Operation Manual

- 100 -
∫ To select a scene
Touch the scene to be played back.
≥ The scene selection is made as you touch it, and the indication appears on the thumbnail. To
cancel the operation, touch the scene again.
≥ When part of a scene has been selected, the indication appears on the thumbnail. If you
touch the thumbnail, the scene will be displayed by 3 second thumbnails.
≥ Next (previous) page is displayed by touching / .
∫ To select part of a scene
1 Touch [3 sec].
≥ To cancel the operation, touch it again.
2 Touch the desired scene.
≥ The touched scene is displayed by 3 second thumbnails.
3 (To select a single thumbnail)
Touch the thumbnail of the part you want to play back.
≥ The thumbnail selection is made as you touch it, and the indication (white) appears on the
thumbnail. To cancel the selection, touch the thumbnail again.
≥ Next (previous) thumbnail is displayed by touching / .
≥ Touching [Return] when the thumbnail has been selected returns you to the screen that displays
the thumbnails of scenes. The indication appears on the thumbnail of the scene
containing the selected part.
4 (To select thumbnails by specifying a range)
Touch [Range].
≥ To cancel the operation, touch it again.
5 (To select thumbnails by specifying a range)
Touch the range (start and finish points) you want
to play back.
≥ The range between start and finish points are selected, and the
indication (white) appears on the thumbnails.
≥ To cancel the selected thumbnails, from among the thumbnails
with the indication (white), touch the range (start and finish
points) you want to cancel.
≥ If you touch [Enter]/[Return]/[Music]/[Range] when a start point
has been selected, the start point thumbnail will be cancelled.
≥ Touching [Return] when the thumbnail has been selected
returns you to the screen that displays the thumbnails of
scenes. The indication appears on the thumbnail of the scene containing the selected
part.
≥ You can also select multiple ranges within the same scene.
≥ Next (previous) thumbnail is displayed by touching / .
≥ To select other scenes, touch [Return] to return to the screen that displays the thumbnails of
scenes, and perform the following operations.
j When selecting a scene:
Touch the desired scene.
j When selecting part of a scene:
Perform the operations in Steps 1-5.
3S
3S


A Start point
B Finish point
3S