪸㫅㪸㪻㪸㪀 㪝㫉㪸㫅ç㪸㫀㫊㩿㪝㫉㪸㫅㪺㪼㪀 㪝㫉㪸㫅ç㪸㫀㫊㩿㪪㫌㫀㫊㫊㪼㪀 㪠㫋㪸㫃㫀㪸㫅㫆㩿㪠㫋㪸㫃㫀㪸㪀 he 㪠㫋㪸㫃㫀㪸㫅㫆㩿㪪㫍㫀㫑㫑㪼㫉㪸㪀 㪥㪼㪻㪼㫉㫃㪸䌮㪻㫊㩿㪙㪼㫃㪾㫀㬡㪀 㪥㪼㪻㪼㫉㫃㪸䌮㪻㫊㩿㪥㪼㪻㪼㫉㫃㪸㫄㪻㪀 㪥㫆㫉㫊㫂㩷㪹㫆㫂㫄㬛㫃 d k the Do not disconnect the AC adaptor until the first-time operation procedure is completed.
First-time Operation 12 When “Make yourself at home” is displayed, touch [OK].
Turning On/Off and Sleeping/Waking Up Turning On Waking Up 1 Press (Power switch). 1 Press 2 Drag to to . , Camera application CAUTION Do not press the power switch repeatedly. Once you turn off this computer, wait for 10 seconds or more before you turn it on again. Do not perform the following operation until the home screen is displayed.
Input Operation Screen Input Operation Touch Select items or options. Digitizer Calibration H If necessary, perform the digitizer calibration by following steps below. Perform the calibration for the orientation to be used. 1 Touch -[ Pen Calibration]. 2 Using the digitizer pen, touch Touch and hold Open special options. Drag Scroll the screen. Flick Scroll the screen quickly. each target one by one. 3 Touch [Finished]. Buttons Getting Started Select additional functions.
y A B C D E F e n]. h G H I F Menu Depending on the applications, is displayed at the top-right of the screen. You can select additional functions from the menu. G Recent apps Display the recent applications. Touch an application to open from the application list. To stop the application, drag it to the right. H Home Return to the home screen. I Back Return to the previous screen.
Handling and Maintenance Operation Environment Useful Information Place this computer on a flat stable surface. If this computer is exposed to an extremely strong impact, it may become damaged.
ches to avoid scratches and peeling of this coating, an approved soft cloth has been included to wipe the LCD surface of this computer. Before using this computer, be sure to read the instructions provided below. • Be sure to wipe the LCD display to remove fingerprints, etc., with the soft cloth. • Do not wipe areas other than the LCD display with the soft cloth. How to use the soft cloth s s heck of * 2, as an rt he sible. ges on ce ay, a der • Use the soft cloth when it is dry.
Handling and Maintenance 1 Remove 12 screws of the battery cover and remove the cover. 4 Pull the cable to disconnect the connector. 5 Insulate the terminals of the 2 Peel off the clear sheet as Useful Information illustrated below. 22 3 Lift up and slightly pull the battery. connector with plastic tape, etc.
Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact Panasonic Technical Support. Cannot start up. The battery indicator is not lit. Connect the AC adaptor.
Troubleshooting (Basic) Display O No display The computer entered sleep by the power-saving function. To resume, To wake it up, press (Power switch). The screen is dark. If the brightness setting of this computer is set to “Automatic brightness”, the screen brightness automatically changes depending on the ambient brightness. Disable “Automatic brightness” and change the brightness of the screen. The screen is disordered. Connecting/disconnecting an external display may affect the screen.
Others n. No response atic s of the (Power switch) until “Power off” screen is Press and hold displayed and touch [OK], then press (Power switch) to turn it on. If the application does not work normally, uninstall and reinstall the application. To uninstall : 1. Touch - [ Settings] - [ Applications]. 2. Touch [DOWNLOAD] or [ALL], and touch the application to uninstall, then touch [Uninstall]. 3. Uninstall the application by following the on-screen instructions.
Specifications Main Specifications Model No. FZ-A1BDAAZAM / FZ-A1BDAAZCE CPU/Secondary cache memory Marvell PXA2128, Dual Core CPU, 1.20 GHz Main Memory 1 GB*1 Storage 16 GB*2 (Flash memory) Display Method 10.1 type (TFT) (1024 × 768 dots) Touchscreen Multi-touch screen and digitizer Wi-Fi IEEE 802.11 a/b/g/n v 2.1 +EDR Bluetooth*3 Wireless WAN* 3G/LTE module 4 GPS Card Slots built-in microSD Memory Card Slot* SIM Card Slot Interface USB 2.
*4 Only for model with wireless WAN. *5 This slot is compatible with High-Speed Mode. Operation has been tested and confirmed using Panasonic microSD/microSDHC Memory Cards with a capacity of up to 32 GB. Operation on other SD equipment is not guaranteed. *6 Does not guarantee operation of all USB-compatible peripherals. *7 Does not guarantee operation of all HDMI-compatible peripherals. *8 The AC adaptor is compatible with power sources up to 240 V AC adaptor.
LIMITED WARRANTY Integ For U.S.A. Panasonic System Communications Company of North America (PSCNA) Computer Products - Worldwide Warranties Section 1: Limited Warranty - Hardware PSCNA, referred hereafter as “Panasonic” will repair the products listed below with new or rebuilt parts, free of charge in the Global Panasonic approved location for the period specified below from the date of original purchase in the event of a defect in materials or workmanship.
Integrator is strictly not covered under the warranty and may void the computer warranty if damage results.
LIMITED WARRANTY modification, use not in accordance with product use instructions • Failures due to service by anyone other than a Panasonic Authorized Service Provider • Failures caused by improper installation of options or accessories or due to integration by any company other than Panasonic or a Panasonic Authorized Integrator • Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser • Damage that is attributable to acts of God This li
For Canada any g PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified.
LIMITED WARRANTY IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier.
al t for Pour le Canada GARANTIE LIMITÉE – ORDINATEURS ET PÉRIPHÉRIQUES PANASONIC Couverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que ce produit informatique (à l’exclusion des supports des logiciels) est, au moment de sa vente par PCI ou d’un revendeur agréé par PCI, exempt de défauts de pièces et de fabrication dans les conditions normales d’utilisation, et ce, pendant la période de couverture de la garantie, sous réserve des modalités décrites ci-dessous.
LIMITED WARRANTY Circular) 120-76A ou le feuilet n° 36 JAA: JAA TGL (Temporary Guidance Leaflets) No 36. EXPÉDITION DU PRODUIT POUR SERVICE SOUS GARANTIE Emballez soigneusement le produit, de préférence dans son emballage d’origine. Joignez une description de la défaillance de même qu’une pièce justificative de la date d’achat. Panasonic Canada Inc. ne peut être tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur.
For Europe tion t u e 60) ce ntie. tueux 0 nal. par la utre al, e subi PCI ou Panasonic System Communications Company Europe Panasonic System Communications Company Europe (referred to as “Panasonic”) will repair this product (other than software, which is treated in a different section of this warranty) with new or refurbished parts, from the date of original purchase in the event of a defect in materials or workmanship.
LIMITED WARRANTY Panasonic System Communications Company Europe THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/ SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/ SYSTEMS*4. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
Panasonic System Communications Company Europe T/ HE and d/or ory ed m Pre-installed software Pre-installed software means the software shipped pre-loaded by Panasonic, not that loaded by any third party or selling agent. Panasonic and its suppliers makes no warranty, either express, implied or statutory, with respect to software provided with the Product and licensed to Purchaser, its quality, performance, merchantability, or fitness for a particular purpose.
LIMITED WARRANTY For Australia Personal / Notebook Computers - 36 Month Warranty from Date of Purchase 1. Subject to the conditions of this warranty Panasonic or it’s Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. e he d oes on, s ons m the If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre.
Panasonic Corporation Panasonic System Communications Company of North America 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Importer’s name & address pursuant to the EU GPSD (General Product Safety Directive) 2001/95/EC Art.5 Panasonic System Communications Company Europe, Panasonic Marketing Europe GmbH Hagenauer Straße 43 65203 Wiesbaden Germany Panasonic Australia Pty.