User Guide

- 146 -
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
∫ If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the smartphone.
≥ Proceed to “Using [Link to Cell] with a direct connection”. (l 147)
∫ If the device is Android (non-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connection.
Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (
l 187)
≥ The default setting for [Direct Connection Password] is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥ When [Direct Connection Password] is set to [OFF]
j Connecting with [Direct Connection Password] set to [OFF] (l 181)
≥ When [Direct Connection Password] is set to [ON]
[HC-WX970PP]/[HC-VX870PP]/[HC-V770PP]:
Enter SSID and Password or scan QR code to connect.
j [WPS Connection] (l 182)
j Connecting with QR code (l 182)
j Connecting by entering an SSID and Password (l 183)
When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a direct connection”.
(l 147)
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [WPS Connection] (l 178)
≥ Searching for wireless access points to set up a connection (l 179)
≥ Setting up a connection manually (l 180)
When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a wireless access point
connection”. (l 148)
≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 176)
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Setting up a Wi-Fi connection via a wireless access point