User Manual

ManualsBrandsPanasonic ManualsCamcorders4K Ultra HD Camcorder

161

162

163

164

165

166

167

168

169

170

- 163 -

Using [Hom.Monitor]

≥ Perform the home monitoring operation on the smartphone. (l 167)

≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the

network settings.

∫ If the device is Android (NFC-compatible)

≥ Set the NFC function of the smartphone to ON.

1 Turn off the Wi-Fi setting of the smartphone.

2 Start up the smartphone application “Image App”.

≥ When a Wi-Fi connection guidance screen is displayed, select [NO].

3 Enable the home monitoring setting from the menu of the smartphone

application “Image App”.

≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home

Monitor].

4 Select [Set connect. dest.] of the smartphone.

5 Touch the smartphone on of this unit.

≥ Touch the NFC mark while a message asking you to touch the

NFC mark on the device is displayed on the smartphone

screen.

≥ If this is the first time the smartphone is connecting to this unit,

touch [YES] on the screen of this unit, and then touch the

smartphone on of this unit again.

≥ If the unit is not recognised even when touching the smartphone, change positions and try again.

≥ You cannot set up a connection when recording an image with this unit.

≥ Check that the message “Connecting...” has disappeared from this unit.

6 When [Start “Home Cam”?] is displayed on the smartphone, select [YES],

and start home monitoring.

∫ Connecting with Android (non-NFC-compatible) or iOS device

1 Press Wi-Fi button on this unit and touch [Hom.Monitor].

2 Turn off the Wi-Fi setting of the smartphone.

3 Start up the smartphone application “Image App”.

≥ (If the device is Android)

When a Wi-Fi connection guidance screen is displayed, select [No].

≥ (If the device is iOS)

If a confirmation message for the Wi-Fi setup is displayed, select [Close].

4 Enable the home monitoring setting from the menu of the smartphone

application “Image App”.

≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home

Monitor].

When using the home monitor function for the first time