User manual

Table Of Contents
- 23 -
1 Open the LCD monitor, and set
this unit to Motion Picture
Recording Mode. (l 18)
2 Press the recording start/stop
button to start recording.
3 Press the recording start/stop
button again to pause recording.
Recording can also be started/stopped by touching the recording button icon.
Screen indications in the Motion Picture Recording Mode
Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen. (l 31)
It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
If the recording/playback button is pressed during motion picture recording, the recording
will stop and this unit will be switched to Playback Mode.
To change the recording format, change the [REC FORMAT] or [REC MODE]. (l 76, 77)
Still pictures can be recorded while recording the motion picture. (l 26)
The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
Basic
Recording motion pictures
Recording mode
R1h20m
Approximate remaining recordable time
When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
“h” is an abbreviation for hour, “m” for
minute and “s” for second.
Each time the unit is put into recording
pause, the counter display will be reset
to 0h00m00s.
T
W
A When you begin recording, ; changes to ¥.
B Recording button icon
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m