Operation Manual

42
Useful Information
Installing Software
11
<For localized OS model>
Select OS (32bit or 64bit) and touch [OK].
<For MUI OS model>
Select language and OS (32bit or 64bit), then touch [OK].
12 At the confi rmation message, touch [YES].
Installation starts according to the instructions on the screen. (It will take
approximately 20 minutes.)

Do not interrupt installation, for example by turning off the computer or
performing other operation.

Otherwise installation may become unavailable as Windows may not
start up or the data may be corrupted.
13 When Ending process screen is displayed, touch [OK] to
turn off the computer.
14 Turn on the computer.

If the password is requested, enter the Supervisor Password.
15 Perform the “First-time Operation” (

page 26).
NOTE

The date and time, and the time zone may not be correct.
Be sure to set them correctly.
16 Start the Setup Utility and change the settings as neces-
sary.
17 Perform Windows Update.
18
<Only for model with TPM> Clear TPM
(

page 40).

Using Recovery Disc
Use the Recovery Disc in the following conditions.

You have forgotten the administrator password.

Installation is not complete. The recovery partition in the fl ash memory may be
broken.

<Only for Windows 7 downgrade model>
To change OS from Windows 7 to Windows 8.1, or vice versa.
NOTE

To change OS from 32 bit to 64 bit, or vice versa, install OS using
the recovery partition in the fl ash memory.
CPE02825ZA_FZ-M1mk1-8.1_OI_E.indb 42CPE02825ZA_FZ-M1mk1-8.1_OI_E.indb 42 2014/02/14 13:03:372014/02/14 13:03:37