Operating Instructions

- 129 -
1 Connect this unit to a TV.
≥ Check that the plugs are inserted as far as they go.
≥ Do not use any other HDMI micro cable except the supplied one.
2 Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with a HDMI micro cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3 Change the mode to to play back.
≥ When this unit and the TV are connected with the HDMI micro cable (supplied) or an AV cable
(commercially-available) in any of the following situations, no image will be displayed on the TV.
Use the LCD monitor of this unit.
j When recording a motion picture in HDR Movie Mode or during PRE-REC
j When [HDMI RESOLUTION] is set to [576p] in HDR Movie Mode
j FULL HD Slow Motion Video Mode
j series/ series/ series
When recording a motion picture with [Backup for Twin Camera] set to [ON] or during
PRE-REC
A HDMI micro cable (supplied)
≥ Be sure to connect to the HDMI
terminal. (Insert the connector
with the arrow side facing
down.)
≥ Connecting with a HDMI micro
cable (l 131)
≥ Listening in 5.1 channel sound
(AVCHD) (l 131)
≥ Playback using VIERA Link
(l 132)
B AV cable (commercially-
available)
Picture quality
1 series/
series
To play back images
recorded in 4K or high
definition picture quality,
connect this unit to the HDMI
terminal of the TV.
series/
High-definition images when
connecting to HDMI terminal
2 Standard images when
connecting to video terminal
A/V
WX970
VX870
V770
V760
WX970
VX870
V770