Operating Instructions
Table Of Contents
- Table of Contents
- Introduction
- Getting started
- Confirming the included items
- Description of parts
- Opening and closing the interface cover
- Removing and attaching the battery cover
- Installing SIM cards (models supporting cellular transmission only)
- Installing an SD card
- Installing and removing the battery
- Replacing the battery (Battery warm swap)
- Charging the battery
- Turning the unit on and off
- Screen description
- Input
- Connectivity
- Security
- Settings
- Apps
- Camera
- Barcode reader
- NFC card reader/writer
- Hardware diagnostics
- Supplementary items
- Troubleshooting
- Appendix
Barcode reader
Configuring the barcode reader
Barcode reader settings
1. Swipe up the home screen, and then in the app list, tap [Barcode Reader].
2. Select the desired settings and then configure them according to your needs.
Triggering the barcode reader
You can use the [UserButtonManager] app to configure which button is used to start scanning the
barcode. See “Changing the functions assigned to the buttons” (page 40) for more information.
Using the barcode reader
Typically, scanned barcodes are entered into the currently selected text field of the app that is in the
foreground.
About the demo app
You can try using the barcode reader by launching the demo app.
1. Swipe up the home screen, and then in the app list, tap [Barcode Reader] ® ® [Demo].
Note
• Although no functions are assigned to the side buttons by default, the barcode scan function is
assigned to them in the demo app. Pressing the buttons emits a laser. Take care not to look directly
at the laser or point it at other people’s eyes. Doing so will cause damage to the eyes.
Operating Instructions - Reference Manual 51
Barcode reader