Owner’s Manual 4K Video Camera Model No. HC-WXF991 HC-VX981 Please read these instructions carefully before using this product, and save this manual for future use. Register online at http://shop.panasonic.com/support (U.S.
Read this first type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. ∫ About the recording format for recording motion pictures You can select from AVCHD*1, 4K MP4*2, MP4*2, iFrame*2 or 24p*2 recording formats to record motion pictures using this unit. (l 91) *1 *2 It is compatible with the AVCHD Progressive (1080/60p).
≥ The smartphone and tablet are indicated as “smartphone”.
Contents Read this first ................................................. 2 Preparation Names and Functions of Main Parts ............ 7 Power supply................................................ 11 Inserting/removing the battery ............... 11 Charging the battery .............................. 12 Charging and recording time ................. 13 Recording to a card ..................................... 16 Cards that you can use with this unit ..... 16 Inserting/removing an SD card ..............
Advanced (Playback) Copy/Dubbing Playback Operations ................................. 103 Motion picture playback using operation icon ...................................... 103 Creating still picture from motion picture.................................................. 104 Highlight & Time Frame Index ............. 104 Repeat Playback ................................. 105 Resuming the previous playback......... 105 Setting the playback speed of FULL HD Slow Motion Video ...............
Connecting from the history................. 191 If the Wi-Fi connection cannot be established .......................................... 192 How to Use the [Wi-Fi Setup] Menu ......... 194 Wireless Twin/Multi-Camera Wireless Twin/Multi-Camera function ...... 200 Notes on the Wireless Twin/ Multi-Camera function ......................... 202 Using a Smartphone as a Wireless Sub Camera........................................................
Preparation Names and Functions of Main Parts 4 1 2 5 3 6 1 2 Video light (l 86, 102) Lens (LEICA DICOMAR) ≥ For information on how to attach the supplied lens hood, refer to page 27. 3 4 Infrared light (l 86) Internal microphones WXF991 5 Lens cover ≥ The lens cover opens in Motion Picture Recording Mode or Still Picture Recording Mode. (l 20) 6 Multi Manual Dial [CAMERA FUNCTION] (l 73, 100) VX981 9 7 8 7 8 9 10 10 7 Grip belt Adjust the length of the grip belt so that it fits your hand.
WXF991 VX981 11 21 22 12 13 14 12 13 14 モバヷ 17 18 16 15 16 モバヷ 19 21 17 18 ヮリヤ 15 19 20 ヮリヤ 20 WXF991 only Recording mode selector button [ /4K PHOTO/ ] (l 21) 12 Recording/playback button [ / ] (l 20) 13 HDR button [ ] (l 50) 14 Wi-Fi button [Wi-Fi] (l 157, 163, 166, 171, 173, 177, 191, 194, 203, 207) 15 Battery release lever [BATT] (l 11) 16 Power button [ ] (l 19) 17 USB terminal [ ] (l 142, 149, 229) 18 Micro HDMI connector [HDMI] (l 137) 19 A/V connector [A/V] (l 137, 151) 20 Micropho
WXF991 VX981 28 23 24 25 26 27 23 32 23 LCD monitor (Touch screen) (l 22) 28 24 29 30 31 ≥ It can open up to 90o. 29 ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. 24 Battery holder (l 11) 25 Shoulder strap fixture 26 Recording start/stop button (l 28) 27 Status indicator (l 19, 184) WXF991 only Eyecup ≥ Keep the Eyecup out of reach of children to prevent swallowing.
WXF991 VX981 35 35 37 36 37 36 38 38 39 40 39 40 41 35 Tripod receptacle ≥ Attaching a tripod with a screw length of 5.5 mm (0.22 q) or more may damage the unit.
Preparation Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBT190/VW-VBT380. ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBT190/VW-VBT380) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic.
Charging the battery When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Do not use the AC adaptor/DC cable with any other equipment as it is designed only for this unit. Also, do not use the AC adaptor/DC cable from other equipment with this unit.
Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60%RH ≥ When using the LCD monitor ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. ≥ Charging times in parentheses are when charging from the USB terminal.
Battery model number [Voltage/Capacity (minimum)] Charging time Recording format Recording mode Maximum continuous recordable time Actual recordable time [4K MP4] [2160] 3 h 5 min (3 h 15 min) [2 h 25 min] 1 h 35 min (1 h 40 min) [1 h 15 min] [1080/50M] 3 h 30 min (3 h 45 min) [2 h 40 min] 1 h 50 min (1 h 55 min) [1 h 25 min] [1080/28M] 3 h 35 min (3 h 50 min) [2 h 45 min] 1 h 50 min (2 h) [1 h 25 min] [720] 4 h 10 min (4 h 30 min) [3 h 5 min] [iFrame] 4 h 15 min (4 h 35 min) [3 h 10 min]
For the VX981 Battery model number [Voltage/Capacity (minimum)] Charging time Recording format [4K MP4] Supplied battery/ VW-VBT190 (optional) [3.6 V/1940 mAh] [MP4/ iFrame] 2 h 20 min (5 h 20 min) [AVCHD] [24p] Battery model number [Voltage/Capacity (minimum)] Charging time Recording format [4K MP4] [MP4/ iFrame] VW-VBT380 (optional) [3.
Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash. ≥ Screen display will disappear when no touch operation is performed for a specific period of time. However, it will be constantly displayed when the remaining battery time becomes less than 30 minutes.
∫ About the Speed Class ratings for recording motion pictures Depending on [REC MODE] and [REC FORMAT], the required card differs. (l 91) Use a card that meets the following ratings of the SD Speed Class. Use of a non-compatible card may cause recording to stop suddenly. ≥ SD Speed Class is the speed standards regarding continuous writing. To check the class, see the labelled side, etc. of the card.
VX981 Access lamp [ACCESS] A ≥ When this unit is accessing the SD card, the access lamp lights up. 1 Open the SD card cover and insert (remove) the SD card into (from) the card slot B. ≥ Face the label side C in the direction shown in the illustration and press it straight in as far as it will go. ≥ Press the center of the SD card and then pull it straight out. 2 Securely close the SD card cover. ≥ Securely close it until it clicks. ≥ Do not touch the terminals on the back of the SD card.
Preparation Turning the unit on/off You can turn the unit on and off using the power button or by opening and closing the LCD monitor. ≥ (For the WXF991 ) You can also turn the unit on and off using the viewfinder. Turning the unit on and off with the power button Open the LCD monitor and press the power button to turn on the unit. A To turn off the unit Hold down the power button until the status indicator goes off. The status indicator lights on.
≥ In the following cases, opening the LCD monitor does not turn on the unit. Press the power button to turn on the unit. j When the unit is originally purchased j When you have turned off the unit using the power button ∫ Overheat detection When the internal temperature of the unit rises during use, a message will be displayed. When this happens, the unit will turn off automatically a few minutes later. ≥ Wait until the temperature has dropped before resuming use.
Switching this unit between Motion Picture Recording Mode and Still Picture Recording Mode Pressing a button to switch between Motion Picture Recording Mode and Still Picture Recording Mode [WXF991] バフレチヱラヰヵヰバ Recording mode selector button Each time you press this button, the Recording Mode switches in the following order: Motion Picture Recording Mode # 4K Photo Mode* # Still Picture Recording Mode * Still Picture Recording Mode is selected in the following situations: j When the Wireless Twin Camera fun
To display the recording mode switching icon Display of the recording mode switching icon will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen. ≥ The recording mode selector button and the recording mode switching icon are disabled when the Wireless Multi-Camera function is enabled. ≥ If the recording start/stop button is pressed in Still Picture Recording Mode or Playback Mode, this unit will be switched to Motion Picture Recording Mode.
∫ About the operation icons / / / : Touch when changing a page or performing settings. : Touch to return to the previous screen. ≥ (For the WXF991 ) When the viewfinder is in use, on-screen icons will be displayed but disabled. Open the LCD monitor to touch them. Viewfinder adjustment [WXF991] ∫ Diopter adjustment Adjust to make the image clear by rotating the diopter adjustment dial. ≥ Extend the viewfinder and close the LCD monitor to turn on the viewfinder.
About the Touch Menu Touch (left side)/ operation icons. (right side) of on the Touch Menu to switch the ≥ It is also possible to switch the operation icons by sliding the Touch Menu right or left while touching it. A Touch Menu T W Recording Mode T Playback Mode FOCUS WB W ALL SHTR MENU IRIS MENU You can change the operation icons to display.
Preparation Setting date and time The clock is not set at the time of purchase. Make sure to set the clock. ≥ When you turn on this unit, the message “Set home region and date/time.” may be displayed. Select [YES], and follow the steps below to make these settings: j Step 3 in [SET WORLD TIME] (l 38) j Steps 2–3 of “Setting date and time” 1 Select the menu. (l 37) MENU 2 : [SETUP] # [CLOCK SET] Touch the date or time to be set, then set the desired value using / .
Basic Before recording ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Recording button icon A when holding the unit at waist level. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.
∫ Attaching/Removing the lens hood This will reduce the extra light entering the lens in bright sunlight or backlight etc., making it possible to take clearer pictures. How to attach the lens hood 1 Align the lens hood with this unit. ≥ Attach the lens hood so that you can see its LOCK and UNLOCK arrows from above. 2 Rotate the lens hood’s mounting ring A to the LOCK side to tighten it. How to remove the lens hood Rotate the lens hood’s mounting ring to the UNLOCK side to loosen and remove it.
Basic Recording motion pictures 1 2 Open the LCD monitor or extend the viewfinder to switch to Motion Picture Recording Mode. (l 21) T W Press the recording start/stop button to start recording. A B 3 Recording button icon When you begin recording, ; changes to ¥. Press the recording start/stop button again to pause recording. ≥ Recording can also be started/stopped by touching the recording button icon.
Recording format Recording mode [4K MP4] File size and recording time [2160] Approx. 3 h [1080/50M] Approx. 3 h [MP4/iFrame] Other than [1080/50M] Approx. 4 GB or 30 min [24p] All Approx. 3 h ≥ (Maximum recordable scenes of a single SD card) Recording format [AVCHD] [4K MP4]/[MP4/iFrame]/[24p] Recordable scenes Approx. 3900 Approx. 89100 Different dates (l 107) Approx. 900 Approx.
Basic Recording still pictures 1 2 Open the LCD monitor or extend the viewfinder to switch to Still Picture Recording Mode. (l 21) Press the button halfway. (For Auto Focus only) Focus indication: A B 3 Press the Focus indication: ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful. Focus area (area inside brackets) button fully.
∫ About the screen indications in Still Picture Recording Mode R3000 Still picture operation indicator (l 234) R3000 25.9M MEGA 25.9M MEGA Remaining number of still pictures ≥ Flashes in red when [0] appears. Size of still pictures (l 101) MEGA Optical Image Stabilizer (l 30) Optical Image Stabilizer (l 80) ≥ Screen display will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen.
≥ Maximum number of recordable pictures that can be displayed is 9999. If the number of recordable pictures exceeds 9999, R 9999+ is displayed. The number will not change when the picture is taken until the number of recordable pictures is 9999 or less. ≥ The recording time may be long depending on the recording condition.
Basic Motion picture/Still picture playback 1 2 Set this unit to Playback Mode. (l 20) Touch the play mode select icon A. (l 24) ≥ You can also set by touching MENU , selecting [VIDEO SETUP] or [PICT. SETUP] # [MEDIA, VIDEO/PICTURE]. (l 37) 3 ALL Select the still picture C or the recording format of the motion picture D you wish to play back. ≥ Touch [Enter]. ≥ If you touch [4K MP4], its recording mode icon B will be displayed on the thumbnail screen.
≥ When [24p] is selected [2160/24p]/[1080/24p] ≥ The recording mode icon B is displayed in the thumbnail display when the item is touched.
Motion picture playback 1/;: 6: 5: ∫: Still picture playback Playback/Pause Fast rewind playback* Fast forward playback* Stops the playback and shows the thumbnails. 1/;: 2;: ;1: ∫: Slide show (playback of the still pictures in numerical order) start/ pause. Plays back the previous picture. Plays back the next picture. Stops the playback and shows the thumbnails. * When touched two times, the fast rewind/fast forward speed increases. (The screen display changes to / .
Motion picture compatibility ≥ This unit is based on AVCHD Progressive/AVCHD format/MPEG-4 AVC file format. ≥ Even if the devices used have compatible standards, when playback of motion pictures recorded using another device is performed using this unit, or when motion pictures recorded using this unit is played back in another device, playback may not proceed normally, or may not be possible. (Please check compatibility in the operating instruction of your device.
Basic Using the menu screen ≥ Touch 1 (left side)/ Touch MENU (right side) of on the Touch Menu to display . ∫ About Touch the top menu A. 3 Touch the submenu B. ≥ Next (previous) page is displayed by touching / . 4 5 . (l 24) guide display After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear. ≥ After the messages have been displayed, the guide display is canceled.
Basic Using the Setup Menu [DISPLAY] Set the display method for the screen information display. MENU : [SETUP] # [DISPLAY] # desired setting [5 SEC.]: Information is displayed on the screen for 5 seconds after starting the Motion Picture Recording Mode or Still Picture Recording Mode, starting to playback, or touching the screen. [ON]: Constantly displayed. [CLOCK SET] Please refer to page 25.
4 (Only when setting the region of your travel destination) Touch [DESTINATION]. ≥ Touch [ENTER]. ≥ When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1. 5 (Only when setting the region of your travel destination) Touch / to select your travel destination and touch [ENTER].
[DATE/TIME] It is possible to change the date and time display mode. MENU : [SETUP] # [DATE/TIME] # desired display [DATE]/[D/T]/[OFF] ≥ The date and time are not displayed while the recording mode switching icon is displayed. (l 21) ≥ When the Touch Shutter is enabled, the recording mode switching icon is constantly displayed. This causes the date and time to disappear from the screen. [DATE FORMAT] It is possible to change the date format.
[ECONOMY (BATT)] When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. MENU : [SETUP] # [ECONOMY (BATT)] # [ON] ≥ This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following cases: j Using the AC adaptor* j Using the USB cable for PC etc. j PRE-REC is used j During slide show playback j Using the Wi-Fi function * When [ECONOMY (AC)] is activated, this unit automatically turns off.
[ALERT SOUND] Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. When [OFF] is selected, the sound is not output at the start/end of recording, etc. MENU : [SETUP] # [ALERT SOUND] # desired setting (Volume low)/ (Volume high)/[OFF] 2 Beeps for 4 times When an error occurs, follow the instructions displayed on the screen. (l 238) ≥ Refer to page 102 when changing the shutter sound setting.
[POWER LCD] This makes it easier to view the LCD monitor in bright places including outdoors. MENU : [SETUP] # [POWER LCD] # desired setting +1 (Makes brighter)/ 0 (Normal)/ -1 (Makes less bright) ≥ These settings will not affect the images actually recorded. ≥ When the AC adaptor is in use, the LCD monitor is set to +1 automatically. ≥ Recordable time with the battery is shortened when the LCD monitor is made brighter. ≥ When the [VIDEO LIGHT] is set to [ON] or [AUTO] and it is lit, it cannot be set.
[TV ASPECT] Please refer to page 138. [INITIAL SET] Set to [YES] for changing the menu settings back to the default condition. MENU : [SETUP] # [INITIAL SET] ≥ Settings for [CLOCK SET] and [LANGUAGE] will not be changed. ≥ If you restore the default settings, this unit will switch to the Motion Picture Recording Mode. [Reset Wi-Fi Settings] Set to [YES] for changing the Wi-Fi settings back to the default condition.
[NUMBER RESET] Set the file number of the next 4K MP4 scene, MP4/iFrame scene, 24p scene and still picture to be recorded to 0001. MENU : [SETUP] # [NUMBER RESET] ≥ Folder number is updated and file number will start from 0001. (l 231) ≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET]. ≥ The file numbers of still pictures you record in Stop Motion Animation Assist Mode are not reset.
[MEDIA STATUS] The used space and remaining recordable time of the SD card can be checked. MENU : [SETUP] # [MEDIA STATUS] ≥ The remaining recordable time in the currently set Recording Mode is displayed only in the Motion Picture Recording Mode. ≥ Any remaining recordable time exceeding 99 hours and 59 minutes will be displayed as “99h59m+”. ≥ Touch [EXIT] to close the indication.
[O.I.S. DEMO] This item is used to start the Optical Image Stabilizer demo. MENU : [SETUP] # [O.I.S. DEMO] ≥ Touch [O.I.S. DEMO], the demonstration automatically starts. When you touch [EXIT], the demonstration will be canceled. [Eye-Fi TRANSFER] This item is displayed only when an Eye-Fi card is inserted. Please refer to page 152. [Eye-Fi DIRECT] This item is displayed only when an Eye-Fi card is inserted. Please refer to page 153.
[ONLINE MANUAL] You can check how to access the website where you can download the Owner’s Manual (PDF format). MENU : [SETUP] # [ONLINE MANUAL] # desired access method [URL display]: Displays the URL of the website on the LCD monitor of this unit. [USB connect]: Displays the website on a PC connected to this unit with the USB cable. [QR code]: Displays the QR code of the website on the LCD monitor of this unit. [LANGUAGE] You can select the language on the screen display and the menu screen.
Advanced (Recording) Using the zoom Zoom lever/Zoom button icons T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) T W T 6 W T W A Zoom bar ≥ Maximum zoom ratio for recording motion pictures can be set with [ZOOM MODE]. (l 90) ∫ About the zoom bar The zoom bar is displayed during the zoom operation. W T B C Optical Zoom Motion Picture Recording Mode: i.
Advanced (Recording) HDR Movie Mode You can minimize the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. ラュン HDR button You can switch from Recording mode to HDR Movie Mode by pressing this button. ≥ Press it once more to switch from HDR Movie Mode to Intelligent Auto Mode. ≥ It is also possible to switch to HDR Movie Mode by touching the Recording Mode button icon.
Advanced (Recording) Recording with the Sub Camera (Twin Camera) [WXF991] Using the Sub Camera and the Main Camera, you can record two images simultaneously. (Twin Camera) Use the Sub Camera to enjoy recording yourself, a family member next to you or scenery different from that seen from the Main Camera. A Recording a family member next to you Recording scenery Sub Camera Recording yourself B Sub Window ≥ The image of the Sub Camera is displayed on the Sub Window.
2 Rotate the Sub Camera dial to adjust its up/ down angle. Rotating the Sub Camera dial to the left : The Sub Camera points down. Rotating the Sub Camera dial to the right : The Sub Camera points up. ≥ You can adjust the angle up or down to approximately 20e from the position F. E 3 Start recording. ≥ Rotate the Sub Camera to the desired position. ≥ The Sub Camera works in Auto Focus, which adjusts focus automatically. ≥ Normally, hold this unit as shown in the illustration when recording.
∫ Displaying or hiding the Sub Window Touch . ≥ Each time you touch the icon, you can display or hide the Sub Window. ≥ When the Sub Window is hidden, the image of the Sub Camera will not be recorded. To exit the Twin Camera function Rotate the Sub Camera to a position in the range C (0e to approximately 30e). ≥ It takes some time until the Sub Window appears.
Changing and adjusting the settings of the Sub Camera and the Sub Window Changing the size of the Sub Window 1 2 Touch Sub Window. Touch to select the size you want to use. ≥ If you do not touch the Sub Window or perform any touch operation for a while, the Sub Window size will change. ≥ The available sub window sizes differ as shown below.
Changing the display position of the Sub Window 1 2 Touch Sub Window. Touch the display position you want to change. ≥ Depending on the display position of the Sub Window, the positions of the icons displayed on the screen may change. Setting and adjusting the Sub Camera and the Sub Window 1 2 3 Touch Sub Window. Touch . Touch the icon you want to set or adjust. FOCUS [WB] : Adjusts the color balance. : Adjusts the brightness. *1 [FOCUS] : Adjusts the focus.
(When is touched) Touch or . : Enables Narration Mode. : Disables Narration Mode. ≥ Touching the screen returns you to the recording screen. ≥ When Narration Mode is enabled, its icon will be constantly displayed on the screen. A B C ≥ You can enable or disable Narration Mode by touching on the recording screen. ≥ In Narration Mode, the settings for [5.1ch/2ch] and [MIC SETUP] are set as follows and cannot be changed: j [SURROUND] in [MIC SETUP], if [5.1ch/2ch] is set to [5.
Advanced (Recording) Recording with the Backup for Twin Camera Function When simultaneously recording two images with the Main Camera and Sub Camera, you can also record the Main Camera’s image as a separate scene. (Backup for Twin Camera) A B C Twin Camera Backup for Twin Camera SD card ≥ Even when using the Wireless Twin/Multi-Camera function, you can save the image being recorded with the Main Camera as a separate scene.
≥ When recording with [Backup for Twin Camera], use an SD card conforming to Class 10 of the SD Speed Class Rating. ≥ Scenes recorded as Backup for Twin Camera and scenes that show the Sub Window’s image will be saved on the same media. This causes the remaining recordable time to be halved. ≥ When [ON] is selected, two separate dates are used to record scenes simultaneously. As a result, compared to when [OFF] is selected, recording can be performed on fewer days.
Advanced (Recording) Changing the Recording Mode 1 Touch the Recording Mode button icon. MENU 2 Touch the desired Recording Mode button icon. Mode Intelligent Auto Intelligent Auto Plus You can add manually-adjusted brightness and color balance settings to the Intelligent Auto Mode, and record. (l 62) Creative Control You can record motion pictures with added effects.
Intelligent Auto The following modes (appropriate for the condition) are set just by pointing the unit to what you want to record. Mode Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly. Scenery The whole landscape will be recorded vividly without whiting out the background sky, which may be very bright. *1 Spotlight Very bright object is recorded clearly. *1 Low Light It can record very clearly even in a dark room or twilight.
∫ Intelligent Auto Mode When switching to Intelligent Auto Mode, the Automatic White Balance and Auto Focus operate and automatically adjust the color balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. ≥ The information on this page applies only to the Main Camera. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings.
Intelligent Auto Plus Please refer to page 60 for details about the effect of each mode. *1 *2 (Portrait)/ (Scenery)/ (Spotlight)*1/ (Low Light)*1/ (Night Scenery)*2/ (Macro)*2/ (Normal)*1/ (Normal)*2 In Motion Picture Recording Mode only In Still Picture Recording Mode only ≥ Change the Recording Mode to 1 (When adjusting the brightness) Touch / . (l 59) . (When adjusting the color balance) Touch . ≥ R side: Sets the balance to a reddish tone. B side: Sets the balance to a bluish tone.
MINI 1 [Miniature Effect] Touch to adjust the horizontal position of the in-focus portion. ≥ If you touch the screen, you can adjust the horizontal position of the in-focus portion. ≥ When no touch operations are performed for approximately 1 second, [Reset], [SIZE], and [ENTER] are displayed. If you touch the screen, you can readjust the horizontal position of the in-focus portion. ≥ Position of the in-focus portion will return to original position when you touch [Reset]. 2 Touch [SIZE].
8mm 1 [8mm movie] (When adjusting the brightness) Touch . ≥ The level of brightness is switched every time you touch the icon. (Standard) # (Bright) # (Dark) 2 (When adjusting the color balance) Touch . ≥ The level of color balance is switched every time you touch the icon. (Blue) # (Red) # (Yellow) 3 Start recording. ≥ The sound is monaural. SILN 1 [Silent movie] (When adjusting the brightness) Touch . ≥ The level of brightness is switched every time you touch the icon.
Audio cannot be recorded. [REC MODE] is set to [HA]. The shortest motion picture recording time is 1 second. The color balance and focus may not be adjusted automatically depending on the light source or scene. If so, manually adjust those settings. (l 74, 76) ≥ When recording for a long time, we recommend recording with the AC adaptor connected. ≥ ≥ ≥ ≥ HDR Movie Mode ≥ Change the Recording Mode to . (l 59) ≥ You can also press the HDR button to switch to this mode. Refer to page 50 for details.
Scene Mode ≥ Change the Recording Mode to . (l 59) Select the desired Scene Mode, then touch [ENTER]. Mode 5Sports: Effect To make fast moving scenes less shaky with slow playback and pause of playback Portrait: To make people stand out against the background Soft Skin: To makes skin colors appear softer for a more attractive appearance Spotlight: Improved quality when subject is brightly illuminated. Snow: Improved image quality when shooting in snowy locations.
Cinema Like Effect [WXF991] ≥ Change the Recording Mode to . (l 59) Select the desired Cinema Like Effect Mode, and touch [ENTER]. Mode Effect Slow & Quick Video Mode Allows you to switch images between slow and quick motion during recording. FULL HD Slow Motion Video Mode Allows you to record slow motion images. (l 68) Slow Zoom Mode Allows you to record images that slowly zoom in/out.
≥ The following limitations apply: j Audio is not recorded. ( is displayed.) j Still pictures cannot be recorded. j The size of the image displayed on the screen will change. j Images and sound are not output from this unit to another device. ≥ When you switch to Slow & Quick Video Mode, the screen may become black momentarily.
≥ The shutter speed is 1/120 or more. ≥ The following limitations apply: j The sound of the parts will not be recorded. ( will be displayed during the recording) j Still pictures cannot be recorded. j The size of the image displayed on the screen will change. j Images and sound are not output from this unit to another device. ≥ When you switch to FULL HD Slow Motion Video Mode, the screen may become black momentarily.
Dolly Zoom Mode 1 2 Touch [OK]. Align the subject's position with the center frame B. ≥ The face detection frame A will be displayed around the subject’s face. ≥ Adjust so that the face detection frame and center frame appear in the same size. When they appear in the same size, the color of the center frame changes from red to green. 3 Start recording. Touch the Auto Zoom button icon C ( to start Auto Zoom. AUTO A A B ≥ The image will be recorded in quick motion.
FULL HD Slow Motion Video [VX981] ≥ Change the Recording Mode to . (l 59) ≥ For information on how to use this mode, refer to “FULL HD Slow Motion Video Mode” on page 68. 4K Photo Mode ≥ Change the Recording Mode to 1 2 . (l 59) Record a motion picture. Switch this unit to Playback Mode, and create still pictures from the motion picture. (l 104) ≥ Scenes recorded with the 4K Photo Mode function are displayed with the thumbnail screen.
Stop Motion Animation Assist Before recording in Stop Motion Animation Assist Mode You can create a slideshow that appears to be moving by recording the subject while moved a little at a time. ≥ Each recording group can store up to 999 still pictures recorded in Stop Motion Animation Assist Mode. ≥ Change the Recording Mode to 1 2 . (l 59) Press the button to record the still pictures. (l 30) Touch [Enter].
Advanced (Recording) Manual recording ≥ The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain) settings are retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. Push the Multi Manual Dial to switch to Manual Mode, or display the Manual icon.
White Balance Automatic White Balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. ≥ Switch to Manual Mode. (l 73) ≥ For information on how to set items with the Multi Manual Dial, refer to page 73. 1 2 Touch [WB]. Touch / MNL FOCUS to select White Balance Mode. ≥ Touch [WB] to select the mode.
Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Switch to Manual Mode. (l 73) ≥ For information on how to set items with the Multi Manual Dial, refer to page 73. 1 2 Touch [SHTR] or [IRIS]. Touch / to adjust settings. ≥ Touch [SHTR]/[IRIS] to end the adjustment. SHTR : Shutter speed: 1/60 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000.
Manual Focus adjustment If auto focusing is difficult due to the conditions, then use Manual Focus. ≥ Switch to Manual Mode. (l 73) ≥ For information on how to set items with the Multi Manual Dial, refer to page 73. Rotate the Multi Manual Dial to set focus. 1 (When MF assist function is used) Select the menu. MENU : [RECORD SETUP] # [MF ASSIST] # [ON] ≥ Touch 2 3 to display the Manual icon. Touch [FOCUS]. Touch [MF] to change to Manual Focus. ≥ MF appears on the screen.
Using the Expanded Focus Assist function When recording with a [REC FORMAT] setting of [4K MP4] or [24p] (and with a [REC MODE] setting of [2160/24p]), you can magnify the screen to adjust the focus. You can magnify the screen to adjust the focus. It is also possible to change the magnification window’s magnification level and position. ≥ When [MF ASSIST] is set to [ON], in-focus portions are highlighted in blue. (Between 3k and 5k) (Between 5.5k and 10k) 3.0X 5.
∫ To adjust the magnification window's magnification level or position with the Multi Manual Dial 1 3.0X Push and hold the Multi Manual Dial. ≥ A portion of the screen will be magnified. A 2 Push the Multi Manual Dial. 3.0X ≥ / will be selected and highlighted in yellow. ≥ Each push of the Multi Manual Dial switches the selected icon(s). / # / # / # [EXIT] # No selection ≥ If you touch the screen, the icon selection will be canceled. 3 [EXIT] Rotate the Multi Manual Dial to make adjustments.
Advanced (Recording) Recording with the Touch Function You can record using convenient functions just by the easy operation of touching the screen. 1 2 Touch (left side)/ (right side) of Touch Function icons. (l 24) on the Touch Menu to display Touch the Touch Function icon. (e.g. AF/AE tracking) ≥ To cancel, touch the Touch Function icon again. (Optical Image Stabilizer Lock is canceled by releasing the finger touching .
Image Stabilizer Function Use the Image Stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer. Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer. Touch to switch the Image Stabilizer on/off. ≥ The icon at position A is switched. (Motion Picture Recording Mode) / # (setting canceled) ≥ When [HYBRID O.I.S.] is [ON], is displayed. When [OFF], is displayed.
AF/AE tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. 1 Touch . ≥ An icon is displayed B. 2 Touch the object and lock the target. ≥ When you touch the head of the object, the target frame on the head gets locked and tracking starts. ≥ Touch the object to be changed again when you want to change the target.
Optical Image Stabilizer Lock In Motion Picture Recording Mode, you can further improve optical image stabilization by touching and holding . With this function, you can further reduce the effects of the shake that tends to occur when using zoom. 1 2 Touch to turn the Image Stabilizer on. (l 80) Touch and hold . ≥ Icon is displayed in A while you are touching and holding . ≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
Advanced (Recording) Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. 1 2 Touch (left side)/ (right side) of operation icons. (l 24) on the Touch Menu to display the Touch an operation icon. PRE-REC (e.g. PRE-REC) ≥ The operation icons that are displayed in the Touch Menu can be changed. ([SELECT OPERATION ICONS]: l 42) ≥ Select the operation icon again to cancel the function.
Fade When you start recording, the image/audio gradually appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The Fade setting is canceled when the recording stops. ∫ To select the color for fade in/out (Fade in) (Fade out) : [RECORD SETUP] # [FADE COLOR] # [WHITE] or [BLACK] MENU ≥ The thumbnails of scenes recorded using fade in become black (or white).
≥ After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3 seconds before pressing the recording start/stop button cannot be recorded. ≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures displayed at the start of playback. Self-timer This is for recording still pictures using the timer.
Video light It is possible to record with illumination even in dark places. Each time the icon is selected, the indication changes by one setting in the following order. In motion picture recording mode: ([ON]) # ([AUTO]) # ([OFF]) In still picture recording mode: ([ON]) # ([OFF]) : Always on. : : Turns on/off automatically according to brightness of the surroundings. Cancel the setting. ≥ When the battery is low and the light cannot be lit, the ≥ ≥ ≥ ≥ ≥ ≥ will be displayed on the screen.
≥ Using a tripod is recommended. ≥ In darker areas, Auto Focus may focus a bit slower. This is normal. ≥ Night Mode is not available when [REC FORMAT] is set to [24p] and [WIDE CONV. LENS SET] is set to [ON]. Night Mode ([COLOR]) ≥ Recorded scene is seen as if frames were missed. ≥ If set in a bright place, the screen may become washed out for a while. ≥ Bright dots that are usually invisible may be seen, but this is not a malfunction. Night Mode ([Infrared]) ≥ Do not use ([Infrared]) in a bright location.
≥ This function's default setting is (Normal). ≥ The range that this icon can be displayed correctly the slope is about 45 o to the horizontal direction. ≥ Level Shot Function is canceled when [LEVEL GAUGE] is set to [ON]. (l 93) ≥ When recording horizontal images using a tripod, attach the unit on the tripod using [LEVEL GAUGE], and then set Level Shot Function to (Normal) or (Strong) before use. ≥ When you switch the setting of the Level Shot Function, the screen may become black momentarily.
Advanced (Recording) Recording functions of menus [SCENE MODE] This function is identical to Scene Mode in Recording Mode. (l 66) The shutter speed and aperture, etc. are automatically adjusted to match the scene you want to record. ≥ This item is displayed in the menu only when [Time Lapse Rec] in Creative Control Mode is set.
[ZOOM MODE] Set the maximum zoom ratio for the Motion Picture Recording Mode. MENU : [RECORD SETUP] # [ZOOM MODE] # desired setting [Opt.Zoom 20k]: *1 Optical zoom only (Up to 20k) [i.Zoom 25k] : This zoom function allows you to maintain 4K picture quality. (Up to 25k) [i.Zoom 40k]*2: This zoom function allows you to maintain high-definition picture quality. (Up to 40k) [D.Zoom 60k]: Digital zoom (Up to 60k) [D.
[REC FORMAT] Switch the recording format of motion picture. MENU : [RECORD SETUP] # [REC FORMAT] # desired setting [4K MP4]: Set the recording format to 4K MP4. (l 2) [MP4/iFrame]: Set the recording format to MP4/iFrame. (l 2) [AVCHD]: Set the recording format to AVCHD. (l 2) [24p] Set the recording format to 24p. (l 2) ≥ Use an SD card conforming to Class 10 of the SD Speed Class Rating when you want to record motion pictures to the SD card using the setting [4K MP4] or [24p].
≥ When [REC FORMAT] is set to [AVCHD] [PH]/[HA]/[HG]/[HE]: (A B) Set the recording format to 1080/60i. [1080/60p]*3: Set the recording format to 1080/60p. A Favors image quality B Favors Recording time ≥ When [REC FORMAT] is set to [24p] [2160/24p]: Set the recording format to 2160/24p (72 Mbps). [1080/24p]: Set the recording format to 1080/24p (50 Mbps). *1 *2 *3 [1080/50M]/[1080/28M] and [720] are recording modes suitable for playing back or editing on a PC.
[LEVEL GAUGE] This function displays the horizontal/vertical tilt of the unit with the electronic level. MENU : [RECORD SETUP] # [LEVEL GAUGE] # [ON] ∫ To correct the tilt (Horizontal direction) (Vertical direction) When correcting the leftward tilt When correcting the downward tilt ≥ The horizontal tilt display A and vertical tilt display B appear yellow when there is a tilt, and appear green when there is almost no tilt.
[AUTO SLOW SHTR] You can record bright pictures even in dark places by slowing the shutter speed. ≥ Switch to Manual Mode. (l 73) MENU : [RECORD SETUP] # [AUTO SLOW SHTR] # [ON] ≥ The shutter speed is set to 1/30 or more (1/24 or more when [REC FORMAT] is set to [24p]) depending on the ambient brightness. ≥ This function cannot be used in Still Picture Recording Mode. ≥ When the shutter speed becomes 1/30 or 1/24, the screen may be seen as if frames are missed and afterimages may appear.
[WIDE CONV. LENS SET] This will change the setting of the Image Stabilizer function and Maximum zoom ratio to the one appropriate for the recording when a Wide Conversion Lens (optional) is attached to this unit. MENU : [RECORD SETUP] # [WIDE CONV. LENS SET] # [ON] ≥ The following functions will not work: j Video light j [AF ASSIST LAMP] j Night Mode ([Infrared]) ≥ In Motion Picture Recording Mode, [ZOOM MODE] (l 90) is fixed to [Opt.Zoom 10k] (up to 10k).
[Sound Scene Select] You can set the built-in microphone's sound quality as appropriate for the scene you want to record. ≥ Set [MIC SETUP] to [SURROUND] or [STEREO MIC]. (l 98) 1 Select the menu. MENU 2 : [RECORD SETUP] # [Sound Scene Select] # desired setting [Auto]: Records sounds with standard settings. [Music]: For recording scenes in which you need to cover a wide sound range and a wide volume range, such as music concerts.
(When [Directional] is selected in Step 2) Select an item. 4 [SURROUND]/[STEREO]: Records sounds with the setting of [MIC SETUP] ([SURROUND] or [STEREO MIC]). [MONO]: Records sounds from all directions without setting specific directivity. Touch [EXIT]. appears on the screen. ≥ ≥ Depending on the recording condition or sound quality, the desired effect may not be achieved. ≥ The option is set to [Auto] when an external microphone is connected.
[MIC SETUP] Recording setting of the built-in microphone can be adjusted. ≥ Set [REC FORMAT] to [AVCHD]. (l 91) MENU : [RECORD SETUP] # [MIC SETUP] # desired setting [SURROUND]*1: Records the surrounding sound with added realism. [ZOOM MIC]: Sound is recorded with changing the directionality in conjunction with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle).
[MIC LEVEL] When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. 1 Select the menu. MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: 2 AGC is activated, and the recording level is adjusted automatically. [SET ]: The desired recording level can be set. AGC is activated, and sound distortions are reduced. [SET ]: The desired recording level can be set. Sounds are recorded in natural quality.
[PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ This setting is retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. ≥ Switch to Manual Mode. (l 73) 1 Select the menu. MENU 2 3 4 : [RECORD SETUP] # [PICTURE ADJUST] Touch the desired setting items.
[PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. : [PICTURE] # [PICTURE SIZE] # desired setting MENU ≥ The number of recording pixels that can be set changes depending on selected screen aspect ratio. (l 102) ∫ Picture size and Maximum zoom ratio in Still Picture Recording Mode Picture size Aspect ratio 20.4M 5216k3912 10.9M 3808k2856 Extra Optical Zoom (l 49) –* –* 4:3 0.3M 640k480 50k 20M 5472k3648 –* 10.
[ASPECT RATIO] This allows you to select the aspect ratio of the pictures to suit printing or the playback method. MENU : [PICTURE] # [ASPECT RATIO] # desired setting [4:3]: Aspect ratio of 4:3 television [3:2]: Aspect ratio of conventional film camera or prints (such as L-size print) [16:9]: Aspect ratio of high-definition television, etc. ≥ This function’s default setting is [16:9]. ≥ When the aspect ratio is set to [4:3] or [3:2], black bands may appear on the left and right of the screen.
Advanced (Playback) Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 33. Playback operation Playback display Operating steps During Playback Touch the LCD monitor and slide from right to left (from left to right) during playback. Skip Playback (to the start of a scene) Slow-motion Playback During Pause With the playback paused, continue touching .
Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. The size of pictures to be recorded is determined by their scene type. Scene type Picture size 4K MP4 scenes Scene(s) recorded in the recording mode [2160/24p] 8.
3 (When [MINUTES] is selected) Touch / to set the time. ≥ It can be set up to a maximum of 60 minutes. ≥ Touch [ENTER]. 4 Touch the thumbnail to be played back. ≥ Next (Previous) thumbnail can be displayed by touching / . Repeat Playback Playback of the first scene starts after playback of the last scene finishes. MENU : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. ≥ All the scenes are played back repeatedly.
Setting the playback speed of FULL HD Slow Motion Video You can set the speed at which this unit will play back parts recorded as FULL HD Slow Motion Video. ≥ Touch the play mode select icon, and select [ALL MP4/iFrame] or [1080/60p] in [MP4/ iFrame]. MENU : [VIDEO SETUP] # [SLOW PLAY SPEED] # desired setting [Super Slow]: Plays back at 1/4 normal speed. [Slow]: Plays back at 1/2 normal speed. ≥ If you play back the parts on another device, they will be played back at 1/2 normal speed.
Advanced (Playback) Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 Touch the date select icon. (l 24) A ALL Date select icon 2 Touch the playback date. 3 Touch the scene or the still picture to be played back. The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
≥ The following scenes and still pictures are grouped separately on the date list, and icons are displayed according to the category: Scene or still picture Icon to be displayed Scenes recorded with [1080/60p] in [AVCHD] Scenes recorded with [1080/50M]/[1080/28M] in [MP4/iFrame] Scenes saved in MP4 (1920k1080/30p) (l 134) Scenes recorded with [720] in [MP4/iFrame] Scenes saved in MP4 (1280k720/30p) (l 134) Scenes recorded with [iFrame] in [MP4/iFrame] Still pictures recorded in Stop Motion Animation Assis
Function Effect [Zooming Crop] Allows you to save a cropped image that changes its position and size in high-definition picture quality after setting the cropping positions and sizes for start and end points. [Tracking Crop] Allows you to save a cropped image that tracks the subject specified with touch operation in high-definition picture quality.
4 5 Touch . Touch the desired zoom speed. 0h00m15s [Fast]/[Slow] ≥ The scene will be skipped to the end point. Depending on the set zoom speed, the end point will vary. ≥ Touch [OK]. 6 Adjust the size and position of the cropping frame for the end point. ≥ The cropping frame for the end point will be displayed in the same position as the cropping frame for the start point. ≥ The cropping frame for the start point is indicated in gray, while the cropping frame for the end point is indicated in white.
≥ Depending on the portion you touch, you may not be able to track or lock another subject in situations such as the following: j When another subject is too large or small j When the background and another subject are similar in color j When you have touched a dark portion Applying [Stabilizing Crop] 1 Touch the scene to which you want to apply the function. ≥ Touch [OK]. 2 Touch . ≥ A preview will start from the beginning of the scene. ≥ When a preview is played back for 1 hour (approx.
Highlight Playback Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played back or stored in a short time with effects and music added. It is also possible to create an original Highlight Playback by checking your favorite scenes and setting up to extract those scenes. 1 Touch . (l 24) ALL 2 (When [ALL MP4/iFrame] is selected) Touch the recording format of the scene to be played back.
s Scenes that were converted to MP4 scenes and copied (with the MP4 conversion function) (l 134)* s (For the WXF991 ) Scenes recorded with Slow & Quick Video Mode (l 67) and Dolly Zoom Mode (l 70) * Excluding scenes that were converted from 4K MP4 scenes ≥ Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not possible.
Playing back with the settings changed Touch [SET] to select the item to change. [SCENE SETUP]*1: Select the scene or date to be played back. [FAVORITE SCENE SETUP]*2: Set up the favorite scenes. (l 115) [FAVORITE SCENE PLAY]*2: Set up if the favorite scenes are to be included in the Highlight Playback or not. (l 115) [PRIORITY SETUP]: Select the target to give priority to play back. (l 115) [PLAYBACK TIME]: Select the time to play back.
∫ Checking the favorite scenes 1 2 Touch the scenes to be played back. Touch [Add] and add the favorite part. ≥ Approximately 4 seconds before and after touching [Add] will be added as favorite. ≥ Number of favorite scenes that can be added are 1 to 14. (Number of scenes that can be added differs depending on the scenes selected.) ≥ Favorite check display (A) is displayed in orange, and favorite check display B is displayed on the slide bar.
∫ Playback time setting Touch the playback time. [APPROX 90 SEC.]/[APPROX 3 MIN.]/[AUTO] ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even be played back if the part recognized as clearly recorded is short. ∫ Setting up the title 1 Touch / to select your favorite title sheet. [NONE]/[PICTURE 1]/[PICTURE 2]/[PICTURE 3]/[PICTURE 4] ≥ Title and date will not be displayed when [NONE] is selected. 2 Touch [TITLE].
Saving the Highlight Playback The scenes put together as a Highlight Playback can be saved as a single scene. The recorded scenes can be saved in the SD card. 1 2 3 Stop the playback of the Highlight Playback or wait until the Highlight Playback is finished. Touch [SAVE]. Select the format to save. [AVCHD 1920k1080/60i]*1: [MP4 1920k1080/30p]*2, 3, 4: It will be saved in high-definition image quality. It will be saved in high-definition image quality. The format supports playback on a PC.
Manual Edit You can join desired AVCHD scenes, scenes recorded as Backup for Twin Camera or parts of these scenes in the order they were recorded to play back or save as a single scene with music added. ≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select scenes recorded as [AVCHD] or Backup for Twin Camera. (l 33) 1 Select the menu. MENU 2 : [EDIT SCENE] # [MANUAL EDIT] Touch [1080/60p] or [1080/60i]. ≥ Touch [Enter]. ≥ Thumbnails are displayed by each scene.
≥ When saving a manually edited scene, check the free space on the SD card. Before selecting the scene, check the table below and create sufficient free space for saving it. (Approximate free space requirements for saving a manually edited scene) Saving format Total time of an edited scene [AVCHD 1920k1080/60i] [MP4 1280k720/30p] [MP4 640k360/30p] Free space required 30 min Approx. 4 GB 1h Approx. 8 GB 30 min Approx. 2 GB 1h Approx. 4 GB 30 min Approx. 0.4 GB 1h Approx. 0.
4 (To select thumbnails by specifying a range) Touch [Range]. ≥ To cancel the operation, touch it again. 5 (To select thumbnails by specifying a range) Touch the range (start and finish points) you want to play back. ≥ The range between start and finish points are selected, and the indication (white) appears on the thumbnails. ≥ To cancel the selected thumbnails, from among the thumbnails with the indication (white), touch the range (start and finish points) you want to cancel.
∫ To save a manually-edited scene You can save manually edited scenes as a single scene. The recorded scenes can be saved in the SD card. 1 2 3 Stop the playback of a manually-edited scene or wait until the playback is finished. Touch [SAVE]. Select the format to save. [AVCHD 1920k1080/60i]: It will be saved in high-definition image quality. [MP4 1280k720/30p]: It will be saved with an image quality, allowing you to upload it on the Internet in higher image quality.
Baby Calendar When a baby’s birthday and name are registered, scenes recorded since the baby’s birthday are displayed as thumbnails for each age in months. ≥ You cannot select scenes recorded as 24p or Backup for Twin Camera. ≥ Scenes recorded before the birthday are not displayed. ≥ Scenes with no baby in them are also displayed. ≥ You can register up to 3 babies. 1 Touch . MENU 2 (When registering for the first time) Enter the baby’s birthday.
≥ If you touch the name display, the screen for selecting a registered baby is displayed. From among the 3 registered babies, select the baby you want to display, and touch [ENTER]. If you touch a name with no registered birthday ([Baby 1]/[Baby 2]/[Baby 3]), you can register a new baby. Perform Step 2-3. 5 Touch the thumbnail in the center. ≥ The thumbnails of the scenes recorded in the same age in months are displayed. Touch the desired scene to select the playback operation.
Tagging Favorite Scene You can extract portions of a 4K MP4 scene that were recognized by this unit as clearly recorded or that you registered as favorite scenes while recording the 4K MP4 scene, and save the extracted portions as still pictures. ≥ For information on the registration of favorite scenes, refer to page 32. ≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select [4K MP4]. (l 33) 1 Touch . ≥ Touch [OK]. 2 3 4 5 Touch the desired scene.
Changing the playback settings and playing back the slide show 1 Touch . (l 24) ALL 2 (Only when you would like to change the settings) Touch [SET] to select the item to change. [DATE SETUP]: Select the date to be played back. [SLIDE INTERVAL]*: Select the interval between still pictures at playback. [EFFECT SETUP]*: Select the effect for playback. [MUSIC SELECT]: Select the music to be played on playback.
(When [MUSIC SELECT] is selected) Touch the desired sound. ≥ Touch [ENTER]. ≥ [USER BGM] lets you use the music stored on your smartphone. To set [USER BGM], use the Wi-Fi function [Link to Cell] and create Highlight Playback from the smartphone app “Image App”. The music data will be saved in this unit as [USER BGM]. ≥ Only one track can be saved in this unit as music data for [USER BGM]. Each time you create Highlight Playback using the “Image App”, music data will be replaced.
Playing back still pictures recorded in Stop Motion Animation Assist Mode as a slide show ≥ For details on recording in Stop Motion Animation Assist Mode, refer to page 72. 1 Touch . ≥ The recording group created most recently in Stop Motion Animation Assist Mode is displayed. ≥ Touching again, returns the display to the normal thumbnail display. 2 MENU Touch a thumbnail to play back the slide show. ≥ The thumbnail display cannot be set to 9 scenes or 20 scenes display.
Advanced (Playback) Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Press the recording/playback button to switch this unit to the Playback Mode. ∫ To delete the scene or still picture being played back Touch while scenes or still pictures to be deleted are being played back.
When you stop deleting halfway: Touch [CANCEL] while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing: Touch [Return]. ≥ You can also delete scenes by touching MENU , selecting [EDIT SCENE] # [DELETE] # [ALL SCENES], [MULTI] or [SINGLE]. ≥ You can also delete still pictures by touching MENU , selecting [PICT. SETUP] # [DELETE] # [ALL SCENES], [MULTI] or [SINGLE].
Deleting part of a scene (AVCHD/Backup for Twin Camera) Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be deleted. The deleted scenes cannot be restored. ≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select scenes recorded as [AVCHD] or Backup for Twin Camera. (l 33) 1 Select the menu. MENU 2 3 : [EDIT SCENE] # [SECTION DELETE] Touch the scene with a part to delete.
Dividing a scene (AVCHD/Backup for Twin Camera) It is possible to divide an AVCHD scene or a scene recorded as Backup for Twin Camera. Any unwanted parts in the scene can be deleted after dividing. ≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select scenes recorded as [AVCHD] or Backup for Twin Camera. (l 33) 1 Select the menu. MENU 2 : [EDIT SCENE] # [DIVIDE] # [SET] Touch and play back the scene you want to divide.
Dividing a scene to partially delete (4K MP4, MP4/ iFrame) Divide the 4K MP4 scenes or MP4/iFrame scenes, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes deleted by dividing cannot be restored. ≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select scenes recorded as [4K MP4] or [MP4/iFrame]. (l 33) 1 Select the menu.
Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Press the recording/playback button to switch this unit to the Playback Mode. 1 Select the menu. MENU : [VIDEO SETUP] or [PICT. SETUP] # [SCENE PROTECT]* * [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected transfer setting device in advance on the computer.
Advanced (Playback) Convert to MP4 You can convert and copy AVCHD scenes, scenes recorded as Backup for Twin Camera, and MP4 scenes. The image quality will be converted into a format that supports playback on a PC and online sharing (MP4 (1280k720/30p) or MP4 (640k360/30p)). ≥ 4K MP4 scenes can also be converted to high-definition picture quality (MP4 (1920k1080/30p)) scenes and copied. 1 Select the menu. MENU 2 : [EDIT SCENE] # [CONVERT TO MP4] Touch the scene you want to convert.
To stop converting to MP4 halfway Touch [CANCEL] during format conversion. To exit the MP4 conversion Touch [Return]. ≥ [CONVERT TO MP4] is not available for the following scenes: j iFrame scenes j 24p scenes j Scenes saved in MP4 (640k360/30p) ≥ A scene recorded over a long time may take time. ≥ When the following scenes are converted to MP4 scenes and copied, those exceeding 4 GB (approx.) or 30 minutes (approx.) will be automatically divided.
Advanced (Playback) Slow speed conversion You can convert the playback speed of parts recorded in FULL HD Slow Motion Video Mode (l 68, 71) to 1/4 normal speed, and copy them. Once converting scenes recorded in FULL HD Slow Motion Video Mode, you can play them back on another device at 1/4 normal speed. ≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select [ALL MP4/iFrame] or [1080/60p] in [MP4/iFrame]. (l 33) 1 Select the menu.
Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A 1 2 High quality HDMI terminal Video terminal ≥ Use the HDMI micro cable (supplied). ≥ HDMI is the interface for digital devices. If you connect this unit to an HDMI compatible highdefinition TV and then play back the recorded high-definition images, you can enjoy them in high resolution with high quality sound.
2 Select the video input on the TV. ≥ Example: Select the [HDMI] channel with an HDMI micro cable. Select the [Video 2] channel with a Composite video cable. (The name of the channel may differ depending on the connected TV.) ≥ Check the input setting (input switch) and the audio input setting on the TV. (For more information, please read the operating instructions for the TV.) 3 Change the mode to to play back.
∫ To display the on-screen information on the TV [SIMPLE]*3: Information partially displayed When the menu setting is changed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. [DETAIL]: Detailed information displayed [OFF]: Not displayed MENU : [SETUP] # [EXT. DISPLAY] # desired setting *3 This setting is only available in Motion Picture Recording Mode or Still Picture Recording Mode.
Listening in 5.1 channel sound (AVCHD) You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI micro cable. Please read the AV amplifier and TV operating instructions for how to connect this unit to the AV amplifier and TV. ≥ If you connect this unit to a Panasonic AV amplifier that are compatible with VIERA Link, linked operations (VIERA Link) become possible.
3 Operate with the remote control for the TV. ≥ You can select the scene or picture you want to play back by pressing the button up, down, left or right, and then the button in the center. (When selecting scenes) (When playing back) A Display/Cancel operation icons ≥ The following operations are available by pressing the color buttons on the remote control. Green ≥ Switching the number of scenes/still pictures in thumbnail display (9 thumbnails > 20 thumbnails > 9 thumbnails...
Copy/Dubbing Copying/playing back with a USB HDD ≥ In this Owner’s Manual, “USB hard disk drive” is indicated as “USB HDD”. If you connect a USB HDD (commercially-available) to this unit by using a USB Connection Cable (commercially-available), you can copy motion pictures and still pictures recorded on this unit to a USB HDD. It can also play back the scenes and still pictures copied to the USB HDD. ≥ You can copy scenes and still pictures recorded with this unit while maintaining the image quality.
1 (When using a desktop HDD) Connect the AC adaptor (supplied with USB HDD) to the USB HDD. ≥ If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD by USB Connection Cable (commercially-available). 2 Connect the AC adaptor and a sufficiently charged battery to this unit. ≥ If the AC adaptor is not connected to this unit, the USB HDD cannot be used. 3 4 Turn on this unit, and press the recording/playback button to switch this unit to the Playback Mode.
∫ Points to check before copying ≥ When using a USB HDD for the first time, or using a USB HDD that has been used with other devices, first run [FORMAT MEDIA]. ≥ Before copying, go to [MEDIA STATUS] to check the amount of free space on the USB HDD. ≥ In the following cases, copying may take longer: j There are lots of scenes j The temperature of this unit is high ≥ If you copy protected scenes or still pictures, the protection setting of the copied scenes or still pictures are canceled.
Simple copy 1 2 Connect this unit to the USB HDD to prepare for copying. (l 142) Touch [Simple copy]. ≥ When [Copy selected files] or [Playback HDD] is selected, terminate the connection with the USB HDD (l 146), and then perform the operation of Step 1. 3 4 Touch [YES]. Touch [EXIT] when the copy complete message is displayed. ≥ The thumbnail view of the copy destination is indicated. When you stop copying halfway: Touch [CANCEL] while copying.
Playing back the USB HDD ≥ Only motion picture/still picture that have been copied by connecting this unit to the USB HDD or copied with HD Writer AE 5.3 can be played back. A B C 1 USB Connection Cable (commercially-available) USB HDD (commercially-available) Turn the side with the symbol up to connect the micro A end of the USB Connection Cable to the USB terminal of this unit. Connect this unit to the USB HDD to prepare for playback.
≥ It is also possible to switch the media to play back by touching the play mode select icon. When the USB HDD is connected, the (USB HDD) can be selected from the displayed media types. (l 33) ≥ Scenes recorded as Backup for Twin Camera will be saved as normal AVCHD scenes when copied to the USB HDD. ≥ The scenes you have saved in Highlight Playback or 4K Cropping during playback of the USB HDD are saved in the SD card. ≥ Deleting scenes and still pictures on the USB HDD may take time.
Copy/Dubbing Dubbing with a Blu-ray disc recorder, video device, etc. ≥ Blu-ray recorders are not sold in US. ∫ Check before dubbing Check the equipment used for dubbing.
Dubbing in high-definition picture quality ∫ To dub using equipment with an SD card slot You can dub by directly inserting an SD card. ∫ To dub using equipment with a USB terminal You can dub by connecting a USB cable. ≥ Use the AC adaptor to free you from worrying about the battery running down. ≥ Turn on the unit. USB cable (supplied) Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB terminal of this unit. ≥ Insert the plugs as far as they will go.
3 Dubbing through operations on the Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder. About the screen indication of the unit ≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on. ≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing the media, as this may result in the loss of recorded content. ≥ Do not use any other USB cables except the supplied one.
Dubbing in standard picture quality ∫ Dubbing using equipment without an SD card slot or a USB terminal, or using a video device You can dub by connecting a Composite video cable (commercially-available). ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. ≥ The channel set will differ depending on the terminal to which the unit is connected.
Copy/Dubbing Using the Eye-Fi™ card By using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on the card, and save them on a PC or upload them on a file-sharing website via a wireless network. ≥ The functions of the Eye-Fi card (including wireless transmission) are not guaranteed to work on this product. In the case of a malfunction of the card, please contact the card manufacturer.
∫ Using Eye-Fi direct mode The files can be transferred directly from the Eye-Fi card to a smartphone without going through the wireless access point when necessary setting is performed in a PC in advance. ≥ Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-Fi direct mode settings. ≥ Insert an Eye-Fi card (commercially available) to the unit. Select the menu. MENU : [SETUP] # [Eye-Fi DIRECT] ≥ This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].
≥ The Eye-Fi menu only appears when an Eye-Fi card is used. ≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to changes to the card specification etc. ≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-Fi card before use. ≥ When the endless memory function of the Eye-Fi card is set to on, the files transferred from the card may be deleted automatically.
Wi-Fi Wi-Fi® function ∫ Use this unit as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using this unit for any purpose other than as a wireless LAN device.
∫ This unit is WPS-compatible WPS (Wi-Fi Protected Setup™) is a function that allows you to easily set up a connection with a wireless LAN device and make security-related settings. ≥ This unit cannot be used to connect to a public wireless LAN connection. ≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point. ≥ This unit uses the 2.4 GHz frequency band. You cannot establish a wireless LAN connection using the 5 GHz frequency band.
Wi-Fi [Link to Cell] Using a smartphone, you can perform record/playback operations from a remote location or upload motion pictures and still pictures recorded in this unit on SNS (Social Networking Service). Image App Image App A B When connecting directly to a smartphone When connecting to a wireless access point ≥ You need to turn on the Wi-Fi function of your smartphone. ≥ Do not remove the SD card during remote operations. ≥ Refer to [Help] in the “Image App” menu about how to operate.
Preparations before using [Link to Cell] Install the smartphone application “Image App” on your smartphone. (l 183) Setting up a direct Wi-Fi connection between this unit and a smartphone Operate this unit and the smartphone to set up a direct connection. Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (l 195) ≥ The default setting for [Direct Connection Password] is [OFF]. Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi environment.
Using [Link to Cell] with a direct connection When [Direct Connection Password] is set to [OFF] 1 2 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 2/2 Touch [Direct Connection]. ≥ This unit will go into connection standby with the smartphone. ≥ The SSID of this unit is displayed on the screen of this unit. 3 4 Turn on the Wi-Fi function in the smartphone’s setup menu. A B [Wi-Fi Setup] [EXIT] On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit.
When [Direct Connection Password] is set to [ON] ≥ Proceed to Step 5 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi Setup] (l 189). 1 Press Wi-Fi button on this unit and touch [Link to Cell]. ≥ (If you have touched [Link to Cell] for the first time) A message will be displayed asking whether to connect to a wireless access point. Touch [NO].
About [Link to Cell] Screen display during remote operations Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback Mode.
≥ Switching between the Recording Mode: j Intelligent Auto Mode j Slow Zoom Mode* j Manual Mode j 4K Photo Mode j FULL HD Slow Motion Video Mode ([Always]) j Stop Motion Animation Assist Mode ≥ Registering your favorite scenes ≥ Twin Camera* ≥ Changing and adjusting the Sub Window settings* ≥ Backup for Twin Camera ≥ Recording format ≥ Recording mode ≥ Picture size ≥ White Balance ≥ Manual shutter speed/iris adjustment (4K Photo Mode only) ≥ Backlight Compensation ≥ Night Mode ≥ Self-timer ≥ Aspect ratio ≥
Wi-Fi [Baby Monitor] You can use your smartphone to check on your baby being monitored by this unit when you are in another room. The smartphone and this unit can be used like radio transceivers, allowing the users to have a conversation by taking turns. This unit can also send a notification to the smartphone whenever the baby cries. XXXXXXXXX ≥ You need to turn on the Wi-Fi function of your smartphone. ≥ If [CLOCK SET] (l 25) is not set correctly, the sound detection function will not work (l 164).
≥ [Baby Monitor] is not available in the following cases: j When [REC FORMAT] is set to [24p] j When you set [MEDIA, VIDEO/PICTURE] to [2160/24p] or [1080/24p] in Playback Mode Using [Baby Monitor] ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 186 to 189). 1 2 Press Wi-Fi button on this unit. Touch [Baby Monitor] on the Wi-Fi menu screen. ≥ The SSID of the wireless access point to which this unit is connected is displayed.
Changing [Baby Monitor] settings Touch [Setup] on the screen of this unit, and select the item you want to set. ∫ [Notification Setup] This sets whether to send a notification to the smartphone when a sound is detected. [ON]/[OFF] ∫ [Notification Test] This tests if a notification can be sent to the smartphone when a sound is detected. ∫ [Remote Voice Level] This sets the voice message volume. (Volume high)/ (Volume low) ∫ [Sound Detection Sensitivity] This sets the sound detection sensitivity.
Wi-Fi [Home Cam] You can confirm the recording screen of this unit from outside using a smartphone. XXXXXXXXX ≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network such as 3G. ≥ If [CLOCK SET] (l 25) is not set correctly, [Home Cam] cannot be used. ≥ Check your contract details carefully, as smartphone and internet contract details may result in high communication charges being incurred, or a limit placed on communication traffic.
Using [Home Cam] ≥ Perform the home monitoring operation on the smartphone. (l 169) ≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the network settings. When using the home monitor function for the first time ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 186 to 189). 1 2 3 4 Press Wi-Fi button on this unit. Touch [Home Cam] on the Wi-Fi menu screen. Turn off the Wi-Fi setting of the smartphone.
5 Start up the smartphone application “Image App”. ≥ (If the device is Android) When a Wi-Fi connection guidance screen is displayed, select [No]. ≥ (If the device is iOS) If a confirmation message for the Wi-Fi setup is displayed, select [Close]. 6 Enable the home monitoring setting from the menu of the smartphone application “Image App”. ≥ Select [ Monitor]. 7 8 (MENU)] # [Application function] # [Home Monitor], and enable [Use Home Select [Set connect. dest.] of the smartphone.
If you have difficulty establishing a connection with [Home Cam] or the connection is disconnected, wait for a while, and connect again. If the connection still cannot be established, check the settings from the menu of the smartphone application “Image App” below. [ (MENU)] # [Application function] # [Home Monitor] # [Advanced Settings] Refer to [Help] in the “Image App” menu about the settings. ≥ Operation cannot be guaranteed for all devices.
Changing the home monitor settings of this unit ≥ Setting cannot be performed while operating monitoring with a smartphone. Touch [Setup] and select desired setting. ∫ [Home Monitor Connect] You can display the registration screen for a Device ID and Password. ≥ If [QR code] is touched, a QR code will be displayed on the screen of this unit. ∫ [Remote Voice Level] You can set the initial remote voice level and speaker volume level of the remote voice function.
Wi-Fi [DLNA Play] Connecting this unit to a DLNA-compatible device via Wi-Fi, you can playback scenes and still pictures on the DLNA device. A DLNA-compatible device ≥ Please read the operating instructions for the TV about connecting TV to the wireless access point. ≥ Do not remove the SD card in playing back on a TV. Preparations before using [DLNA Play] 1 2 3 Check if the wireless access point is compatible with IEEE802.11b/g/n. Check if the Device is DLNA-compatible.
Playing back on a TV You can play back the scenes and still pictures recorded with or stored in this unit on a TV. ≥ The following scenes can be played back: j Scenes recorded in AVCHD j Scenes recorded as Backup for Twin Camera j Scenes recorded in MP4/iFrame [720] j Scenes saved in MP4 (1280k720/30p) or MP4 (640k360/30p) ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 186 to 189). 1 2 Press Wi-Fi button on this unit.
Wi-Fi [Copy] By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still pictures recorded with this unit to the PC. A PC ≥ If [CLOCK SET] (l 25) is not set correctly, scenes and still pictures may not be able to be copied to a PC. ≥ For information on the connection between a PC and a wireless access point, refer to the operating instruction of the device in use. ≥ If this unit and a PC are not connected to the same wireless access point, copying is not possible.
Creating a shared folder (destination folder) on the PC To copy scenes and still pictures by setting up a Wi-Fi connection between this unit and the PC, complete the following preparations: j Turn on the PC j Create a shared folder (destination folder)*1 *1 The name of the folder must consist of 15 or less alphanumeric characters. ∫ When using HD Writer AE 5.3 1 Install HD Writer AE 5.3.
Copying to a PC ≥ Create a shared folder (destination folder) on the PC. (l 174) ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 186 to 189). 1 2 3 Press Wi-Fi button on this unit. Touch [Copy] on the Wi-Fi menu screen. Touch the PC to be connected. ≥ To search for PCs again, touch [Refresh]. (When the PC you want to connect to is not displayed) 4 Touch [Manual Setting].
If you intend to delete the original scenes or still pictures when the copying has finished, always play back the duplicate scenes or still pictures on PC before deletion to confirm that they have been copied normally. ≥ Copying can be performed even when the battery is used for power, but we recommend that the AC adaptor be used. ≥ Once scenes or still pictures are copied to a PC, the original scenes or still pictures cannot be copied to any PCs.
Wi-Fi [Live Cast] You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” and USTREAM. A You can also broadcast motion pictures live by connecting this unit and a smartphone that supports tethering. ≥ If [CLOCK SET] (l 25) is not set correctly, [Live Cast] cannot be used. ≥ Check your contract details carefully, as smartphone and internet contract details may result in high communication charges being incurred, or a limit placed on communication traffic.
Preparations before using [Live Cast] 1 (When connecting to a wireless access point) Check if the wireless access point is compatible with IEEE802.11b/g/n. (For tethering connection) Check if your smartphone is compatible with the tethering function. ≥ For information on how to set up the tethering function, refer to the operating instructions for your smartphone. 2 Acquire a USTREAM ID/Password/APP. ≥ Acquire a USTREAM ID/Password/APP using a smartphone or a PC.
Broadcasting live ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 186 to 189). 1 2 Press Wi-Fi button on this unit. Touch [Live Cast] on the Wi-Fi menu screen. ≥ If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them according to the screen. ≥ You can register up to three wireless access points.
∫ About the screen indications in the Live Cast Mode / Live broadcast indication Image quality (l 181) 1h23m Elapsed time of the live broadcast 10fps Frame rate (l 181) Number of people watching the live broadcast ≥ Up to 9999 viewers can be indicated. The indication does not appear when the number is 0. E-mail delivery setting Live broadcast microphone setting (l 182) ≥ The indication appears when [Microphone On Air] is set to [OFF]. ≥ Recording is performed in Intelligent Auto Mode.
∫ To configure the e-mail delivery settings You can make the delivery setting of a broadcast notification e-mail and the setting for the scheduled time and date of the broadcast indicated in the e-mail. 1 2 3 Touch [Send E-mail]. Touch [ON] or [OFF]. [ON]: Enables e-mailing. [OFF]: Disables e-mailing. (When [ON] is selected) To set the scheduled broadcast date. [Set to Sending E-mail Time]: [Manual Setting]: Allows you to set the date on which is touched.
∫ To save in USTREAM 1 2 Touch [Save in USTREAM]. Touch [ON] or [OFF]. [ON]: Live motion pictures are saved on USTREAM. [OFF]: Select this option not to save on USTREAM. ∫ To set the image quality of a motion picture you simultaneously broadcast and record 1 2 Touch [REC MODE]. Touch desired recording mode. [PH]/[HA]/[HG]/[HE] ∫ Broadcasting live with no sound 1 2 Touch [Microphone On Air]. Touch [OFF]. [ON]: Sound is output during live broadcasts.
Wi-Fi Install the “Image App” ≥ To use the following Wi-Fi functions, you need to install the smartphone application “Image App”. j [TWIN CAMERA]/[Multi Camera] (l 203) j [Link to Cell] (l 157) j [Baby Monitor] (l 163) j [Home Cam] (l 166) About the “Image App” The “Image App” is an application provided by Panasonic. For Android apps For iOS apps OS Android 4.0 or later* iOS 7.0 or later* Installation procedure 1 1 2 3 4 Connect your Android device to a network. Select “Google Play™ Store”.
Wi-Fi Setting Up a Wi-Fi Connection To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi. ≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ.
Using the [Wi-Fi Setup Wizard] to set up a connection With the smartphone application “Image App”, you can transfer the following information between the smartphone and this unit. ≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON]. (l 195) (The default setting is [OFF].
Connecting to a wireless access point Check if the wireless access point you are using is compatible with WPS j If the wireless access point is compatible with WPS: Proceed to the following [WPS Connection] j If the wireless access point is not compatible with WPS: “Searching for wireless access points to set up a connection” (l 187) [WPS Connection] 1 2 3 4 Press Wi-Fi button on this unit. Touch [Wi-Fi Setup]. Touch [Wireless Settings]. Touch the part with no display of a wireless access point C.
Enter a PIN code to set the Wi-Fi connection 1 Touch [PIN code] in Step 6. 2 Touch the wireless access point to be connected. ≥ If you touch [Refresh], you can search for wireless access points again. ≥ If you touch and select a wireless access point, all characters will be displayed. In this case, touch [ENTER]. 3 Enter the PIN code displayed on this unit screen into the wireless access point. ≥ For further details, please read the operating instructions for the wireless access point.
7 (When there is an Encryption key (Password)) Enter the Password. ≥ For details on how to enter characters, refer to page 116. ≥ When the entry is complete, touch [Enter]. ≥ A message is displayed when the connection is complete. Touch [ENTER], and exit [Wireless Settings].
9 (When selecting [WEP]/[TKIP]/[AES]) Touch [INPUT], then enter the Password. ≥ For details on how to enter characters, refer to page 116. ≥ When the entry is complete, touch [Enter]. ≥ A message is displayed when the connection is complete. Touch [ENTER], and exit [Wireless Settings].
5 6 Turn on the Wi-Fi function in the smartphone’s setup menu. Set the smartphone to WPS Mode. Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen Connecting with QR code 1 2 3 4 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. Touch [Change connection type]. Touch [QR code]. ≥ QR code is displayed on the screen of this unit. 5 6 Start up the smartphone application “Image App”.
Connecting by entering an SSID and Password 1 2 3 4 5 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. Turn on the Wi-Fi function in the smartphone’s setup menu. On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. Enter the Password displayed on this unit’s screen on the smartphone.
If the Wi-Fi connection cannot be established ≥ Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone. Problem It cannot connect to the wireless access point. The wireless access point is not detected. Check points (General) ≥ Turn ON the wireless access point. ≥ Approach the wireless access point and reconnect. ≥ If it takes time to complete the connection, the Wi-Fi connection will be aborted. Reset the connection settings.
Problem Check points The Wi-Fi connection is not possible between this unit and a smartphone. (Wireless Access Point Connection) ≥ Make sure the smartphone is properly connected to the wireless access point by checking the Wi-Fi settings of the smartphone. ≥ Make sure this unit and the smartphone are connected to the same wireless access point. ≥ Make sure the wireless access point is registered in this unit.
Wi-Fi How to Use the [Wi-Fi Setup] Menu Configure various settings necessary to use the Wi-Fi function. When connected to Wi-Fi, the settings cannot be changed. 1 2 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch desired menu item. [Wireless Settings] You can add or delete wireless access points, or rearrange the display order of wireless access points. ≥ Up to 3 wireless access points can be set. ≥ Please refer to page 186 for details about [Wireless Settings].
[Direct Connection Password] [ON]/[OFF] This setting controls whether or not a password is required when you directly connect this unit and a smartphone to start remote operations or to use the Wireless Twin/Multi-Camera function. ≥ If you select [OFF], you can directly connect this unit and a smartphone without entering the password for this unit’s SSID into the smartphone. ≥ If you select [OFF], you cannot set up a connection with [WPS Connection] or [QR code].
[Menu Password] [Setup]/[Delete] This will set/clear the Password to limit the startup of the Wi-Fi setting menu. By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi function by third party, and protect the set personal information. 1 2 Touch [Setup]. Touch [INPUT], and enter the Password (6 characters). ≥ After finish entering the Password, touch [Enter]. ≥ If the Password has already been set, is displayed.
[IP Address/DNS Settings] You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet Mask] and [MAC Address]. [IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address] ≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL], you can set each item. Select the item you want to set, and set it. ≥ [MAC Address] cannot be changed.
Using the “LUMIX CLUB” Acquire a “LUMIX CLUB” Login ID (free). You can upload the scenes and still pictures recorded with this unit to WEB service with [Link to Cell] or use the [Live Cast] function if you register to “LUMIX CLUB”. ≥ You can set the same “LUMIX CLUB” Login ID for this unit and a smartphone. When Login ID is acquired over the smartphone (“Image App”) only, it is possible to register the same Login ID to this unit using the “Image App”.
∫ Register the Login ID of the smartphone (“Image App”) into this unit It is convenient to match the Login IDs for this unit and the smartphone (“Image App”) when using the Wi-Fi function utilizing the “LUMIX CLUB”. 1 2 Connect this unit to the smartphone. From the “Image App” menu, set the common Login ID. ∫ Check the “LUMIX CLUB” terms of use Check the details if the terms of use have been updated. 1 2 3 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [LUMIX CLUB].
Wireless Twin/Multi-Camera Wireless Twin/Multi-Camera function When this unit and one or more smartphones are connected via Wi-Fi, you can display the image transmitted from the smartphone on this unit’s Sub Window and record it simultaneously with the Main Camera’s image.
∫ Wireless Multi-Camera function Connecting multiple smartphones to this unit via Wi-Fi allows you to simultaneously display two Sub Windows and record images in them. Up to three smartphones can be connected simultaneously. (l 207) (For the WXF991 ) ≥ You can also use the Sub Camera of this unit*. * When the LCD monitor is either closed or closed with the screen facing outward, the Sub Camera does not work. Open the LCD monitor.
Notes on the Wireless Twin/Multi-Camera function The performance of the Wireless Twin/Multi-Camera function varies depending on the surrounding radio wave conditions. Since the human body blocks radio waves, it is also influenced by how crowded the area is. ∫ Recording tips ≥ Use your Wireless Sub Camera in a position where as much of it as possible can be seen from the position of this unit. ≥ When the signal between this unit and the Wireless Sub Camera weakens, a warning icon appears.
Wireless Twin/Multi-Camera Using a Smartphone as a Wireless Sub Camera ≥ You need to turn on the Wi-Fi function of your smartphone. ≥ Set [REC FORMAT] to [AVCHD] or [MP4/iFrame]. ≥ Install the smartphone application “Image App” on your smartphone. (l 183) When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function) ≥ (For the WXF991 ) Exit the Twin Camera function. (l 53) ≥ The default setting for [Direct Connection Password] is [OFF].
(When using the recording screen) Touch the recording screen on this unit and touch . 2 Touch [Smartphone] on the screen of this unit. 3 A B C D Turn on the Wi-Fi function in the smartphone’s setup menu. [Wireless Twin Camera] [Smartphone] [Other Camera] [CANCEL] ≥ When [Direct Connection Password] is set to [OFF] Proceed to the “When [Direct Connection Password] is set to [OFF]”.
When [Direct Connection Password] is set to [OFF] 4 On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. ≥ It may take time to complete the Wi-Fi connection. 5 6 When the Wi-Fi connection is complete, press the home button on the smartphone and start up the smartphone application “Image App”. (If this is the first time the smartphone is connecting to this unit) Confirm the message, and touch [YES] on the screen of this unit.
(When using the recording screen) Touch the recording screen on this unit and touch . 2 Touch [Smartphone] on the screen of this unit. 3 4 5 Touch [QR code] on the screen of this unit. Start up the smartphone application “Image App”. A B C D [Wireless Twin Camera] [Smartphone] [Other Camera] [CANCEL] On the smartphone, select [QR code] to scan the QR code displayed on the screen of this unit.
When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function) ≥ The default setting for [Direct Connection Password] is [OFF]. ≥ The QR code is not displayed when [Direct Connection Password] (l 195) is set to [OFF]. Refer to “Selecting this unit’s SSID on the smartphone to set up a connection”. ≥ Up to three smartphones can be connected simultaneously. ≥ You cannot register one smartphone as multiple Wireless Sub Cameras.
When [Direct Connection Password] is set to [OFF] 4 On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. ≥ It may take time to complete the Wi-Fi connection. 5 6 When the Wi-Fi connection is complete, press the home button on the smartphone and start up the smartphone application “Image App”. (If this is the first time the smartphone is connecting to this unit) Confirm the message “Connect this smartphone?”, and touch [YES] on the screen of this unit.
Scanning a QR code to set up a connection ≥ Set [Direct Connection Password] to [ON]. (l 195) 1 2 Press Wi-Fi button on this unit and touch [Multi Camera]. 1/2 A B [Multi Camera] [EXIT] C D E [Unregistered] [Reset] [ENTER] Touch [Unregistered] to register the smartphone to be connected. ≥ Touching [Unregistered] will start a Wi-Fi connection. 3 4 5 Touch [QR code] on the screen of this unit. Start up the smartphone application “Image App”.
≥ You cannot connect devices other than smartphones for the Wireless Multi-Camera function. ≥ Changing the [Direct Connection Password] setting clears registered smartphones. ≥ When you have made a connection with [Direct Connection Password] set to [ON], connect the second and subsequent smartphones with the same setting. The smartphones can be connected even if different connection methods, [Wi-Fi] and [QR code], are used for them. ≥ The following operation allows you to register up to ten smartphones.
≥ This unit and the smartphone will be connected via Wi-Fi. When the connection to this unit is complete, the image being captured by the smartphone will be displayed on the Sub Window of this unit. ≥ If the connection cannot be established or no image appears on the Sub Window, follow the steps below to set up the connection again: 1 Touch the screen of this unit and touch . 2 Touch [Change Device] on the screen of this unit.
Wireless Twin/Multi-Camera Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera) ≥ (For the WXF991 ) The Sub Camera of this unit is not available for the Wireless Twin Camera function. ≥ An image recorded with the Main Camera and the Wireless Sub Camera’s image displayed on the Sub Window are recorded as a single scene or still picture*. When you play back such a scene or still picture, it is not possible to delete only the Sub Window image or hide it.
When the Wi-Fi signal weakens If the signal weakens when the Sub Window is displayed, the connection status icon changes to / (Weak) and / flashes on the Sub Window. If the signal weakens further, the connection status icon changes to / and the Sub Window image disappears.
∫ Displaying or hiding the Sub Window Touch . ≥ Each time you touch the icon, you can display or hide the Sub Window. ≥ When the Sub Window is hidden, the Sub Window will not be recorded. ∫ Sub Window size when using a Wireless Twin/Multi-Camera The size of the image displayed on the Sub Window varies depending on the smartphone camera and the orientation of the smartphone.
Changing the Wireless Twin Camera settings Changing the display position of the Sub Window 1 2 Touch Sub Window. Touch the display position you want to change. ≥ Depending on the display position of the Sub Window, the positions of the icons displayed on the screen may change. Changing the color of the Sub Window frame 1 2 Touch Sub Window. Touch . 3 Touch , and select the desired frame.
Changing the Wireless Multi-Camera settings Changing the display position of the Sub Window 1 Touch Sub Window to be changed. ≥ The selected Sub Window will be highlighted in yellow. 2 Touch the display position you want to change. ≥ Depending on the display position of the Sub Window, the positions of the icons displayed on the screen may change. ≥ You cannot move a Sub Window to the display positions for the other Sub Window.
Switching the image in the Sub Window 1 Touch Sub Window to be switched. ≥ The selected Sub Window will be highlighted in yellow. ≥ The Sub Camera select icons will be displayed and the selected icon will be highlighted in yellow. 2 Touch the desired icon to switch the image in the Sub Window. : Displays the image from the Sub Camera of this unit ( WXF991 ). : Displays the image from Wireless Sub Camera 1. : Displays the image from Wireless Sub Camera 2. : Displays the image from Wireless Sub Camera 3.
Swapping the images between the Sub Windows 1 Touch Sub Window to be swapped. ≥ The selected Sub Window will be highlighted in yellow. ≥ The Sub Camera select icons will be displayed and the selected icon will be highlighted in yellow. 2 Touch the icon selected for the other Sub Window. ≥ The Sub Window images will be swapped. ≥ It takes some time until the Sub Window appears. ≥ You cannot set this unit to Playback Mode when it is connected to a Wireless Sub Camera.
≥ Recording menu items, operation icons, and functions such as Image Stabilizer, Level Shot Function and [QUICK POWER ON] work only for the Main Camera. ≥ The Fade function’s image effects do not affect the Sub Window. ≥ When the “Image App” screen disappears, image transmission to the Sub Window stops. (The Wi-Fi connection stays connected.) This may occur when, for example, the smartphone receives a call or you press the home button.
Wireless Twin/Multi-Camera If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera) ≥ For information on the setup of your smartphone, refer to its operating instructions. Problem Cannot connect this unit to the smartphone. No image on the Sub Window. The Sub Window image is interrupted. The Sub Window image disappears.
With a PC What you can do with a PC HD Writer AE 5.3 You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, DVD discs or SD cards using HD Writer AE 5.3. Check the website below to download/install the software. ≥ The software is available for download until the end of March 2019. http://panasonic.jp/support/global/cs/soft/download/f_ae53.html ≥ Refer to the operating instructions of HD Writer AE 5.3 (PDF file) for details on how to use it.
What can be done with the HD Writer AE 5.3 Data type Online sharing: You can upload motion pictures on the Internet and share them with your family and friends. Motion picture Playing back on a PC: Play back the motion picture and still picture data in high-definition picture quality on a PC. Motion picture and still picture Formatting discs: Depending on the type of disc that you use, formatting is necessary.
Before Installing HD Writer AE 5.3 Your installation or use of the Software defined below shall be conclusively deemed to constitute your acceptance of the terms of this Agreement. If you do not accept the terms of this Agreement, do not install, nor use the Software. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5 produced by Microsoft Corporation (1) Licensee shall use the MICROSOFT SQL SERVER COMPACT 3.5 only when included in the Software, and shall not use the MICROSOFT SQL SERVER COMPACT 3.5 in any other configuration or method. Licensee shall not publish the MICROSOFT SQL SERVER COMPACT 3.5 or work around any technical limitations in the MICROSOFT SQL SERVER COMPACT 3.5.
With a PC Operating environment ≥ Even if the system requirements mentioned in this owner’s manual is fulfilled, some PCs cannot be used. ≥ Even if the system requirements are fulfilled, it may take some time to edit 4K motion pictures and it may not be possible to play them back smoothly. ≥ A compatible Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/ DVD. ≥ Operation is not guaranteed in the following cases.
Display High Color (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1920k1080 pixels or more recommended) DirectX 9.0c compatible video card (DirectX 10 recommended) Compatible with DirectDraw overlay PCI Express™k16 compatible recommended Video memory of 256 MB or more recommended ≥ A video card compatible with hardware decoding of 4K motion pictures is required when using playback function for 4K motion pictures.
∫ To use the HD Writer AE 5.3 You will need a high performance PC depending on the functions to be used. It may not properly play back or properly operate depending on the environment of the PC used. Refer to the operating environment and notes. ≥ Operation during the playback may become slow if the CPU or memory is not fulfilling the requirements of the operating environment. ≥ Always use the most current driver for the video card. ≥ Always make sure there is enough capacity on the HDD in the PC.
With a PC Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed. ≥ Explanation of operations is based on Windows 7. ∫ Installing HD Writer AE 5.
With a PC Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. USB cable (supplied) Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB terminal of this unit. ≥ Insert the plugs as far as they will go. A B 1 Connect this unit to the AC adaptor. ≥ Use the AC adaptor to free you from worrying about the battery running down. 2 3 Turn on the unit. Connect this unit to a PC. ≥ The USB function selection screen will appear.
∫ To disconnect USB cable safely Select the icon in task tray displayed on the PC, and then select the model number of this unit to disconnect the USB cable. ≥ Depending on your PC’s settings, this icon may not be displayed. About the screen indication of the unit ≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen.
About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. We recommend using HD Writer AE 5.3 to copy motion picture data. Using Windows Explorer or other programs on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 5.3. It is impossible to write data to SD card on this unit from a PC.
With a PC Starting HD Writer AE 5.3 ≥ To use the software, log on as an Administrator or as user name for standard user account. The software cannot be used with the user name for a guest account. (On the PC) Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 5.3] # [HD Writer AE 5.3]. ≥ For details on how to use the software applications, read the PDF operating instructions of the software.
With a PC If using Mac (mass storage) ≥ HD Writer AE 5.3 is not compatible with Mac. ≥ iMovie and Final Cut Pro X supported. For details about iMovie and Final Cut Pro X, please contact Apple Inc. ∫ Operating environment PC Mac OS OS X v10.11 CPU Intel Core 2 Duo or better RAM 2 GB or more Interface USB port Other requirements Mouse or equivalent pointing device ≥ Even if the system requirements mentioned in this owner’s manual is fulfilled, some computers cannot be used.
Others Indications *1 For WXF991 only For VX981 only *2 ∫ Recording indications Motion Picture Recording Mode 0h00m00s Still Picture Recording Mode 1h30m R 1h20m PRE-REC 1h30m R 3000 25.
/ / / / White Balance (l 74) 25.9M / 14M / 2.1M / 20.4M / 10.9M / 0.3M / 20M / 10.6M / 2M Number of recording pixels for still pictures (l 31, 101, 104) In Playback Mode, the picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above. 1/100 Shutter Speed (l 75) OPEN/F2.
∫ Playback indications 1/;/5/ /6/ D/E/;1/2; Scene(s) recorded with 4K Photo mode (l 71) /7/8/9/:/ Miniature-recorded scene (l 63) MINI Display during playback (l 34, 103) 0h00m00s Playback Time (l 34) No.
∫ Confirmatory indications –– (Time display) The built-in battery is low. (l 25) Warning for recording of yourself (l 26) SD card is not inserted or is incompatible.
Others Messages Major confirmation/error messages to be indicated on the screen in text. CHECK CARD. This card is not compatible or it cannot be recognized by the unit. If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again. THIS BATTERY CANNOT BE USED. ≥ Use a battery that is compatible with this unit.
About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) ≥ is displayed when abnormal management information is detected when the scenes are displayed in thumbnail. Use a sufficiently charged battery or the AC adaptor. Depending on the condition of the data, it may not be possible to completely repair the data.
Others Troubleshooting ∫ It is not a malfunction in following cases A clicking sound is heard when the unit is shaken. ≥ This is the sound of the lens moving and is not a defect. This sound will no longer be heard when the unit is turned on and set this unit to the Motion Picture Recording Mode or Still Picture Recording Mode. Object seems to be warped. ≥ Object seems to be warped slightly when the object moves across the image very fast, but this is because the unit is using MOS for the image sensor.
Indication Problem Remaining battery indication is not displayed properly. Check points ≥ The remaining battery capacity indication is an approximation. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. Recording Problem Check points The unit arbitrarily stops recording. ≥ Use an SD card that can be used for motion picture recording.
Playback Problem Check points Scenes/still pictures cannot be played back. ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be played back. Scenes cannot be deleted. ≥ Release the protect setting. (l 133) ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data.
With other products Problem Cannot copy scenes on the SD card by connecting to other equipment with the USB cable. Check points ≥ Other equipment might have not recognized the SD card. Unplug the USB cable once, and reconnect it. With a PC Problem Check points When connected by the USB cable, this unit is not detected by the PC. ≥ After re-inserting the SD card into the unit, reconnect the supplied USB cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment.
About the Wi-Fi function Problem Check points Cannot use [DLNA Play]. ≥ Make sure the television is compatible with DLNA. Read the instructions for the television you are using. ≥ Make sure the wireless access point and this device are properly connected. ≥ Approach the wireless access point and reconnect. ≥ If a connection cannot be made between this device and a DLNA-compatible device, try to reconnect and make sure they connect properly. The live broadcast screen will not be displayed.
∫ If AVCHD scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable.
Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. ≥ Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls.
Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second): ≥ The battery is not charged. Remove the battery from the unit, and try charging again. ≥ Check that the terminals of the unit or battery are not dirty or covered with a foreign object, and connect the battery correctly once again. If a foreign object or dirt is present, turn off the unit before removing. ≥ The battery or environment is at an extremely high or low temperature.
About personal information When a name or birthday is set by Baby Calendar, personal information will be included in this unit. When the Wi-Fi function is used, the SSID, Password, and other personal information will be included in this unit. Setting a Wi-Fi password is recommended to protect personal information.
Others About copyright ∫ Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ≥ Manufactured under license from Dolby Laboratories.
Others Recording modes/approximate recordable time ≥ The stated times are the approximate recordable times for continuous recording.
≥ Use time in the row of 4 GB in above table as a guideline for the time that can be copied onto one DVD disc (4.7 GB). ≥ Recordable times will be approximately half the times in the above table when Backup for Twin Camera is in operation. ≥ The maximum remaining recordable time that can be displayed for motion picture recording is 99 hours and 59 minutes. Any remaining recordable time exceeding 99 hours and 59 minutes will be displayed as “R99h59m+”.
(Motion picture recording mode) Recording format [4K MP4] 20.4M 6016k3384 Picture size Aspect ratio SD card 14M 4992k2808 2.1M 1920k1080 [16:9] 4 GB 300 750 450 3200 16 GB 1300 3000 1900 12500 64 GB 5000 12000 7500 52000 Recording format Recording mode [24p] [2160/24p] 20.4M 6016k3384 Picture size [1080/24p] 8.3M 3840k2160 Aspect ratio SD card [MP4/iFrame], [AVCHD] 8.3M 3840k2160 14M 4992k2808 2.
Others Optional accessories Some optional accessories may not be available in some countries. Attaching the Conversion Lens/ Filter Kit Attaching the supplied shoe adaptor [VX981] Attach the Wide Conversion Lens (VW-W4907H: optional) ND filter or MC protector of the Filter Kit (VW-LF49N: optional) in front of the lens. ≥ You will not be able to use the video light. Set the [VIDEO LIGHT] setting and the [AF ASSIST LAMP] setting to [OFF].
About the Remote Pan Tilt Cradle If you connect this unit to the Remote Pan Tilt Cradle VW-CTR1 (optional) by USB cable, this unit can automatically track the movement of the subject being recorded. This unit zooms in/out the image automatically, and the Remote Pan Tilt Cradle pans and tilts this unit. Using Wi-Fi functions in combination with the Remote Pan Tilt Cradle The Remote Pan Tilt Cradle can also be used by the following Wi-Fi functions.
5 Touch [Remote Pan Tilt Cradle]. ≥ The Remote Pan Tilt Cradle Mode selection screen is displayed. ≥ If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle is not recognized correctly, reconnect the USB cable. ≥ If you turn off and on this unit with the USB cable connected, this unit may operate in the previous Remote Pan Tilt Cradle Mode. 6 Install the Remote Pan Tilt Cradle so that its home position will face the front of the subject.
Using the Remote Pan Tilt Cradle ≥ Connecting the Remote Pan Tilt Cradle to this unit. (l 255) ≥ Set [Panning Angle]/[Tilt Angle]/[Tilt Speed] in advance. (l 260) 1 Touch the desired Remote Pan Tilt Cradle Mode. Operation of the Remote Pan Tilt Cradle Mode [Party Scene] The operation is automatic. ≥ The Remote Pan Tilt Cradle works within the recording range set in [Panning Angle]/[Tilt Angle].
3 Press the recording start/stop button. (When [Party Scene]/[Moving Object] is selected) ≥ Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It takes time until recording starts. ≥ The Remote Pan Tilt Cradle operates within the range set in advance. (When [Manual]/[Preset Positions] is selected) ≥ Performing the operation of Step 2 during recording may cause the recording screen to shake or the Remote Pan Tilt Cradle to move from its original location.
Touch . ≥ The Remote Pan Tilt Cradle moves to the next position at approximately 5 second intervals. ≥ If you touch [Stop] while the Remote Pan Tilt Cradle is moving, it will stop midway. Cyclic Mode will be deactivated. ≥ If you touch [Pause] and touch another position button, Cyclic Mode will be deactivated. The Remote Pan Tilt Cradle will move to the position of the position button you have touched. ≥ In Cyclic Mode, turns of the position buttons without a registered position will be skipped.
(About [Party Scene]/[Moving Object]) ≥ Still pictures cannot be recorded during Motion picture recording. ≥ Depending on recording conditions, the color tone of the image being recorded may change or subjects may not be recorded automatically in cases such as the following: j The subject is too large or too small j The background and the subject are similar in color j The recording location is dark j Bright light is detected (sky, TV, lamp, etc.
[Tilt Speed] [High]/[Normal] Set the up/down operation speed of the Remote Pan Tilt Cradle. [Pan/Tilt Check] You can confirm the operating range of the Remote Pan Tilt Cradle set for [Party Scene]/[Moving Object]. ≥ The Remote Pan Tilt Cradle moves in the ranges set at [Panning Angle] and [Tilt Angle]. ≥ When the confirmation operation is finished, the Remote Pan Tilt Cradle returns to its home position. [Firmware Version Info] The firmware version of the Remote Pan Tilt Cradle is displayed.
Panasonic Corporation Web site: http://www.panasonic.