User Manual

SQT1298 (ENG)

Names and Functions of

Components

1 Lens surface

2 Aperture ring

Rotate this to adjust the aperture value.

• If you set the camera to Aperture-Priority AE Mode or

Manual Exposure Mode, the aperture value of the ring will

be enabled.

• If you set the position of the aperture ring to [A], the

aperture value of the camera will be enabled.

3 Focus ring

Rotate to focus when taking pictures with manual focus (MF).

4 [AF/MF] switch

This allows you to switch between Auto Focus (AF) and

Manual Focus (MF).

• When either the [AF/MF] switch of the lens or the setting of

the camera is set to [MF], Manual Focus (MF) is enabled.

5 Lens fitting mark

6 Contact points

7 Lens mount rubber

Note

• When you take pictures with the camera’s flash, the

periphery of the screen may appear dark. In that case, we

recommend using an external flash.

• In very quiet situations Auto Focus operating sounds may

be recorded during motion picture recording. This is not a

malfunction. In such situations, switching to Manual Focus

will improve the situation.

• The aperture can be adjusted with the aperture ring only

when a Panasonic digital camera is attached to the lens.

(As of June 2016)

1 2 3

6 7

SQT1298_ENG_SPA.book 6 ページ２０１６年５月２４日　火曜日　午後２時２２分