Operating Instructions

28
Useful Information
Installing Software
D
Touch [Restart] of the “Manage the TPM security hardware” screen.
The computer will restart.
E
When “TPM conguration change was requested to ...” is displayed, press
F12
.
Windows will start.
F
When “TPM is ready” appears, touch [Close].
1 Turn on the computer, and press
F2
or
Del
while [Panasonic] boot
screen is displayed.
The Setup Utility starts up.
l
If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2
or
Del
.
l
If the password is requested, enter the Supervisor Password.
2 Write down all of the contents of the Setup Utility and press
F9
.
At the conrmation message, select [Yes] and press
Enter
.
3 Press
F10
.
At the conrmation message, select [Yes] and press
Enter
.
Computer will restart.
4 Press
F2
or
Del
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
l
If the password is requested, enter the Supervisor Password.
5 Select the [Exit] menu, then select [Recovery Partition] and press
Enter
.
6 Touch [Reinstall Windows] and touch [Next].
The License Agreement screen appears.
7 Touch [YES].
The License Agreement screen appears.
8 Touch [Yes, I agree to the provisions above and wish to continue!] and
touch [Next].
9 Select the setting and touch [Next].
l
[Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to “To
change the partition structure” (
è
page 21).
l
[Reinstall to the System and OS partitions.]
*1
Select this option when the ash memory has already been divided into several parti-
tions. For how to create a new partition, refer to “To change the partition structure” (
è
page 21 ).
You can keep the partition structure.
*1
This does not appear if Windows cannot be installed to the recovery partition and the area us-
able by Windows.
10 At the conrmation message, touch [YES].
11 Select OS (32bit or 64bit) and touch [OK].
12 At the conrmation message, touch [YES].
Installation starts according to the instructions on the screen. (It will take approximately 20
minutes.)
l
Do not interrupt installation, for example by turning off the computer or pressing
Ctrl
+
Alt
+
Del
.
DFQW5716XAT_FZ-G1mk1_8_7_OI_M.indb 28 2013/05/09 18:39:56