Operating Instructions High Definition Video Camera Model No. HC-V770 HC-V777 HC-V770M HC-V760 4K Video Camera Model No. HC-WX970 HC-WX979 HC-WX970M HC-VX870 HC-VX878 HC-VX870M Please read these instructions carefully before using this product, and save this manual for future use.
Read this first or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-built-in memory related component). ∫ About the recording format for recording motion pictures WX970 series/ VX870 series You can select from AVCHD*1, 4K MP4*2, MP4*2 or iFrame*2 recording formats to record motion pictures using this unit.
When condensation has occurred, remove the battery and/or the AC adapter and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally. ∫ Cards that you can use with this unit SD Memory Card, SDHC Memory Card and SDXC Memory Card ≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
Contents Read this first ................................................. 2 Preparation Names and Functions of Main Parts ............ 7 Power supply................................................ 11 Inserting/removing the battery ............... 11 Charging the battery .............................. 12 Charging and recording time ................. 13 Recording to a card ..................................... 15 Cards that you can use with this unit ..... 15 Inserting/removing an SD card ..............
Advanced (Playback) Copy/Dubbing Playback Operations ................................... 95 Motion picture playback using operation icon ........................................ 95 Creating still picture from motion picture ........................................ 97 Highlight & Time Frame Index ............... 97 Repeat Playback ................................... 98 Resuming the previous playback........... 98 Setting the playback speed of FULL HD Slow Motion Video .................
Setting Up a Wi-Fi Connection ................. 182 Using the [Wi-Fi Setup Wizard] to set up a connection ............................. 183 Connecting to a wireless access point......................................... 185 Setting up a direct connection to a smartphone.......................................... 188 Connecting from the history................. 190 If the Wi-Fi connection cannot be established .......................................... 191 How to Use the [Wi-Fi Setup] Menu .........
Preparation Names and Functions of Main Parts 1 モバヷ 7 1 2 3 4 8 11 23 ヮリヤ 4 12 5 13 6 14 15 9 10 Speaker Shoe adaptor release lever [SHOE ADAPTOR RELEASE] (l 247) Recording/playback button [ / ] (l 18) Level Shot Function button [ ] (l 45) 5 Power button [ ] (l 17) 6 Battery release lever [BATT] (l 11) 7 USB terminal [ ] (l 137, 144, 219) 8 Micro HDMI connector [HDMI] (l 129) 9 A/V connector [A/V] (l 129, 146) 10 Microphone terminal [MIC] ≥ A compatible plug-in powered microphone can be u
16 17 18 22 23 19 20 24 25 21 26 27 22 Tripod receptacle ≥ Attaching a tripod with a screw length of 5.5 mm or more may damage the unit.
28 29 30 28 Grip belt Adjust the length of the grip belt so that it fits your hand. 1 2 3 29 Headphone terminal [ ] (l 79) ≥ Excessive sound pressure from earphones and headphones can cause hearing loss. ≥ Listening at full volume for long periods may damage the user’s ears. 30 DC input terminal [DC IN] (l 12) ≥ Do not use any other AC adaptors except the supplied one. Flip the belt. Adjust the length. Replace the belt.
WX970 series/ VX870 series/ V770 series 31 33 32 31 Wi-Fi button [Wi-Fi] (l 152, 159, 162, 169, 171, 175, 190, 193) 32 Wi-Fi Transmitter (l 151) 33 NFC touch area [ ] (l 154, 163, 202) WX970 series/ VX870 series 34 34 Infrared light (l 78) WX970 series 35 36 35 Sub Camera (l 46) 36 Sub Camera dial (l 47) - 10 -
Preparation Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBT190/VW-VBT380. ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBT190/VW-VBT380) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic.
Charging the battery When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Do not use the AC adaptor/DC cable with any other equipment as it is designed only for this unit. Also, do not use the AC adaptor/DC cable from other equipment with this unit.
∫ To charge by connecting to other device It is possible to charge by connecting to other device with the USB cable (supplied). Please refer to page 220. ≥ ≥ ≥ ≥ ≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 239. We recommend using Panasonic batteries (l 13). If you use other batteries, we cannot guarantee the quality of this product. Do not heat or expose to flame.
Battery model number [Voltage/Capacity (minimum)] Charging time Recording format [AVCHD] VW-VBT380 (optional) [3.
Preparation Recording to a card The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an SD card, read the following. Cards that you can use with this unit Card type Capacity SD Memory Card 512 MB to 2 GB SDHC Memory Card 4 GB to 32 GB SDXC Memory Card 48 GB/64 GB ≥ Please check the latest information on the support website below. http://panasonic.jp/support/global/cs/e_cam (This website is in English only.
Use of a non-compatible card may cause recording to stop suddenly. j FULL HD Slow Motion Video Mode (l 62) j WX970 series/ VX870 series 4K Photo Mode (l 63) j WX970 series/ VX870 series/ V770 series When [Backup for Twin Camera] is set to [ON] (l 52) Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 40) When the SD card is formatted, all of the recorded data is deleted.
Preparation Turning the unit on/off You can turn the unit on and off using the power button or by opening and closing the LCD monitor. Turning the unit on and off with the power button Open the LCD monitor and press the power button to turn on the unit. To turn off the unit Hold down the power button until the status indicator goes off. A The status indicator lights on.
Preparation Selecting a mode You can switch this unit between Recording Mode (Motion Picture Recording Mode/Still Picture Recording Mode) and Playback Mode by pressing the recording/playback button. If you touch the recording mode switching icon in Recording Mode, this unit can be switched between Motion Picture Recording Mode and Still Picture Recording Mode. Motion Picture Recording Mode (l 25) Recording motion pictures. Still Picture Recording Mode (l 27) Recording still pictures.
To display the recording mode switching icon Display of the recording mode switching icon will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen. ≥ If the recording start/stop button is pressed in Still Picture Recording Mode or Playback Mode, this unit will be switched to Motion Picture Recording Mode.
About the Touch Menu Touch (left side)/ operation icons. (right side) of on the Touch Menu to switch the ≥ It is also possible to switch the operation icons by sliding the Touch Menu right or left while touching it. A Touch Menu T W Recording Mode T Playback Mode FOCUS WB W ALL SHTR MENU IRIS MENU You can change the operation icons to display.
Preparation Setting date and time The clock is not set at the time of purchase. Make sure to set the clock. ≥ When you turn on this unit, the message “Set home region and date/time.” may be displayed. Select [YES], and follow the steps below to make these settings: j Step 3 in [SET WORLD TIME] (l 33) j Steps 2–3 of “Setting date and time” 1 Select the menu. (l 32) MENU 2 : [SETUP] # [CLOCK SET] Touch the date or time to be set, then set the desired value using / .
Basic Before recording ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Recording button icon A when holding the unit at waist level. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.
∫ Attaching/Removing the lens hood [WX970]series/[VX870]series This will reduce the extra light entering the lens in bright sunlight or backlight etc., making it possible to take clearer pictures. How to attach the lens hood 1 Align the lens hood with this unit. ≥ Attach the lens hood so that you can see its LOCK and UNLOCK arrows from above. 2 Rotate the lens hood’s mounting ring A to the LOCK side to tighten it.
Basic Selecting a media to record [WX970M]/[VX870M]/[V770M] The card and built-in memory can be selected separately to record motion pictures or still pictures. 1 2 Set this unit to Recording Mode. (l 18) Select the menu. (l 32) MENU 3 : [MEDIA SELECT] Touch the media to record motion pictures or still pictures. ≥ The media selected separately for motion pictures or still pictures is highlighted in yellow. 4 Touch [ENTER].
Basic Recording motion pictures 1 2 A B 3 Open the LCD monitor, and set this unit to Motion Picture Recording Mode. (l 18) Press the recording start/stop button to start recording. T W Recording button icon When you begin recording, ; changes to ¥. Press the recording start/stop button again to pause recording. ≥ Recording can also be started/stopped by touching the recording button icon.
≥ If the recording/playback button is pressed during motion picture recording, the recording will stop and this unit will be switched to Playback Mode. ≥ To change the recording format, change the [REC FORMAT] or [REC MODE]. (l 82) ≥ Still pictures can be recorded while recording the motion picture. (l 28) ≥ The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene. Scenes exceeding 4 GB (approx.) or 30 minutes (approx.
Basic Recording still pictures 1 2 Open the LCD monitor, and set this unit to Still Picture Recording Mode. (l 18) Press the button halfway. (For Auto Focus only) Focus indication: A B 3 Press the Focus indication: ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful. Focus area (area inside brackets) button fully.
∫ About the screen indications in Still Picture Recording Mode R3000 Still picture operation indicator (l 225) R3000 2.1M MEGA 2.1M MEGA Remaining number of still pictures ≥ Flashes in red when [0] appears. Size of still pictures (l 92) MEGA Optical Image Stabilizer (l 27) Optical Image Stabilizer (l 72) ≥ Screen display will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen.
Basic Motion picture/Still picture playback 1 2 Set this unit to Playback Mode (l 18). Touch the play mode select icon A (l 20). ≥ You can also set by touching MENU , selecting [VIDEO SETUP] or [PHOTO SETUP] # [MEDIA, VIDEO/PICTURE]. (l 32) 3 ALL WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 Select the still picture C or the recording format of the motion picture D you wish to play back.
≥ When [MP4/iFrame] is selected [ALL MP4/iFrame]/[1080/50p]/[1080/25p]/[720/25p]/[360/25p]/[iFrame] ≥ The recording mode icon B is displayed in the thumbnail display when the item is touched.
∫ Change the thumbnail display While the thumbnail is displayed, the thumbnail display changes in the following order if the zoom lever is operated to side or side. 20 scenes () 9 scenes () 1 scene () Highlight & Time Frame Index* (l 97) * Highlight & Time Frame Index can only set in Motion Picture Playback Mode. ≥ If you set this unit to Recording Mode or Playback Mode by pressing the recording/playback button, you will return to the 9 scenes display.
Basic Using the menu screen ≥ Touch 1 (left side)/ Touch MENU (right side) of on the Touch Menu to display . ∫ About Touch the top menu A. 3 Touch the submenu B. ≥ Next (previous) page is displayed by touching / . 4 5 . (l 20) guide display After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear. ≥ After the messages have been displayed, the guide display is cancelled.
Basic Using the Setup Menu [DISPLAY] Set the display method for the screen information display. MENU : [SETUP] # [DISPLAY] # desired setting [5 SEC.]: Information is displayed on the screen for 5 seconds after starting the Motion Picture Recording Mode or Still Picture Recording Mode, starting to playback, or touching the screen. [ON]: Constantly displayed. [CLOCK SET] Please refer to page 21.
4 (Only when setting the region of your travel destination) Touch [DESTINATION]. ≥ Touch [ENTER]. ≥ When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1. 5 (Only when setting the region of your travel destination) Touch / to select your travel destination and touch [ENTER].
[DATE/TIME] It is possible to change the date and time display mode. MENU : [SETUP] # [DATE/TIME] # desired display [DATE]/[D/T]/[OFF] ≥ The date and time are not displayed while the recording mode switching icon is displayed. (l 18) ≥ When the Touch Shutter is enabled, the recording mode switching icon is constantly displayed. This causes the date and time to disappear from the screen. [DATE FORMAT] It is possible to change the date format.
[ECONOMY (BATT)] When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. MENU : [SETUP] # [ECONOMY (BATT)] # [ON] ≥ This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following cases: j Using the AC adaptor* j Using the USB cable for PC etc.
[ALERT SOUND] Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. When [OFF] is selected, the sound is not output at the start/end of recording, etc. MENU : [SETUP] # [ALERT SOUND] # desired setting (Volume low)/ (Volume high)/[OFF] 2 Beeps for 4 times When an error occurs, follow the instructions displayed on the screen. (l 229) ≥ Refer to page 94 when changing the shutter sound setting.
[POWER LCD] This makes it easier to view the LCD monitor in bright places including outdoors. MENU : [SETUP] # [POWER LCD] # desired setting +1 (Makes brighter)/ 0 (Normal)/ -1 (Makes less bright) ≥ These settings will not affect the images actually recorded. ≥ When the AC adaptor is in use, the LCD monitor is set to +1 automatically. ≥ Recordable time with the battery is shortened when the LCD is made brighter. ≥ When the video light is set to ([ON]) or ([AUTO]) and it is lit, it cannot be set.
[INITIAL SET] Set to [YES] for changing the menu settings back to the default condition. MENU : [SETUP] # [INITIAL SET] ≥ Settings for [MEDIA SELECT]*, [CLOCK SET] and [LANGUAGE] will not be changed. * For users who have WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 , this menu is not displayed. ≥ If you restore the default settings, this unit will switch to the Motion Picture Recording Mode.
[NUMBER RESET] Set the file number of the next 4K MP4 scene*, MP4/iFrame scene and still picture to be recorded to 0001. * WX970 series/ VX870 series only MENU : [SETUP] # [NUMBER RESET] ≥ Folder number is updated and file number will start from 0001. (l 221) ≥ To reset the folder number, format the SD card and built-in memory, and then perform [NUMBER RESET]. ≥ The file numbers of still pictures you record in Stop Motion Animation Assist Mode are not reset.
[MEDIA STATUS] The used space and remaining recordable time of the SD card and built-in memory can be checked. MENU : [SETUP] # [MEDIA STATUS] ≥ WX970M / VX870M / V770M Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the display for the built-in memory. ≥ The remaining recordable time in the currently set Recording Mode is displayed only in the Motion Picture Recording Mode. ≥ Touch [EXIT] to close the indication.
[O.I.S. DEMO] This item is used to start the Optical Image Stabilizer demo. MENU : [SETUP] # [O.I.S. DEMO] ≥ Touch [O.I.S. DEMO], the demonstration automatically starts. When you touch [EXIT], the demonstration will be cancelled. [Eye-Fi TRANSFER] This item is displayed only when an Eye-Fi card is inserted. Please refer to page 147. [Eye-Fi DIRECT] This item is displayed only when an Eye-Fi card is inserted. Please refer to page 148.
[ONLINE MANUAL] You can check how to access the website where you can download the Operating Instructions (PDF format). MENU : [SETUP] # [ONLINE MANUAL] # desired access method [URL display]: Displays the URL of the website on the LCD monitor of this unit. [USB connect]: Displays the website on a PC connected to this unit with the USB cable. [QR code]: Displays the QR code of the website on the LCD monitor of this unit.
Advanced (Recording) Using the zoom Zoom lever/Zoom button icons T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) T W T 6 W T W A Zoom bar ≥ Maximum zoom ratio for recording motion pictures can be set with [ZOOM MODE]. (l 81) ∫ About the zoom bar The zoom bar is displayed during the zoom operation. W T B C Optical Zoom Motion Picture Recording Mode: i.
Advanced (Recording) Level Shot Function This function detects the horizontal tilt of the unit, and automatically corrects it to the level position. (When setting (Normal)) (When setting (Strong)) : With Level Shot Function : Without Level Shot Function Level Shot Function button Each press of this button switches Level Shot Function. (Normal) # (Strong) # Off (Normal): Corrects the tilt. (Strong): Strengthen tilt correction. Off: Cancel the setting.
Advanced (Recording) Recording with the Sub Camera (Twin Camera) [WX970] series Using the Sub Camera and the Main Camera, you can record two images simultaneously. (Twin Camera) Use the Sub Camera to enjoy recording yourself, a family member next to you or scenery different from that seen from the Main Camera. A Recording a family member next to you Recording scenery Sub Camera Recording yourself B Sub Window ≥ The image of the Sub Camera is displayed on the Sub Window.
2 Rotate the Sub Camera dial to adjust its up/ down angle. Rotating the Sub Camera dial to the left : The Sub Camera points down. Rotating the Sub Camera dial to the right : The Sub Camera points up. ≥ You can adjust the angle up or down to approximately 20e from the position F. E 3 Start recording. ≥ Rotate the Sub Camera to the desired position. ≥ The Sub Camera works in Auto Focus, which adjusts focus automatically. ≥ Normally, hold this unit as shown in the illustration when recording.
∫ Displaying or hiding the Sub Window Touch . ≥ Each time you touch the icon, you can display or hide the Sub Window. ≥ When the Sub Window is hidden, the image of the Sub Camera will not be recorded. To exit the Twin Camera function Rotate the Sub Camera to a position in the range C (0e to approximately 30e). ≥ It takes some time until the Sub Window appears.
Changing and adjusting the settings of the Sub Camera and the Sub Window Changing the size of the Sub Window 1 2 Touch Sub Window. Touch to select the size you want to use. ≥ If you do not touch the Sub Window or perform any touch operation for a while, the Sub Window size will change. ≥ The available sub window sizes differ as shown below.
Changing the display position of the Sub Window 1 2 Touch Sub Window. Touch the display position you want to change. ≥ Depending on the display position of the Sub Window, the positions of the icons displayed on the screen may change. Setting and adjusting the Sub Camera and the Sub Window 1 2 3 Touch Sub Window. Touch . Touch the icon you want to set or adjust. FOCUS [WB] : Adjusts the colour balance. : Adjusts the brightness. *1 [FOCUS] : Adjusts the focus.
(When [FOCUS] is touched) Touch [AF] or [AFS]. ≥ The centre of the Sub Window will be focused. [AF] (Auto Focus): Auto Focus works continuously. [AFS] (Auto Focus Single): ≥ If you select [AFS], (When is touched) Touch or Auto Focus works each time you touch [AFS]. will be constantly displayed on the recording screen. . : Enables Narration Mode. : Disables Narration Mode. ≥ Touching the screen returns you to the recording screen.
Advanced (Recording) Recording with the Backup for Twin Camera Function [WX970] series/[VX870] series/[V770] series When simultaneously recording two images with the Main Camera and Sub Camera, you can also record the Main Camera’s image as a separate scene.
≥ When recording with [Backup for Twin Camera], use an SD card conforming to Class 10 of the SD Speed Class Rating. ≥ Scenes recorded as Backup for Twin Camera and scenes that show the Sub Window’s image will be saved on the same media. This causes the remaining recordable time to be halved. ≥ When [ON] is selected, two separate dates are used to record scenes simultaneously. As a result, compared to when [OFF] is selected, recording can be performed on fewer days.
Advanced (Recording) Changing the Recording Mode 1 Touch the Recording Mode button icon. MENU 2 ≥ Touch the desired Recording Mode button icon. is available only for the WX970 series/ VX870 series. Mode *2 Intelligent Auto Intelligent Auto Plus You can add manually-adjusted brightness and colour balance settings to the Intelligent Auto Mode, and record. (l 57) Creative Control You can record motion pictures with added effects.
Intelligent Auto The following modes (appropriate for the condition) are set just by pointing the unit to what you want to record. Mode Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly. Scenery The whole landscape will be recorded vividly without whiting out the background sky, which may be very bright. *1 Spotlight Very bright object is recorded clearly. *1 Low Light It can record very clearly even in a dark room or twilight.
∫ Intelligent Auto Mode When switching to Intelligent Auto Mode, the Automatic White Balance and Auto Focus operate and automatically adjust the colour balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. ≥ WX970 series The information on this page applies only to the Main Camera. ≥ Colour balance and focus may not be adjusted automatically depending on light sources or scenes.
Intelligent Auto Plus Please refer to page 55 for details about the effect of each mode. *1 *2 (Portrait)/ (Scenery)/ (Spotlight)*1/ (Low Light)*1/ (Night Scenery)*2/ (Macro)*2/ (Normal)*1/ (Normal)*2 In Motion Picture Recording Mode only In Still Picture Recording Mode only ≥ Change the Recording Mode to 1 (When adjusting the brightness) Touch / . (l 54) . (When adjusting the colour balance) Touch . ≥ R side: Sets the balance to a reddish tone. B side: Sets the balance to a bluish tone.
MINI 1 [Miniature Effect] Touch to adjust the horizontal position of the in-focus portion. ≥ If you touch the screen, you can adjust the horizontal position of the in-focus portion. ≥ When no touch operations are performed for approximately 1 second, [Reset], [SIZE], and [ENTER] are displayed. If you touch the screen, you can readjust the horizontal position of the in-focus portion. ≥ Position of the in-focus portion will return to original position when you touch [Reset]. 2 Touch [SIZE].
8mm 1 [8mm movie] (When adjusting the brightness) Touch . ≥ The level of brightness is switched every time you touch the icon. (Standard) # (Bright) # (Dark) 2 (When adjusting the colour balance) Touch . ≥ The level of colour balance is switched every time you touch the icon. (Blue) # (Red) # (Yellow) 3 Start recording. ≥ The sound is monaural. SILN 1 [Silent movie] (When adjusting the brightness) Touch . ≥ The level of brightness is switched every time you touch the icon.
Audio cannot be recorded. [REC MODE] is set to [HA]. The shortest motion picture recording time is 1 second. The colour balance and focus may not be adjusted automatically depending on the light source or scene. If so, manually adjust those settings. (l 66, 68) ≥ WX970M / VX870M / V770M Setting Time Lapse Recording will set [RELAY REC] to [OFF]. (l 83) ≥ When recording for a long time, we recommend recording with the AC adaptor connected. ≥ ≥ ≥ ≥ HDR Movie Mode ≥ Change the Recording Mode to .
∫ To change the level of image contrast correction [HDR EFFECT] allows you to change the contrast correction level in HDR Movie Mode. ≥ Change the Recording Mode to . (l 54) 1 Select the menu. MENU 2 : [RECORD SETUP] # [HDR EFFECT] # desired setting : Sets the correction level to high. : Sets the correction level to low. Touch [ENTER]. ≥ Touch [EXIT] to complete the settings. ≥ You can also change this setting by touching its operation icon.
≥ (Sports) j During normal playback, the image movement may not look smooth. j Colour and screen brightness may change under indoor lighting. j If the brightness is insufficient, the Sports Mode does not function. The display flashes. ≥ (Portrait) j Colour and screen brightness may change under indoor lighting. ≥ (Soft Skin) j If the background or anything else in the scene has colours similar to the skin colour, they will also be smoothed. j If the brightness is insufficient, the effect may not be clear.
≥ FULL HD Slow Motion Video recording uses the following settings: j Level Shot Function: Off j [ZOOM MODE]: [Opt.Zoom 20k] j [REC FORMAT]: [MP4/iFrame]* j [REC MODE]: [1080/28M]* j [HYBRID O.I.S.]: [OFF] j [AUTO SLOW SHTR]: [OFF] * WX970 series/ VX870 series If you switch to FULL HD Slow Motion Video Mode when [REC FORMAT] is set to [4K MP4], the [REC FORMAT] setting will change to [MP4/iFrame] and the [REC MODE] setting of [1080/28M] will be selected for [MP4/iFrame].
Stop Motion Animation Assist Before recording in Stop Motion Animation Assist Mode You can create a slideshow that appears to be moving by recording the subject while moved a little at a time. ≥ Each recording group can store up to 999 still pictures recorded in Stop Motion Animation Assist Mode. ≥ WX970M / VX870M / V770M Recording groups for the SD card and the built-in memory are created separately. ≥ Change the Recording Mode to 1 2 . (l 54) Press the button to record the still pictures.
Advanced (Recording) Manual recording ≥ The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain) settings are retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. Push the Multi Manual Dial to switch to Manual Mode. ≥ When an item on the manual icon or the picture quality adjustment icon (l 91) is not selected, each time you push the Multi Manual Dial, the manual icon and the picture quality adjustment icon are displayed alternately.
White Balance Automatic White Balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. ≥ Switch to Manual Mode. (l 65) ≥ For information on how to set items with the Multi Manual Dial, refer to page 65. 1 2 Touch [WB]. Touch / FOCUS to select White Balance Mode. ≥ Touch [WB] to select the mode.
Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Switch to Manual Mode. (l 65) ≥ For information on how to set items with the Multi Manual Dial, refer to page 65. 1 2 Touch [SHTR] or [IRIS]. Touch / to adjust settings. ≥ Touch [SHTR]/[IRIS] to end the adjustment. SHTR : Shutter speed: 1/50 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/25 and 1/8000.
Manual Focus adjustment If auto focusing is difficult due to the conditions, then use Manual Focus. ≥ Switch to Manual Mode. (l 65) ≥ For information on how to set items with the Multi Manual Dial, refer to page 65. Rotate the Multi Manual Dial to set focus. 1 (When MF assist function is used) Select the menu. MENU : [RECORD SETUP] # [MF ASSIST] # [ON] ≥ Touch 2 3 to display the Manual icon. Touch [FOCUS]. Touch [MF] to change to Manual Focus. ≥ MF appears on the screen.
Using the Expanded Focus Assist function [WX970] series/[VX870] series When recording with [REC FORMAT] set to [4K MP4], you can magnify the screen to adjust the focus. It is also possible to change the magnification window’s magnification level and position. ≥ When [MF ASSIST] is set to [ON], in-focus portions are highlighted in blue. (Between 3k and 5k) (Between 5.5k and 10k) 3.0X 5.5X Magnification window [EXIT] A B C D Zoom position window [EXIT] ≥ Set [REC FORMAT] to [4K MP4].
∫ To adjust the magnification window's magnification level or position with the Multi Manual Dial 1 3.0X Push and hold the Multi Manual Dial. ≥ A portion of the screen will be magnified. A 2 Push the Multi Manual Dial. 3.0X ≥ / will be selected and highlighted in yellow. ≥ Each push of the Multi Manual Dial switches the selected icon(s). / # / # / # [EXIT] # No selection ≥ If you touch the screen, the icon selection will be cancelled. 3 [EXIT] Rotate the Multi Manual Dial to make adjustments.
Advanced (Recording) Recording with the Touch Function You can record using convenient functions just by the easy operation of touching the screen. 1 2 Touch (left side)/ (right side) of Touch Function icons. (l 20) on the Touch Menu to display Touch the Touch Function icon. (e.g. AF/AE tracking) ≥ To cancel, touch the Touch Function icon again. (Optical Image Stabilizer Lock is cancelled by releasing the finger touching .
Image Stabilizer Function Use the Image Stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer. Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer. Touch to switch the Image Stabilizer on/off. ≥ The icon at position A is switched. (Motion Picture Recording Mode) / # (setting cancelled) ≥ When [HYBRID O.I.S.] is [ON], is displayed. When [OFF], is displayed.
AF/AE tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. 1 Touch . ≥ An icon is displayed B. 2 Touch the object and lock the target. ≥ When you touch the head of the object, the target frame on the head gets locked and tracking starts. ≥ Touch the object to be changed again when you want to change the target.
Optical Image Stabilizer Lock In Motion Picture Recording Mode, you can further improve optical image stabilization by touching and holding . With this function, you can further reduce the effects of the shake that tends to occur when using zoom. 1 2 Touch to turn the Image Stabilizer on. (l 72) Touch and hold . ≥ Icon is displayed in A while you are touching and holding . ≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
Advanced (Recording) Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. 1 2 Touch (left side)/ (right side) of operation icons. (l 20) on the Touch Menu to display the Touch an operation icon. (e.g. PRE-REC) ≥ The operation icons that are displayed in the Touch Menu can be changed. ([SELECT OPERATION ICONS]: l 37) ≥ Select the operation icon again to cancel the function.
Fade When you start recording, the image/audio gradually appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The Fade setting is cancelled when the recording stops. ∫ To select the colour for fade in/out (Fade in) (Fade out) : [RECORD SETUP] # [FADE COLOUR] # [WHITE] or [BLACK] MENU ≥ The thumbnails of scenes recorded using fade in become black (or white).
≥ After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3 seconds before pressing the recording start/stop button cannot be recorded. ≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures displayed at the start of playback. Self-timer This is for recording still pictures using the timer.
Video light It is possible to record with illumination even in dark places. Each time the icon is selected, the indication changes by one setting in the following order. In motion picture recording mode: ([ON]) # ([AUTO]) # ([OFF]) In still picture recording mode: ([ON]) # ([OFF]) : Always on. : : Turns on/off automatically according to brightness of the surroundings. Cancel the setting. ≥ When the battery is low and the light cannot be lit, the will be displayed on the screen.
V770 series/ V760 Each time the icon is selected, the indication changes by one setting in the following order: ([COLOUR]) # [OFF] ([COLOUR]): Allows you to record colour images in very low light situations. OFF: Cancel the setting. ≥ Using a tripod is recommended. ≥ In darker areas, Auto Focus may focus a bit slower. This is normal. Night Mode ([COLOUR]) ≥ Recorded scene is seen as if frames were missed. ≥ If set in a bright place, the screen may become washed out for a while.
Advanced (Recording) Recording functions of menus [SCENE MODE] This function is identical to Scene Mode in Recording Mode. (l 54) The shutter speed and aperture, etc. are automatically adjusted to match the scene you want to record. ≥ This item is displayed in the menu only when [Time Lapse Rec] in Creative Control Mode is set.
[ZOOM MODE] Set the maximum zoom ratio for the Motion Picture Recording Mode. MENU : [RECORD SETUP] # [ZOOM MODE] # desired setting WX970 / WX970M / VX870 / VX870M [Opt.Zoom 20k]: [i.Zoom 25k]*1: Optical zoom only (Up to 20k) This zoom function allows you to maintain 4K picture quality. (Up to 25k) [i.Zoom 40k]*2: This zoom function allows you to maintain high-definition picture quality. (Up to 40k) [D.Zoom 60k]: Digital zoom (Up to 60k) [D.
V777 [Opt.Zoom 20k]: Optical zoom only (Up to 20k) [i.Zoom 50k]: This zoom function allows you to maintain high-definition picture quality. (Up to 50k) [D.Zoom 60k]: Digital zoom (Up to 60k) [D.Zoom 250k]: Digital zoom (Up to 250k) ≥ The larger the digital zoom magnification, the more the image quality is degraded. ≥ This function cannot be used in Still Picture Recording Mode. [REC FORMAT] Switch the recording format of motion picture.
≥ WX970 series/ VX870 series When [REC FORMAT] is set to [4K MP4] Set the recording format to 2160/25p (72 Mbps). ≥ This is a recording format suitable for editing images. This format can record 4K motion pictures (3840k2160/25p), which deliver a resolution four times higher than that of full high-definition motion pictures. ≥ When [REC FORMAT] is set to [MP4/iFrame] [1080/50M]*2: Set the recording format to 1080/50p (50 Mbps). [1080/28M]*2: Set the recording format to 1080/50p (28 Mbps).
≥ is displayed on the thumbnail display during the playback of the scene that was relayrecorded on the built-in memory. [FACE FRAMING] Detected faces appear with frames. MENU : [RECORD SETUP] # [FACE FRAMING] # desired setting [PRIMARY]: Only the prioritised face framing is displayed. [ALL]: All face detection framings are displayed. [OFF]: Cancel the setting. ≥ Up to 5 frames are indicated. Larger faces and faces nearer to the centre of the screen take preference over others.
[LEVEL GAUGE] This function displays the horizontal/vertical tilt of the unit with the electronic level. MENU : [RECORD SETUP] # [LEVEL GAUGE] # [ON] ∫ To correct the tilt (Horizontal direction) (Vertical direction) When correcting the leftward tilt When correcting the downward tilt ≥ The horizontal tilt display A and vertical tilt display B appear yellow when there is a tilt, and appear green when there is almost no tilt.
[AUTO SLOW SHTR] You can record bright pictures even in dark places by slowing the shutter speed. ≥ Switch to Manual Mode. (l 65) MENU : [RECORD SETUP] # [AUTO SLOW SHTR] # [ON] ≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness. ≥ This function cannot be used in Still Picture Recording Mode. ≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed and afterimages may appear.
[WIDE CONV. LENS SET] This will change the setting of the Image Stabilizer function and Maximum zoom ratio to the one appropriate for the recording when a Wide Conversion Lens (optional) is attached to this unit. MENU : [RECORD SETUP] # [WIDE CONV. LENS SET] # [ON] ≥ The following functions will not work: j Video light j AF ASSIST LAMP j WX970 series/ VX870 series Night Mode ([Infrared]) ≥ In Motion Picture Recording Mode, [ZOOM MODE] (l 81) is fixed to [Opt.Zoom 10k] (up to 10k).
[Sound Scene Select] You can set the built-in microphone's sound quality as appropriate for the scene you want to record. ≥ Set [MIC SETUP] to [SURROUND] or [STEREO MIC]. (l 89) 1 Select the menu. MENU 2 : [RECORD SETUP] # [Sound Scene Select] # desired setting [Auto]: Records sounds with standard settings. [Music]: For recording scenes in which you need to cover a wide sound range and a wide volume range, such as music concerts.
(When [Directional] is selected in Step 2) Select an item. [SURROUND]/[STEREO]: Records sounds with the setting of [MIC SETUP] ([SURROUND] or [STEREO MIC]). [MONO]: Records sounds from all directions without setting specific directivity. 4 Touch [EXIT]. appears on the screen. ≥ ≥ Depending on the recording condition or sound quality, the desired effect may not be achieved. ≥ The option is set to [Auto] when an external microphone is connected.
≥ If you wish to record higher quality sound and maintain realism even when zooming in, for instance, when recording a music recital, we recommend setting [MIC SETUP] to [SURROUND]. ≥ [STEREO MIC] will be selected in the following cases: j WX970 series/ VX870 series When [REC FORMAT] is set to [4K MP4] j When [REC FORMAT] is set to [MP4/iFrame] ≥ When [Directional] in [Customize] in [Sound Scene Select] is set to [MONO], [SURROUND] and [STEREO MIC] cannot be set.
[PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ This setting is retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. ≥ Switch to Manual Mode. (l 65) 1 Select the menu. MENU 2 3 4 : [RECORD SETUP] # [PICTURE ADJUST] Touch the desired setting items.
5 Push the Multi Manual Dial to set. appears on the screen. ≥ [PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. MENU : [PICTURE] # [PICTURE SIZE] # desired setting ≥ The number of recording pixels that can be set changes depending on selected screen aspect ratio. (l 94) ∫ Picture size and Maximum zoom ratio in Still Picture Recording Mode WX970 series/ VX870 series Picture size 20.4M 5216k3912 10.9M 3808k2856 0.3M 640k480 20M 5472k3648 10.
∫ Picture size in Motion Picture Recording Mode ≥ Set this unit to Motion Picture Recording Mode (l 18) MENU : [PICTURE] # [PICTURE SIZE] # desired setting WX970 series/ VX870 series (When [REC FORMAT] is set to [4K MP4]) Picture size 20.4M 6016k3384 8.3M 3840k2160 Aspect ratio 16:9 (When [REC FORMAT] is set to [AVCHD] or [MP4/iFrame]) Picture size 14M 4992k2808 2.1M 1920k1080 Aspect ratio 16:9 V770 series/ V760 Picture size 12.6M 4736k2664 2.
[ASPECT RATIO] This allows you to select the aspect ratio of the pictures to suit printing or the playback method. MENU : [PICTURE] # [ASPECT RATIO] # desired setting [4:3]: Aspect ratio of 4:3 television [3:2]: Aspect ratio of conventional film camera or prints (such as L-size print) [16:9]: Aspect ratio of high-definition television, etc. ≥ This function’s default setting is [16:9]. ≥ When the aspect ratio is set to [4:3] or [3:2], black bands may appear on the left and right of the screen.
Advanced (Playback) Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 29. Playback operation Playback display During Playback Operating steps Touch the LCD monitor and slide from right to left (from left to right) during playback. Skip playback (to the start of a scene) During Pause Slow-motion Playback With the playback paused, continue touching .( is for slow rewind playback) Playback is slow while touching.
Playback operation Playback display Operating steps Frame-by-frame Playback With the playback paused, touch . (Touch to advance the frames one at a time in the reverse direction.) ≥ Normal playback is restored when you touch . ≥ When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds. ≥ WX970 series/ VX870 series When the frames of 4K MP4 scenes are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds.
Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. Scene type Picture size 4K MP4 scenes* 8.3M (3840k2160) AVCHD scenes Scenes recorded as Backup for Twin Camera Scenes recorded in the recording format [MP4/iFrame] Scenes saved in MP4 (1920k1080/25p) Scenes saved in MP4 (1280k720/25p) 2.1M (1920k1080) Scenes saved in MP4 (640k360/25p) 0.2M (640k360) WX970 series/ VX870 series only * Press the playback.
3 (When [MINUTES] is selected) Touch / to set the time. ≥ It can be set up to a maximum of 60 minutes. ≥ Touch [ENTER]. 4 Touch the thumbnail to be played back. ≥ Next (Previous) thumbnail can be displayed by touching / . Repeat Playback Playback of the first scene starts after playback of the last scene finishes. MENU : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. ≥ All the scenes are played back repeatedly.
Setting the playback speed of FULL HD Slow Motion Video You can set the speed at which this unit will play back parts recorded as FULL HD Slow Motion Video. ≥ Touch the play mode select icon, and select [ALL MP4/iFrame] or [1080/50p] in [MP4/ iFrame]. MENU : [VIDEO SETUP] # [SLOW PLAY SPEED] # desired setting [Super Slow]: Plays back at 1/4 normal speed. [Slow]: Plays back at 1/2 normal speed. ≥ If you play back the parts on another device, they will be played back at 1/2 normal speed.
Advanced (Playback) Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 Touch the date select icon. (l 20) A ALL Date select icon 2 Touch the playback date. 3 Touch the scene or the still picture to be played back. The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
≥ The following scenes and still pictures are grouped separately on the date list, and icons are displayed according to the category: Scene or still picture Scenes recorded with [1080/50p] in [AVCHD] Scenes recorded with [1080/50M]/[1080/28M] in [MP4/iFrame] Scenes saved in MP4 (1920k1080/25p) (l 123)*1 Scenes saved in MP4 (1920k1080/25p) (l 123, 134)*2 Scenes recorded with [720] in [MP4/iFrame] Scenes saved in MP4 (1280k720/25p) (l 123)*3 Scenes saved in MP4 (1280k720/25p) (l 123, 134)*4 Scenes recorded wi
Highlight Playback Part that was recognised as clearly recorded is extracted from multiple scenes, and it can be played back or stored in a short time with effects and music added. It is also possible to create an original Highlight Playback by checking your favourite scenes and setting up to extract those scenes. 1 Touch . (l 20) ALL 2 (When [ALL MP4/iFrame] is selected) Touch the recording format of the scene to be played back.
s WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 Scenes that were converted to MP4 scenes and copied (with the MP4 conversion function) (l 123)*2 s WX970M / VX870M / V770M Scenes that were converted to MP4 scenes and copied (with the MP4 conversion function or recording format conversion function) (l 123, 135)*2 *2 WX970 series/ VX870 series Excluding scenes that were converted from 4K MP4 scenes ∫ Setting up the custom effect It is possible to enjoy the Highlight Playback with your favourite effect b
Playing back with the settings changed Touch [SET] to select the item to change. [SCENE SETUP]*1: Select the scene or date to be played back. [FAVOURITE SCENE SETUP]*2: Set up the favourite scenes. (l 105) [FAVOURITE SCENE PLAY]*2: Set up if the favourite scenes are to be included in the Highlight Playback or not. (l 105) [PRIORITY SETUP]: Select the target to give priority to play back. (l 105) [PLAYBACK TIME]: Select the time to play back.
∫ Checking the favourite scenes 1 2 Touch the scenes to be played back. Touch [Add] and add the favourite part. ≥ Approximately 4 seconds before and after touching [Add] will be added as favourite. ≥ Number of favourite scenes that can be added are 1 to 14. (Number of scenes that can be added differs depending on the scenes selected.) ≥ Favourite check display (A) is displayed in orange, and favourite check display B is displayed on the slide bar.
∫ Playback time setting Touch the playback time. [APPROX 90 SEC.]/[APPROX 3 MIN.]/[AUTO] ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even be played back if the part recognised as clearly recorded is short. ∫ Setting up the title 1 Touch / to select your favourite title sheet. [NONE]/[PICTURE 1]/[PICTURE 2]/[PICTURE 3]/[PICTURE 4] ≥ Title and date will not be displayed when [NONE] is selected. 2 Touch [TITLE].
Saving the Highlight Playback The scenes put together as a Highlight Playback can be saved as a single scene. WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 The recorded scenes can be saved in the SD card. WX970M / VX870M / V770M The recorded scenes can be saved in the built-in memory. 1 2 3 Stop the playback of the Highlight Playback or wait until the Highlight Playback is finished. Touch [SAVE]. Select the format to save.
Manual Edit You can join desired AVCHD scenes, scenes recorded as Backup for Twin Camera or parts of these scenes in the order they were recorded to play back or save as a single scene with music added. ≥ You cannot manually edit the following scenes: j WX970 series/ VX870 series 4K MP4 scene j MP4/iFrame scene 1 Select the menu. MENU 2 : [EDIT SCENE] # [MANUAL EDIT] Touch [1080/50p] or [1080/50i]. ≥ Touch [Enter]. ≥ Thumbnails are displayed by each scene.
≥ WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 When saving a manually edited scene, check the free space on the SD card. WX970M / VX870M / V770M When saving a manually edited scene, check the free space on the built-in memory. Before selecting the scene, check the table below and create sufficient free space for saving it.
4 (To select thumbnails by specifying a range) Touch [Range]. ≥ To cancel the operation, touch it again. 5 (To select thumbnails by specifying a range) Touch the range (start and finish points) you want to play back. ≥ The range between start and finish points are selected, and the indication (white) appears on the thumbnails. ≥ To cancel the selected thumbnails, from among the thumbnails with the indication (white), touch the range (start and finish points) you want to cancel.
∫ To save a manually-edited scene You can save manually edited scenes as a single scene. WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 The recorded scenes can be saved in the SD card. WX970M / VX870M / V770M The recorded scenes can be saved in the built-in memory. 1 2 3 Stop the playback of a manually-edited scene or wait until the playback is finished. Touch [SAVE]. Select the format to save. [AVCHD 1920k1080/50i]: It will be saved in high-definition image quality.
Baby Calendar When a baby’s birthday and name are registered, scenes recorded since the baby’s birthday are displayed as thumbnails for each age in months. ≥ WX970 series/ VX870 series/ V770 series You cannot select scenes recorded as Backup for Twin Camera. ≥ Scenes recorded before the birthday are not displayed. ≥ Scenes with no baby in them are also displayed. ≥ You can register up to 3 babies. 1 Touch . MENU 2 (When registering for the first time) Enter the baby’s birthday.
≥ If you touch the name display, the screen for selecting a registered baby is displayed. From among the 3 registered babies, select the baby you want to display, and touch [ENTER]. If you touch a name with no registered birthday ([Baby 1]/[Baby 2]/[Baby 3]), you can register a new baby. Perform step 2-3. 5 Touch the thumbnail in the centre. ≥ The thumbnails of the scenes recorded in the same age in months are displayed. Touch the desired scene to select the playback operation.
Changing the playback settings and playing back the slide show 1 Touch . (l 20) ALL 2 (Only when you would like to change the settings) Touch [SET] to select the item to change. [DATE SETUP]: Select the date to be played back. [SLIDES INTERVAL]*: Select the interval between still pictures at playback. [EFFECT SETUP]*: Select the effect for playback. [MUSIC SELECT]: Select the music to be played on playback.
(When [MUSIC SELECT] is selected) Touch the desired sound. ≥ Touch [ENTER]. WX970 series/ VX870 series/ V770 series ≥ [USER BGM] lets you use the music stored on your smartphone. To set [USER BGM], use the Wi-Fi function [Remote Ctrl] and create Highlight Playback from the smartphone app “Image App”. The music data will be saved in this unit as [USER BGM]. ≥ Only one track can be saved in this unit as music data for [USER BGM].
Playing back still pictures recorded in Stop Motion Animation Assist Mode as a slide show ≥ For details on recording in Stop Motion Animation Assist Mode, refer to page 64. 1 Touch . ≥ The recording group created most recently in Stop Motion Animation Assist Mode is displayed. ≥ Touching again, returns the display to the normal thumbnail display. 2 MENU Touch a thumbnail to play back the slide show. ≥ The thumbnail display cannot be set to 9 scenes or 20 scenes display.
Advanced (Playback) Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Press the recording/playback button to switch this unit to the Playback Mode. ∫ To delete the scene or still picture being played back Touch while scenes or still pictures to be deleted are being played back.
When you stop deleting halfway: Touch [CANCEL] while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored. To complete editing: Touch [Return]. ≥ You can also delete scenes by touching MENU , selecting [EDIT SCENE] # [DELETE] # [ALL SCENES], [MULTI] or [SINGLE]. ≥ You can also delete still pictures by touching MENU , selecting [PHOTO SETUP] # [DELETE] # [ALL SCENES], [MULTI] or [SINGLE].
Deleting part of a scene (AVCHD/Backup for Twin Camera) WX970 series/ VX870 series/ V770 series Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be deleted. The deleted scenes cannot be restored. ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon. Then, select the AVCHD scene or a scene recorded as Backup for Twin Camera. (l 29) V760 Unnecessary part of an AVCHD scene can be deleted.
Dividing a scene (AVCHD/Backup for Twin Camera) WX970 series/ VX870 series/ V770 series It is possible to divide an AVCHD scene or a scene recorded as Backup for Twin Camera. Any unwanted parts in the scene can be deleted after dividing. ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon. Then select an AVCHD scene or a scene recorded as Backup for Twin Camera. (l 29) V760 It is possible to divide an AVCHD scene.
Dividing a scene to partially delete (4K MP4/MP4/ iFrame) WX970 series/ VX870 series Divide the 4K MP4 scenes or MP4/iFrame scenes, and delete unnecessary parts. V770 series/ V760 Divide the MP4/iFrame scenes, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes deleted by dividing cannot be restored. ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon.
Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Press the recording/playback button to switch this unit to the Playback Mode. 1 Select the menu. MENU : [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT]* * [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected transfer setting device in advance on the computer.
Advanced (Playback) Convert to MP4 WX970 series/ VX870 series/ V770 series You can convert and copy AVCHD scenes, scenes recorded as Backup for Twin Camera, and MP4 scenes. The image quality will be converted into a format that supports playback on a PC and online sharing (MP4 (1280k720/25p) or MP4 (640k360/25p)). V760 You can convert and copy AVCHD scenes and MP4 scenes.
To stop converting to MP4 halfway Touch [CANCEL] during format conversion. To exit the MP4 conversion Touch [Return]. ≥ A scene recorded over a long time may take time. ≥ Scenes recorded in AVCHD exceeding 4 GB (approx.) or 30 minutes (approx.) will be automatically divided when converted to MP4 scenes and copied. ≥ If you convert protected scenes to MP4, their protection will be cleared after the conversion.
Advanced (Playback) Slow speed conversion You can convert the playback speed of parts recorded in FULL HD Slow Motion Video Mode (l 62) to 1/4 normal speed, and copy them. Once converting scenes recorded in FULL HD Slow Motion Video Mode, you can play them back on another device at 1/4 normal speed. ≥ Press the recording/playback button to switch this unit to the Playback Mode. ≥ Touch the play mode select icon, and select [ALL MP4/iFrame] or [1080/50p] in [MP4/ iFrame]. 1 Select the menu.
Advanced (Playback) Relay scene combining [WX970M]/[VX870M]/[V770M] You can combine the relayed scene (l 83) in the built-in memory and the continued scene in the SD card to be one into the SD card. Relay-recorded scene A B C Relay scene combining Built-in memory SD card Range of Relay Recording ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon. Then, select the AVCHD scene.
To cancel relay information MENU : [EDIT SCENE] # [RELAY INFO CANCEL] ≥ When the relay information is cancelled, combining of the relayed scenes will not be possible anymore. Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory. It is recommended to combine the relay scene using the HD Writer AE 5.2. ≥ [RELAY SCENE COMBINE] is not available for scenes recorded as Backup for Twin Camera.
Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A 1 2 High quality HDMI terminal Video terminal ≥ Use the HDMI micro cable (supplied). ≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible highdefinition TV and then play back the recorded high-definition images, you can enjoy them in high resolution with high quality sound.
1 Connect this unit to a TV. A/V A HDMI micro cable (supplied) ≥ Be sure to connect to the HDMI terminal. (Insert the connector with the arrow side facing down.) ≥ Connecting with a HDMI micro cable (l 131) ≥ Listening in 5.1 channel sound (AVCHD) (l 131) ≥ Playback using VIERA Link (l 132) B AV cable (commerciallyavailable) Picture quality 1 WX970 series/ VX870 series To play back images recorded in 4K or high definition picture quality, connect this unit to the HDMI terminal of the TV.
j WX970 series/ VX870 series When [REC FORMAT] is set to [4K MP4], when recording a motion picture in 4K Photo Mode or during PRE-REC j When saving the Highlight Playback scene or a manually edited scene j When copying*1/performing [CONVERT TO MP4]/performing [Slow Speed Conversion] *1 WX970M / VX870M / V770M When copying between the SD card and the built-in memory, this restriction applies only if you convert the recording format ≥ If you connect this unit to the TV when this unit is set to Recording Mode,
Connecting with a HDMI micro cable Select the desired method of HDMI output. WX970 series/ VX870 series MENU : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[2160p]/[1080p]/[1080i]/[576p] V770 series/ V760 MENU : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p] ≥ [AUTO] determines the output resolution automatically based on information from the connected TV.
Advanced (Playback) Playback using VIERA Link What is the VIERA Link (HDAVI Control™)? ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI micro cable (supplied) for automatic linked operations. (Not all operations are possible.) ≥ VIERA Link is a unique Panasonic function built on a HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification.
3 Operate with the remote control for the TV. ≥ You can select the scene or picture you want to play back by pressing the button up, down, left or right, and then the button in the centre. (When selecting scenes) (When playing back) A Display/Cancel operation icons ≥ The following operations are available by pressing the colour buttons on the remote control. Green ≥ Switching the number of scenes/still pictures in thumbnail display (9 thumbnails > 20 thumbnails > 9 thumbnails...
Copy/Dubbing Copying between SD card and Built-in Memory [WX970M]/[VX870M]/[V770M] Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory. ∫ Check the used space of the copy destination It is possible to check the used space of the SD card or built-in memory by [MEDIA STATUS].
≥ When [ ] is selected, the recording format will be converted. If there is no need to convert the recording format, touch [NO]. If there is need to convert the recording format, touch [YES] and select the copying method. [ ]: This will convert the scene recorded in AVCHD on the built-in memory to MP4 (1280k720/25p or 640k360/25p) and copy to the SD card. [ ]: This will convert the scene recorded in MP4 on built-in memory *1 to an MP4 (1280k720/25p or 640k360/25p) scene, and copy it to SD card.
Approximate time for copying When copying a recorded motion picture of full 4 GB size: Approx. 5 minutes to 15 minutes When performing [ ] on a recorded 1080/50p motion picture of full 4 GB size: Approx. 10 minutes to 20 minutes When performing [ ] on a recorded AVCHD (HA) motion picture of full 4 GB size: Approx. 15 minutes to 30 minutes When performing [ ] on a recorded 4K MP4 (2160/25p) motion picture of full 4 GB size*: Approx.
Copy/Dubbing Copying/playing back with a USB HDD ≥ In these Operating Instructions, “USB hard disk drive” is indicated as “USB HDD”. If you connect a USB HDD (commercially-available) to this unit by using a USB Connection Cable (commercially-available), you can copy motion pictures and still pictures recorded on this unit to a USB HDD. It can also play back the scenes and still pictures copied to the USB HDD.
1 (When using a desktop HDD) Connect the AC adaptor (supplied with USB HDD) to the USB HDD. ≥ If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD by USB Connection Cable (commercially-available). 2 Connect the AC adaptor and a sufficiently charged battery to this unit ≥ If the AC adaptor is not connected to this unit, the USB HDD cannot be used. 3 4 Turn on this unit, and press the recording/playback button to switch this unit to the Playback Mode.
∫ Points to check before copying ≥ When using a USB HDD for the first time, or using a USB HDD that has been used with other devices, first run [FORMAT MEDIA]. ≥ Before copying, go to [MEDIA STATUS] to check the amount of free space on the USB HDD. ≥ In the following cases, copying may take longer: j There are lots of scenes j The temperature of this unit is high ≥ If you copy protected scenes or still pictures, the protection setting of the copied scenes or still pictures are cancelled.
Simple copy 1 2 Connect this unit to the USB HDD to prepare for copying. (l 137) Touch [Simple copy]. ≥ When [Copy selected files] or [Playback HDD] is selected, terminate the connection with the USB HDD (l 141), and then perform the operation of Step 1. 3 4 5 WX970M / VX870M / V770M Touch the media you want to copy. Touch [YES]. Touch [EXIT] when the copy complete message is displayed. ≥ The thumbnail view of the copy destination is indicated.
Playing back the USB HDD ≥ Only motion picture/still picture that have been copied by connecting this unit to the USB HDD or copied with HD Writer AE 5.2 can be played back. A B C 1 USB Connection Cable (commercially-available) USB HDD (commercially-available) Turn the side with the symbol up to connect the micro A end of the USB Connection Cable to the USB terminal of this unit. Connect this unit to the USB HDD to prepare for playback.
≥ It is also possible to switch the media to play back by touching the play mode select icon. When the USB HDD is connected, the (USB HDD) can be selected from the displayed media types. (l 29) ≥ WX970 series/ VX870 series/ V770 series Scenes recorded as Backup for Twin Camera will be saved as normal AVCHD scenes when copied to the USB HDD. ≥ WX970 / WX979 / VX870 / VX878 / V770 / V777 / V760 The scenes you have saved in Highlight Playback during playback of the USB HDD are saved in the SD card.
Copy/Dubbing Dubbing with a Blu-ray disc recorder, video device, etc. ∫ Check before dubbing Check the equipment used for dubbing.
Dubbing in high-definition picture quality ∫ To dub using equipment with an SD card slot You can dub by directly inserting an SD card. ≥ WX970M / VX870M / V770M To copy scenes or still pictures from the built-in memory to an SD card, see page 134. ∫ To dub using equipment with a USB terminal You can dub by connecting a USB cable. ≥ Use the AC adaptor to free you from worrying about the battery running down. ≥ Turn on the unit.
4 Dubbing through operations on the Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder. ≥ WX970M / VX870M / V770M Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing. About the screen indication of the unit ≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on.
Dubbing in standard picture quality ∫ Dubbing using equipment without an SD card slot or a USB terminal, or using a video device You can dub by connecting an AV cable (commercially-available). ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. ≥ The channel set will differ depending on the terminal to which the unit is connected. ≥ See the operating instructions of the video device for details.
Copy/Dubbing Using the Eye-Fi™ card By using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on the card, and save them on a PC or upload them on a file-sharing website via a wireless network. ≥ The functions of the Eye-Fi card (including wireless transmission) are not guaranteed to work on this product. In the case of a malfunction of the card, please contact the card manufacturer.
∫ Using Eye-Fi direct mode The files can be transferred directly from the Eye-Fi card to a smartphone without going through the wireless access point when necessary setting is performed in a PC in advance. ≥ Install the software supplied with the Eye-Fi card on your PC, and configure the EyeFi direct mode settings. ≥ Insert an Eye-Fi card (commercially available) to the unit. Select the menu. MENU : [SETUP] # [Eye-Fi DIRECT] ≥ This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].
≥ The Eye-Fi menu only appears when an Eye-Fi card is used. ≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to changes to the card specification etc. ≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with the EyeFi card before use. ≥ When the endless memory function of the Eye-Fi card is set to on, the files transferred from the card may be deleted automatically.
Wi-Fi [WX970] series/[VX870] series/[V770] series Wi-Fi® function ∫ Use this unit as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using this unit for any purpose other than as a wireless LAN device.
∫ This unit is WPS-compatible WPS (Wi-Fi Protected Setup™) is a function that allows you to easily set up a connection with a wireless LAN device and make security-related settings. ≥ This unit cannot be used to connect to a public wireless LAN connection. ≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point. ≥ This unit uses the 2.4 GHz frequency band. You cannot establish a wireless LAN connection using the 5 GHz frequency band.
Wi-Fi [WX970] series/[VX870] series/[V770] series [Remote Ctrl] Using a smartphone, you can perform record/playback operations from a remote location or upload motion pictures and still pictures recorded in this unit on SNS (Social Networking Service). Image App Image App A B When connecting directly to a smartphone When connecting to a wireless access point ≥ You need to turn on the Wi-Fi function of your smartphone. ≥ Do not remove the SD card during remote operations.
Setting up a direct Wi-Fi connection between this unit and a smartphone Using NFC, you can easily set up a direct connection between this unit and the smartphone. ∫ If the device is Android (NFC-compatible) Use NFC to set up a direct connection between this unit and the smartphone. ≥ Proceed to “Using [Remote Ctrl] with a direct connection”. (l 154) ∫ If the device is Android (non-NFC-compatible) or iOS Operate this unit and the smartphone to set up a direct connection.
Using [Remote Ctrl] with a direct connection ∫ If the device is Android (NFC-compatible) ≥ Set the NFC function of the smartphone to ON. 1 2 Start up the smartphone application “Image App”. Touch the smartphone on of this unit. ≥ Touch the NFC touch area while the NFC mark is displayed on the smartphone screen. ≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this unit, and then touch the smartphone on of this unit again.
≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten, smartphone information with the oldest registration date and time will be deleted. j Touching an NFC-compatible smartphone on this unit. j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone directly. ≥ Please refer the instructions for the device you are using for information on how to set up and use a NFC-compatible smartphone.
∫ If the device is Android (non-NFC-compatible) or iOS 1 2 Connect the smartphone to a wireless access point. Press Wi-Fi button on this unit and touch [Remote Ctrl]. ≥ It will go into connection standby for remote operation. 3 Start up the smartphone application “Image App”. ≥ When the connection is complete, images of this unit is displayed on the smartphone screen. To exit [Remote Ctrl]: Touch [EXIT] or press Wi-Fi button. ≥ The message is displayed. Touch [YES] to close the indication.
Playback screen AVCHD_0001 2015/12/15 15:30:50 XXXXXXXXX 1/16 1 2 3 4 5 6 7 8 Camera function button Number of scenes Remaining battery power of this unit Delete Upload Copy Name of the connected device Scene information display ≥ Depending on your OS or the version of the smartphone application “Image App”, the screens may differ from the ones above.
∫ In Playback Mode ≥ Playback ≥ Selecting a media to playback (SD card/Built-in memory)*4 ≥ Switching between thumbnails (AVCHD/4K MP4*1, 2/MP4/Backup (Backup for Twin Camera)/ JPEG (Still picture)) ≥ Delete ≥ Save (Copy) j Scenes recorded in AVCHD cannot be copied. j Scenes recorded in iFrame can only be copied with iOS devices. j Depending on your smartphone, scenes recorded in MP4 format may not be copied.
Wi-Fi [WX970] series/[VX870] series/[V770] series [Baby Monitor] You can use your smartphone to check on your baby being monitored by this unit when you are in another room. The smartphone and this unit can be used like radio transceivers, allowing the users to have a conversation by taking turns. This unit can also send a notification to the smartphone whenever the baby cries. Image App XXXXXXXXX ≥ You need to turn on the Wi-Fi function of your smartphone.
Using [Baby Monitor] 1 Press Wi-Fi button on this unit and touch [Baby Monitor]. ≥ The SSID of the wireless access point to which this unit is connected is displayed. 2 Connect the smartphone to a wireless access point. ≥ To connect it, select the SSID of the wireless access point displayed on the screen of this unit. 3 Start up the smartphone application “Image App”.
Changing [Baby Monitor] settings Touch [Setup] on the screen of this unit, and select the item you want to set. ∫ [Notification Setup] This sets whether to send a notification to the smartphone when a sound is detected. [ON]/[OFF] ∫ [Notification Test] This tests if a notification can be sent to the smartphone when a sound is detected. ∫ [Remote Voice Level] This sets the voice message volume. (Volume high)/ (Volume low) ∫ [Sound Detection Sensitivity] This sets the sound detection sensitivity.
Wi-Fi [WX970] series/[VX870] series/[V770] series [Hom.Monitor] You can confirm the recording screen of this unit from outside using a smartphone. Image App XXXXXXXXX ≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network such as 3G. ≥ If [CLOCK SET] (l 21) is not set correctly, [Hom.Monitor] cannot be used.
Using [Hom.Monitor] ≥ Perform the home monitoring operation on the smartphone. (l 167) ≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the network settings. When using the home monitor function for the first time ∫ If the device is Android (NFC-compatible) ≥ Set the NFC function of the smartphone to ON. 1 2 Turn off the Wi-Fi setting of the smartphone. Start up the smartphone application “Image App”.
5 6 Select [Set connect. dest.] of the smartphone. Enter the Device ID and Password displayed on the screen of this unit into the smartphone. ≥ When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS device). ≥ If you want to check the Device ID and Password after performing Step 7, on the screen of this unit, touch [Setup] # [Home Monitor Connect]. 7 Touch [ENTER] on the screen of this unit ≥ Check that the message “Connecting...” has disappeared from this unit.
When using the home monitor function for the second time or later ∫ If the device is Android (NFC-compatible) ≥ Set the NFC function of the smartphone to ON. 1 Start up the smartphone application “Image App”. ≥ When a Wi-Fi connection guidance screen is displayed, select [NO]. 2 3 Display the screen of a connection setup to home monitor from the menu of a smartphone. Touch the smartphone on of this unit.
Line quality The image and sound may be interrupted or the connection may be terminated depending on your line conditions. Use the recommended optimal speed (upstream) below as a guide to make necessary settings. ∫ Recommended optimal speed (upstream) for the broadband line, mobile router (tethering), etc. connected to this unit ≥ For information on the optimal speed, contact your service provider, etc.
What you can operate/set with a smartphone during home monitoring Refer to [Help] in the “Image App” menu about how to operate. ∫ What you can operate with a smartphone Confirm the condition inside the house The monitoring video can be confirmed. ≥ The monitoring image can be recorded as a video or a still picture. ≥ It cannot be confirmed with multiple smartphones simultaneously. ≥ Depending upon the environment in which the device is used, motion picture may be like a frame rate is low.
Changing the home monitor settings of this unit ≥ Setting cannot be performed while operating monitoring with a smartphone. Touch [Setup] and select desired setting. ∫ [Home Monitor Connect] You can display the registration screen for a Device ID and Password. ≥ If [QR code] is touched, a QR code will be displayed on the screen of this unit. ∫ [Remote Voice Level] You can set the initial remote voice level and speaker volume level of the remote voice function.
Wi-Fi [WX970] series/[VX870] series/[V770] series [DLNA Play] Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures on the TV. A DLNA-compatible TV ≥ Please read the operating instructions for the TV about connecting TV to the wireless access point. ≥ Do not remove the SD card in playing back on a TV. Preparations before using [DLNA Play] 1 2 3 Check if the wireless access point is compatible with IEEE802.11b/g/n. Check if the TV is DLNA-compatible.
Playing back on a TV You can play back the scenes and still pictures recorded with or stored in this unit on a TV. ≥ The following scenes can be played back: j Scenes recorded in AVCHD j Scenes recorded as Backup for Twin Camera j Scenes recorded in MP4/iFrame [720] j Scenes saved in MP4 (1280k720/25p) or MP4 (640k360/25p) 1 Press Wi-Fi button on this unit and touch [DLNA Play]. ≥ If you touch [Change AP], you can switch the wireless access point to another one that has been registered to this unit.
Wi-Fi [WX970] series/[VX870] series/[V770] series [Copy] By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still pictures recorded with this unit to the PC. A PC ≥ For information on the connection between a PC and a wireless access point, refer to the operating instruction of the device in use. ≥ If this unit and a PC are not connected to the same wireless access point, copying is not possible.
Creating a shared folder (destination folder) on the PC To copy scenes and still pictures by setting up a Wi-Fi connection between this unit and the PC, complete the following preparations: j Turn on the PC j Create a shared folder (destination folder)*1 *1 The name of the folder must consist of 15 or less alphanumeric characters. ∫ When using HD Writer AE 5.2 1 Install HD Writer AE 5.2.
Copying to a PC ≥ Create a shared folder (destination folder) on the PC. (l 172) 1 2 Press Wi-Fi button on this unit and touch [Copy]. Touch the PC to be connected. ≥ To search for PCs again, touch [Refresh]. (When the PC you want to connect to is not displayed) 3 Touch [Set Manually]. (When [Set Manually] is touched) Enter the computer name of the PC (NetBIOS name for Mac computers). ≥ Enter the computer name of your PC (NetBIOS name for Mac computers). (A maximum of 15 characters can be entered.
If you intend to delete the original scenes or still pictures when the copying has finished, always play back the duplicate scenes or still pictures on PC before deletion to confirm that they have been copied normally. ≥ Copying can be performed even when the battery is used for power, but we recommend that the AC adaptor be used. ≥ Once scenes or still pictures are copied to a PC, the original scenes or still pictures cannot be copied to any PCs.
Wi-Fi [WX970] series/[VX870] series/[V770] series [Live Cast] You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” and USTREAM. USTREAM A You can also broadcast motion pictures live by connecting this unit and a smartphone that supports tethering. ≥ If [CLOCK SET] (l 21) is not set correctly, [Live Cast] cannot be used.
Preparations before using [Live Cast] 1 (When connecting to a wireless access point) Check if the wireless access point is compatible with IEEE802.11b/g/n. (For tethering connection) Check if your smartphone is compatible with the tethering function. ≥ For information on how to set up the tethering function, refer to the operating instructions for your smartphone. 2 Acquire a USTREAM ID/Password/Programme. ≥ Acquire a USTREAM ID/Password/Programme using a smartphone or a PC.
Broadcasting live Press Wi-Fi button on this unit and touch [Live Cast]. ≥ If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them according to the screen. ≥ You can register up to three wireless access points. When connecting to a wireless access point, this unit will try to connect to wireless access points one after the other. For example, if it fails to connect to the first one, it will try to connect to the second one.
∫ About the screen indications in the Live Cast Mode / Live broadcast indication Line quality (l 179) 1h23m Elapsed time of the live broadcast 10fps Frame rate (l 179) Number of people watching the live broadcast ≥ Up to 9999 viewers can be indicated. The indication does not appear when the number is 0. E-mail delivery setting Live broadcast microphone setting (l 180) ≥ The indication appears when [Microphone On Air] is set to [OFF]. ≥ Recording is performed in Intelligent Auto Mode.
∫ To configure the e-mail delivery settings You can make the delivery setting of a broadcast notification e-mail and the setting for the scheduled time and date of the broadcast indicated in the e-mail. 1 2 3 Touch [Send E-mail]. Touch [ON] or [OFF]. [ON]: Enables e-mailing. [OFF]: Disables e-mailing. (When [ON] is selected) To set the scheduled broadcast date. [Set to Sending E-mail Time]: Allows you to set the date on which is touched.
≥ If the line for the smartphone is switched, communication may be interrupted. In that case, connect again. ∫ To save in USTREAM 1 2 Touch [Save in USTREAM]. Touch [ON] or [OFF]. [ON]: Live motion pictures are saved on USTREAM. [OFF]: Select this option not to save on USTREAM. ∫ To set the image quality of a motion picture you simultaneously broadcast and record 1 2 Touch [REC MODE]. Touch desired recording mode.
Wi-Fi [WX970] series/[VX870] series/[V770] series Install the “Image App” ≥ To use the following Wi-Fi functions, you need to install the smartphone application “Image App”. j [TWIN CAMERA] (l 199) j [Remote Ctrl] (l 152) j [Baby Monitor] (l 159) j [Hom.Monitor] (l 162) About the “Image App” The “Image App” is an application provided by Panasonic. For Android apps For iOS apps OS Android 2.3.3 or later* iOS 6.0 or later* (iPhone 3GS is not supported.
Wi-Fi [WX970] series/[VX870] series/[V770] series Setting Up a Wi-Fi Connection To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi. ≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ. Wi-Fi connection methods Available Wi-Fi functions Connecting to a wireless access point (l 185) ≥ ≥ ≥ ≥ ≥ ≥ [Remote Ctrl] (l 155) [Baby Monitor] (l 159) [Hom.
Using the [Wi-Fi Setup Wizard] to set up a connection With the smartphone application “Image App”, you can transfer the following information between the smartphone and this unit by using the NFC or QR code function. ≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON]. (l 194) (The default setting is [OFF].
Connecting with Android (non-NFC-compatible) or iOS device 1 2 3 4 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Wi-Fi Setup Wizard]. Touch [YES]. Touch [QR code] or [Wi-Fi]. When [QR code] is selected 1 Start up the smartphone application “Image App”. 2 On the smartphone, select [QR code], and scan the QR code displayed on the screen of this unit. ≥ The setup screen is displayed on the smartphone.
Connecting to a wireless access point Check if the wireless access point you are using is compatible with WPS j If the wireless access point is compatible with WPS: Proceed to the following [Easy Connection (WPS)] j If the wireless access point is not compatible with WPS: “Searching for wireless access points to set up a connection” (l 186) [Easy Connection (WPS)] 1 2 3 4 Press Wi-Fi button on this unit. Touch [Wi-Fi Setup]. Touch [Set Wireless Access Point].
Enter a PIN code to set the Wi-Fi connection 1 Touch [PIN code] in Step 6. 2 Touch the wireless access point to be connected. ≥ If you touch [Refresh], you can search for wireless access points again. ≥ If you touch and select a wireless access point, all characters will be displayed. In this case, touch [OK]. 3 Enter the PIN code displayed on this unit screen into the wireless access point. ≥ For further details, please read the operating instructions for the wireless access point.
7 (When there is an Encryption key (Password)) Enter the Password. ≥ For details on how to enter characters, refer to page 106. ≥ When the entry is complete, touch [Enter]. ≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set Wireless Access Point].
9 (When selecting [WEP]/[TKIP]/[AES]) Touch [INPUT], then enter the Password. ≥ For details on how to enter characters, refer to page 106. ≥ When the entry is complete, touch [Enter]. ≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set Wireless Access Point].
[Easy Connection (WPS)] 1 2 3 4 5 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. Touch [Change connection type]. Touch [Easy Connection (WPS)]. Set the smartphone to WPS Mode. Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen Connecting with QR code 1 2 3 4 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. Touch [Change connection type]. Touch [QR code].
Connecting by entering an SSID and Password 1 2 3 4 Press Wi-Fi button and touch [Wi-Fi Setup]. Touch [Direct Connection]. Select the SSID displayed on this unit from the Wi-Fi setup menu. Enter the Password displayed on this unit’s screen on the smartphone. Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen ≥ Transmission speed may decrease, or may not be usable depending on the environment it is used in.
If the Wi-Fi connection cannot be established ≥ Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone. Problem It cannot connect to the wireless access point. The wireless access point is not detected. Check points (General) ≥ Turn ON the wireless access point. ≥ Approach the wireless access point and reconnect. ≥ If it takes time to complete the connection, the Wi-Fi connection will be aborted. Reset the connection settings.
Problem Check points The Wi-Fi connection is not possible between this unit and a smartphone. (Wireless Access Point Connection) ≥ Make sure the smartphone is properly connected to the wireless access point by checking the Wi-Fi settings of the smartphone. ≥ Make sure this unit and the smartphone are connected to the same wireless access point. ≥ Make sure the wireless access point is registered in this unit.
Wi-Fi [WX970] series/[VX870] series/[V770] series How to Use the [Wi-Fi Setup] Menu Configure various settings necessary to use the Wi-Fi function. When connected to Wi-Fi, the settings cannot be changed. 1 2 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch desired menu item. [Set Wireless Access Point] You can add or delete wireless access points, or rearrange the display order of wireless access points. ≥ Up to 3 wireless access points can be set.
[Direct Connection Password] [ON]/[OFF] This setting controls whether or not a password is required when you directly connect this unit and a smartphone to start remote operations or to use the Wireless Twin Camera function. ≥ If you select [OFF], you can directly connect this unit and a smartphone without entering the password for this unit’s SSID into the smartphone. ≥ If you select [OFF], you cannot set up a connection with [Easy Connection (WPS)] or [QR code].
[Wi-Fi Password] [Setup]/[Delete] This will set/clear the Password to limit the startup of the Wi-Fi setting menu. By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi function by third party, and protect the set personal information. 1 2 Touch [Setup]. Touch [INPUT], and enter the Password (6 characters). ≥ After finish entering the Password, touch [Enter]. ≥ If the Password has already been set, is displayed.
[Wireless LAN setup] You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet Mask] and [MAC Address]. [IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address] ≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL], you can set each item. Select the item you want to set, and set it. ≥ [MAC Address] cannot be changed.
Using the “LUMIX CLUB” Acquire a “LUMIX CLUB” Login ID (free). You can upload the scenes and still pictures recorded with this unit to WEB service with [Remote Ctrl] or use the [Live Cast] function if you register to “LUMIX CLUB”. ≥ You can set the same “LUMIX CLUB” Login ID for this unit and a smartphone. When Login ID is acquired over the smartphone (“Image App”) only, it is possible to register the same Login ID to this unit using the “Image App”.
∫ Register the Login ID of the smartphone (“Image App”) into this unit It is convenient to match the Login IDs for this unit and the smartphone (“Image App”) when using the Wi-Fi function utilising the “LUMIX CLUB”. 1 2 Connect this unit to the smartphone. From the “Image App” menu, set the common Login ID. ∫ Check the “LUMIX CLUB” terms of use Check the details if the terms of use have been updated. 1 2 3 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [LUMIX CLUB].
Wireless Twin Camera [WX970] series/[VX870] series/[V770] series Wireless Twin Camera function When this unit and a smartphone are connected via Wi-Fi, you can display the image transmitted from the smartphone on this unit’s Sub Window and record it simultaneously with the Main Camera’s image.
Notes on the Wireless Twin Camera function The performance of the Wireless Twin Camera function varies depending on the surrounding radio wave conditions. Since the human body blocks radio waves, it is also influenced by how crowded the area is. ∫ Recording tips ≥ Use your Wireless Sub Camera in a position where as much of it as possible can be seen from the position of this unit. ≥ When the signal between this unit and the Wireless Sub Camera weakens, a warning icon appears.
Wireless Twin Camera [WX970] series/[VX870] series/[V770] series Using a Smartphone as a Wireless Sub Camera ≥ You need to turn on the Wi-Fi function of your smartphone. ≥ Exit the Twin Camera function. (l 48) ≥ WX970 series/ VX870 series Set [REC FORMAT] to [AVCHD] or [MP4/iFrame]. Preparations before using the Wireless Twin Camera function 1 2 Install the smartphone application “Image App” on your smartphone.
When connecting a smartphone to this unit as a Wireless Sub Camera for the first time If the device is Android (NFC-compatible) ∫ Using NFC to set up a connection ≥ Set the NFC function of the smartphone to on. 1 (When using the Wi-Fi Setup menu) Press Wi-Fi button on this unit and touch [TWIN CAMERA]. 1/2 A B [TWIN CAMERA] [EXIT] (When using the recording screen) Touch the recording screen on this unit and touch . ≥ Check that the screen for selecting the device to be connected is displayed.
If the device is Android (non-NFC-compatible) or iOS ≥ The QR code is not displayed when [Direct Connection Password] (l 194) is set to [OFF]. Refer to “Selecting this unit’s SSID and entering a password on the smartphone to set up a connection” ≥ The default setting for [Direct Connection Password] is [OFF]. ∫ Selecting this unit’s SSID and entering a password on the smartphone to set up a connection 1 (When using the Wi-Fi Setup menu) Press Wi-Fi button on this unit and touch [TWIN CAMERA].
(When [Direct Connection Password] is set to [ON]) Touch [Wi-Fi] on the screen of this unit, and on the smartphone, set the SSID displayed on the screen of this unit. ≥ When using an Android device, perform the following operations: 1 Start up the smartphone application “Image App”. 2 On the smartphone, select [Wi-Fi], and select the SSID displayed on this unit. 3 Enter the Password displayed on this unit.
5 On the smartphone, select [QR code] to scan the QR code displayed on the screen of this unit. ≥ When using an iOS device, perform the following operations: 1 Select the option that allows you to install the app on the profile screen of the “Image App”, and follow the on-screen instructions to complete the installation. 2 Press the home button to close the displayed screen. 3 Touch [NEXT] on the screen of this unit to display its SSID.
Wireless Twin Camera [WX970] series/[VX870] series/[V770] series Recording with a Wireless Sub Camera (Wireless Twin Camera) ≥ The Sub Camera of this unit will be disabled. ≥ An image recorded with the Main Camera and the Wireless Sub Camera’s image displayed on the Sub Window are recorded as a single scene or still picture. When you play back such a scene or still picture, it is not possible to delete only the Sub Window image or hide it.
∫ Displaying or hiding the Sub Window Touch . ≥ Each time you touch the icon, you can display or hide the Sub Window. ≥ When the Sub Window is hidden, the image of the smartphone will not be recorded. ∫ Sub Window size when using a Wireless Twin Camera The size of the image displayed on the Sub Window varies depending on the smartphone camera and the orientation of the smartphone.
1 : Pink 2 : Green 3 : Orange 4 : Grey 5 : Drop shadow* 6 : No frame * This adds a drop shadow on the right and bottom sides. A [FRAMING] ≥ It takes some time until the Sub Window appears. ≥ You cannot set this unit to Playback Mode when it is connected to a Wireless Sub Camera. ≥ Simultaneous recording of still pictures is not possible while recording a motion picture or using PRE-REC with the Wireless Twin Camera function.
≥ When you record still pictures by using the Wireless Twin Camera function, it may take longer than usual to achieve focus. (l 27) ≥ The Fade function’s image effects do not affect the Sub Window. ≥ When no image is transmitted to the Sub Window continuously for approximately 4 minutes or longer, the Wi-Fi connection will be terminated. ≥ When the “Image App” screen disappears, image transmission to the Sub Window stops. (The Wi-Fi connection stays connected.
Wireless Twin Camera [WX970] series/[VX870] series/[V770] series If the Wi-Fi connection cannot be established (Wireless Twin Camera) ≥ For information on the setup of your smartphone, refer to its operating instructions. Problem Cannot connect this unit to the smartphone. No image on the Sub Window. The Sub Window image is interrupted. The Sub Window image disappears. Check points ≥ Make sure the smartphone is properly connected to this unit by checking the Wi-Fi settings of the smartphone.
With a PC What you can do with a PC HD Writer AE 5.2 You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, DVD discs or SD cards using HD Writer AE 5.2. Check the website below to download/install the software. ≥ The software is available for download until the end of March 2018. http://panasonic.jp/support/global/cs/soft/download/f_ae52.html ≥ Refer to the operating instructions of HD Writer AE 5.2 (PDF file) for details on how to use it.
What can be done with the HD Writer AE 5.2 Data type Online sharing: You can upload motion pictures on the Internet and share them with your family and friends. Motion picture Playing back on a PC: Play back the motion picture data in high-definition picture quality on a PC. Motion picture and still picture Formatting discs: Depending on the type of disc that you use, formatting is necessary.
Before Installing HD Writer AE 5.2 Your installation or use of the Software defined below shall be conclusively deemed to constitute your acceptance of the terms of this Agreement. If you do not accept the terms of this Agreement, do not install, nor use the Software. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5 produced by Microsoft Corporation (1) Licensee shall use the MICROSOFT SQL SERVER COMPACT 3.5 only when included in the Software, and shall not use the MICROSOFT SQL SERVER COMPACT 3.5 in any other configuration or method. Licensee shall not publish the MICROSOFT SQL SERVER COMPACT 3.5 or work around any technical limitations in the MICROSOFT SQL SERVER COMPACT 3.5.
With a PC Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ WX970 series/ VX870 series Even if the system requirements are fulfilled, it may take some time to edit 4K motion pictures and it may not be possible to play them back smoothly. ≥ A compatible Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/ DVD. ≥ Operation is not guaranteed in the following cases.
Display High Colour (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1920k1080 pixels or more recommended) DirectX 9.0c compatible video card (DirectX 10 recommended) Compatible with DirectDraw overlay PCI Express™k16 compatible recommended Video memory of 256 MB or more recommended WX970 series/ VX870 series ≥ A video card compatible with hardware decoding of 4K motion pictures is required when using playback function for 4K motion pictures.
∫ To use the HD Writer AE 5.2 You will need a high performance PC depending on the functions to be used. It may not properly play back or properly operate depending on the environment of the PC used. Refer to the operating environment and notes. ≥ Operation during the playback may become slow if the CPU or memory is not fulfilling the requirements of the operating environment. ≥ Always use the most current driver for the video card. ≥ Always make sure there is enough capacity on the HDD in the PC.
With a PC Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorisation. (If you do not have authorisation to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed. ≥ Explanation of operations is based on Windows 7. ∫ Installing HD Writer AE 5.
With a PC Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. USB cable (supplied) Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB terminal of this unit. ≥ Insert the plugs as far as they will go. A B 1 Connect this unit to the AC adaptor. ≥ Use the AC adaptor to free you from worrying about the battery running down. 2 3 Turn on the unit. Connect this unit to a PC. ≥ The USB function selection screen will appear.
∫ To disconnect USB cable safely WX970 series Select the icon in task tray displayed on the PC, and then click [HC-WX970], [HC-WX979] or [HC-WX970M]. VX870 series Select the icon in task tray displayed on the PC, and then click [HC-VX870], [HC-VX878] or [HC-VX870M]. V770 series Select the icon in task tray displayed on the PC, and then click [HC-V770], [HC-V777] or [HC-V770M]. V760 Select the icon in task tray displayed on the PC, and then click [HC-V760].
About the PC display When the unit is connected to a PC, it is recognised as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. We recommend using HD Writer AE 5.2 to copy motion picture data. Using Windows Explorer or other programmes on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 5.2. It is impossible to write data to the built-in memory or SD card on this unit from a PC.
∫ Copying your still pictures to your PC Card reader function (mass storage) Still pictures recorded with this unit can be copied to the PC with Explorer or other programmes. 1 Double-click the folder that contains the still pictures. ([DCIM] # [100CDPFQ] etc.) 2 Drag and drop the still pictures onto the destination folder (on the PC’s HDD). ≥ Do not delete the SD card’s folders. Doing so may make the SD card unusable in this unit. ≥ Do not delete or edit files on the SD card or USB HDD on the PC.
With a PC Starting HD Writer AE 5.2 ≥ To use the software, log on as an Administrator or as user name for standard user account. The software cannot be used with the user name for a guest account. (On the PC) Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 5.2] # [HD Writer AE 5.2]. ≥ For details on how to use the software applications, read the PDF operating instructions of the software.
With a PC If using Mac (mass storage) ≥ HD Writer AE 5.2 is not available for Mac. ≥ iMovie and Final Cut Pro X supported. For details about iMovie and Final Cut Pro X, please contact Apple Inc. ∫ Operating environment PC Mac OS OS X v10.9 CPU Intel Core 2 Duo or better RAM 2 GB or more Interface USB port Other requirements Mouse or equivalent pointing device ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used.
Others Indications WX970 series VX870 series V770 series WX970M / VX870M / V770M *1 *2 *3 *4 ∫ Recording indications Motion Picture Recording Mode 0h00m00s Still Picture Recording Mode 1h30m R 1h20m PRE-REC 1h30m R 3000 2.
R3000 Remaining number of still pictures (l 28) / WX970 series/ VX870 series 25.9M / 14M / 2.1M / 20.4M / 10.9M / 0.3M / 20M / 10.6M / 2M AF/AE tracking (l 73) / MF Manual Focus (l 68) / / / / White Balance (l 66) Number of recording pixels for still pictures (l 28, 92, 97) In Playback Mode, the picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
Auto Focus Single (l 51)*1 Relay-recorded scene (l 83)*4 Recording mode switching icon (l 18) / 15. 11.
∫ Confirmatory indications –– (Time display) The built-in battery is low. (l 21) Warning for recording of yourself (l 22) SD card is not inserted or is incompatible.
Others Messages Major confirmation/error messages to be indicated on the screen in text. *1 WX970M / VX870M / V770M only *2 WX970 series/ VX870 series/ V770 series only PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*1 We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. (l 211) This message does not indicate that there is a problem with this unit. CHECK CARD.
About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) ≥ is displayed when abnormal management information is detected when the scenes are displayed in thumbnail. ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ Use a sufficiently charged battery or the AC adaptor. Depending on the condition of the data, it may not be possible to completely repair the data.
Others Troubleshooting ∫ It is not a malfunction in following cases A clicking sound is heard when the unit is shaken. ≥ This is the sound of the lens moving and is not a defect. This sound will no longer be heard when the unit is turned on and set this unit to the Motion Picture Recording Mode or Still Picture Recording Mode. Object seems to be warped. ≥ Object seems to be warped slightly when the object moves across the image very fast, but this is because the unit is using MOS for the image sensor.
Indication Problem Remaining battery indication is not displayed properly. Check points ≥ The remaining battery capacity indication is an approximation. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. Recording Problem Check points The unit arbitrarily stops recording. ≥ Use an SD card that can be used for motion picture recording.
Playback Problem Check points Scenes cannot be deleted. ≥ Release the protect setting. (l 122) ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data. (l 40) Please be aware that if a media is formatted then all the data recorded on the media is erased and cannot be recovered. Back up important data on a PC, disc etc.
With a PC Problem Check points When connected by the USB cable, this unit is not detected by the PC. ≥ After re-inserting the SD card into the unit, reconnect the supplied USB cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 215, 224) ≥ Connect the supplied USB cable again after restarting the PC and turning on this unit again. When the USB cable is disconnected, an error message will appear on the PC.
About the Wi-Fi function [WX970] series/[VX870] series/[V770] series Problem Check points The live broadcast screen will not be displayed. ≥ Make sure the “LUMIX CLUB” Login ID and Password have been input correctly. ≥ Use a PC or smartphone to make sure the USTREAM account registration is complete. ≥ Use a PC or smartphone to register and set up USTREAM from a “LUMIX CLUB” linked service. (l 176) ≥ “LUMIX CLUB” or USTREAM lines may be congested. Retry the live broadcast after waiting a short while.
∫ If AVCHD scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable.
Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. ≥ Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. WX970M / VX870M / V770M When disposing of or giving away this unit, note that: ≥ Formatting and deletion simply change the file management information and cannot be used to completely erase the data in built-in memory of this unit. The data can be recovered using commercially available software or the like.
If you drop the battery accidentally, check to see if the terminals are damaged. ≥ Inserting a battery with damaged terminals can damage the unit. Do not throw an old battery into fire. ≥ Heating a battery or throwing it into a fire may result in an explosion. If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery.
About the SD card LCD monitor When disposing of or giving away the SD card, note that: ≥ Formatting and deletion of data on this unit or computer only changes the file management information and does not completely delete the data in the SD card. ≥ It is recommended that the SD card is physically destroyed or the SD card is physically formatted using this unit when disposing of or giving away the SD card.
About personal information When a name or birthday is set by Baby Calendar, personal information will be included in this unit. WX970 series/ VX870 series/ V770 series When the Wi-Fi function is used, the SSID, Password, and other personal information will be included in this unit. Setting a Wi-Fi password is recommended to protect personal information.
Others About copyright ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation.
Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording.
≥ Use time in the row of 4 GB in above table as a guideline for the time that can be copied onto one DVD disc (4.7 GB). ≥ WX970 series/ VX870 series/ V770 series Recordable times will be approximately half the times in the above table when Backup for Twin Camera is in operation.
Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. WX970 series/ VX870 series (Still picture recording mode) 25.9M 6784k3816 Picture size Aspect ratio SD card Built-in memory* 16:9 250 450 3200 16 GB 1000 1900 12500 64 GB 4300 7500 52000 16 GB 1000 1900 12500 20.4M 5216k3912 Aspect ratio Built-in memory* 0.
V770 series/ V760 24M 6528k3672 Picture size Aspect ratio SD card * Built-in memory 16:9 250 500 3200 16 GB 1100 2100 12500 64 GB 4700 8500 52000 16 GB 1100 2100 12500 18M 4896k3672 Aspect ratio Built-in memory* 0.3M 640k480 4:3 350 750 28000 16 GB 1500 3100 117000 64 GB 6000 12500 475000 16 GB 1500 3100 117000 20M 5472k3648 Aspect ratio Built-in memory* 8M 3264k2448 4 GB Picture size SD card 2.1M 1920k1080 4 GB Picture size SD card 12.6M 4736k2664 10.
Others Optional accessories Some optional accessories may not be available in some countries. Attaching the Conversion Lens/ Filter Kit Attaching the supplied shoe adaptor Attach the Wide Conversion Lens (VW-W4907H: optional) ND filter or MC protector of the Filter Kit (VW-LF49N: optional) in front of the lens. ≥ You will not be able to use the video light. Set the video light setting to ([OFF]) and the [AF ASSIST LAMP] setting to [OFF].
About the Remote Pan Tilt Cradle If you connect this unit to the Remote Pan Tilt Cradle VW-CTR1 (optional) by USB cable, this unit can automatically track the movement of the subject being recorded. This unit zooms in/out the image automatically, and the Remote Pan Tilt Cradle pans and tilts this unit. WX970 series, VX870 series, V770 series Using Wi-Fi functions in combination with the Remote Pan Tilt Cradle The Remote Pan Tilt Cradle can also be used by the following Wi-Fi functions.
5 Touch [Remote Pan Tilt Cradle]. ≥ The Remote Pan Tilt Cradle Mode selection screen is displayed. ≥ If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle is not recognised correctly, reconnect the USB cable. ≥ If you turn off and on this unit with the USB cable connected, this unit may operate in the previous Remote Pan Tilt Cradle Mode. 6 Install the Remote Pan Tilt Cradle so that its home position will face the front of the subject.
Using the Remote Pan Tilt Cradle ≥ Connecting the Remote Pan Tilt Cradle to this unit. (l 248) ≥ Set [Panning Angle]/[Tilt Angle]/[Tilt Speed] in advance. (l 254) 1 Touch the desired Remote Pan Tilt Cradle Mode. Operation of the Remote Pan Tilt Cradle Mode [Party Scene] The operation is automatic. ≥ The Remote Pan Tilt Cradle works within the recording range set in [Panning Angle]/[Tilt Angle].
3 Press the recording start/stop button. (When [Party Scene]/[Moving Object] is selected) ≥ Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It takes time until recording starts. ≥ The Remote Pan Tilt Cradle operates within the range set in advance. (When [Manual]/[Preset Positions] is selected) ≥ Performing the operation of Step 2 during recording may cause the recording screen to shake or the Remote Pan Tilt Cradle to move from its original location.
Touch . ≥ The Remote Pan Tilt Cradle moves to the next position at approximately 5 second intervals. ≥ If you touch [Stop] while the Remote Pan Tilt Cradle is moving, it will stop midway. Cyclic Mode will be deactivated. ≥ If you touch [Pause] and touch another position button, Cyclic Mode will be deactivated. The Remote Pan Tilt Cradle will move to the position of the position button you have touched. ≥ In Cyclic Mode, turns of the position buttons without a registered position will be skipped.
(About [Party Scene]/[Moving Object]) ≥ Still pictures cannot be recorded during Motion picture recording. ≥ Depending on recording conditions, the colour tone of the image being recorded may change or subjects may not be recorded automatically in cases such as the following: j The subject is too large or too small j The background and the subject are similar in colour j The recording location is dark j Bright light is detected (sky, TV, lamp, etc.
Remote Pan Tilt Cradle settings When the Remote Pan Tilt Cradle is connected to this unit, the Remote Pan Tilt Cradle setup menu can be set. ≥ Connecting the Remote Pan Tilt Cradle to this unit (l 248) 1 2 Touch [SETUP] in the Remote Pan Tilt Cradle Mode screen. Touch desired menu item. [Panning Angle] [±180°]/[±90°]/[±45°]/[Stationary] Set the left/right pan range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object]. [±180°]: Pans to the left/right up to approx. 180 o.
[Version Up] You can update the firmware version of the Remote Pan Tilt Cradle. For the latest update information, check the support website below. (As of December 2014) http://panasonic.jp/support/global/cs/e_cam (This Site is English only) ≥ Before updating this unit, update the Remote Pan Tilt Cradle. If you update this unit first, the Remote Pan Tilt Cradle may become unusable. [Party Scene Demo] You can watch the demonstration of how the Remote Pan Tilt Cradle will operate when [Party Scene] is set.
Panasonic Corporation Web site: http://www.panasonic.