User Manual

- 185 -
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the wireless access point is not compatible with WPS:
“Searching for wireless access points to set up a connection” (l 186)
1 Press Wi-Fi button on this unit.
2 Touch [Wi-Fi Setup].
3 Touch [Set Wireless Access Point].
4 Touch the part with no display of a wireless
access point.
For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 193.
5 Touch [Easy Connection (WPS)].
6 Set the wireless access point to waiting for WPS.
For further details, please read the operating instructions for the
wireless access point. (When using a tethering connection, please
read the operating instructions for the smartphone.)
A message is displayed when the connection is complete. Touch
[EXIT], and exit [Set Wireless Access Point].
A message is displayed when the connection attempt fails. Touch
[EXIT], and set the connection again.
[Easy Connection (WPS)]
A [Delete]
B [EXIT]