User Manual

- 83 -
≥ series/ series
When [REC FORMAT] is set to [4K MP4]
Set the recording format to 2160/25p (72 Mbps).
≥ This is a recording format suitable for editing images.
This format can record 4K motion pictures (3840k2160/25p), which deliver a resolution four
times higher than that of full high-definition motion pictures.
≥ When [REC FORMAT] is set to [MP4/iFrame]
*1 You can record motion pictures in 1080/50p (1920k1080/50 progressive), the best AVCHD
picture quality for this unit.
*2 [1080/50M]/[1080/28M] and [720] are recording modes suitable for playing back or editing on a
PC.
*3 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.
≥ Recordable time using the battery (l 13)
≥ series/
This function’s default setting is [HG] mode.
≥ Please refer to page 243 for details about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,
mosaic-type noise may appear at playback.
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC FORMAT] to [AVCHD]. (l 82)
≥ Insert an SD card.
≥ is displayed on the screen. will disappear when space in the built-in memory is gone
and the recording to the SD card starts.
≥ Relay Recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (l 126, 134)
≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by touching
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
≥ Still pictures are recorded to the SD card after Relay Recording.
[1080/50M]
*2
: Set the recording format to 1080/50p (50 Mbps).
[1080/28M]
*2
: Set the recording format to 1080/50p (28 Mbps).
[720]
*2
: Set the recording format to 720/25p.
[iFrame]
*3
: Set the recording format to iFrame.
//
[RELAY REC]
: [RECORD SETUP] # [RELAY REC] # [ON]
WX970
VX870
V770
V760
WX970M
VX870M
V770MV770M
MENU