User Guide

Table Of Contents

- 85 -

This will change the setting of the Image Stabilizer function and Maximum zoom ratio to the one

appropriate for the recording when a Wide Conversion Lens (optional) is attached to this unit.

≥ The following functions will not work:

j Video light

j AF ASSIST LAMP

j /

Night Mode ([Infrared])

≥ In Motion Picture Recording Mode, [ZOOM MODE] (l 80) is fixed to [Opt.Zoom 10k] (up to

10k). In Still Picture Recording Mode, a zoom magnification of up to 10k is possible.

This will reduce the wind noise coming into the built-in microphones while maintaining the realism.

≥ Switch to Manual Mode. (l 64)

≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon

displayed on the screen. In descending order of the strength of the reduction effect, / /

/ is displayed.

≥ When [Normal] is set, will be displayed on the screen.

≥ This function’s default setting is [Normal].

≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is

set to [Strong], and the setting cannot be changed.

≥ You may not see the full effect depending on the recording conditions.

≥ This function cannot be set when using an external microphone.

This function reduces the low-pitched sound when using an external microphone.

≥ Switch to Manual Mode. (l 64)

≥ This function can be set only when using an external microphone.

[WIDE CONV. LENS SET]

: [RECORD SETUP] # [WIDE CONV. LENS SET] # [ON]

[Wind Noise Canceler]

: [RECORD SETUP] # [Wind Noise Canceler] # desired setting

[Strong]: When a strong wind is detected, this option effectively reduces the

wind noise by minimising the low-pitched sound.

[Normal]: This option extracts and reduces only the wind noise without

deteriorating the sound quality.

[OFF]: Cancel the setting.

[LOWCUT]

: [RECORD SETUP] # [LOWCUT] # [ON]

WX970

VX870