Operating Instructions
Table Of Contents
- Table of Contents
- Introduction
- Getting started
- Confirming the included items
- Description of parts
- Opening and closing the interface cover
- Removing and attaching the battery cover
- Installing SIM cards (models supporting cellular transmission only)
- Installing an SD card
- Installing and removing the battery
- Replacing the battery (Battery warm swap)
- Charging the battery
- Turning the unit on and off
- Screen description
- Input
- Connectivity
- Security
- Settings
- Apps
- Camera
- Barcode reader
- NFC card reader/writer
- Hardware diagnostics
- Supplementary items
- Troubleshooting
- Appendix
Wi-Fi
You can use the unit to connect to a wireless LAN access point and access emails and the Internet.
Note
• The Wi-Fi antenna is contained in the gray area indicated in the illustration below. Covering the area
around the antenna with your hand may affect the signal quality.
Turning Wi-Fi on and off
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ®
[Wi-Fi].
2. Tap the switch to turn Wi-Fi on or off.
Connecting to a Wi-Fi access point
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ®
[Wi-Fi].
• Make sure that Wi-Fi is turned on.
2. Select the desired network name.
• If the desired network name is not displayed, you may need to enter the network name (SSID)
manually. See “Entering the network name (SSID) manually” (page 30) for more information.
3. If you are connecting to a network with security protection, enter the password.
4. Tap [CONNECT].
Entering the network name (SSID) manually
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ®
[Wi-Fi].
• Make sure that Wi-Fi is turned on.
2. Tap [Add network].
3. Enter the network name (SSID), then select the network’s security type and enter the password, if
required.
4. Tap [SAVE].
30 Operating Instructions - Reference Manual
Connectivity