Operating Instructions

- 171 -
By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still
pictures recorded with this unit to the PC.
A PC
Preparations before using [Copy]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the PC and the wireless access point are connected via Wi-Fi.
≥ You can also use a LAN cable to connect the PC and the wireless access point.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [Easy Connection (WPS)] (l 185)
≥ Searching for wireless access points to set up a connection (l 186)
≥ Setting up a connection manually (l 187)
When the Wi-Fi connection is complete, proceed to “Copying to a PC”. (l 173)
≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 183)
Wi-Fi [WX970] series/[VX870] series/[V770] series
[Copy]
≥ For information on the connection between a PC and a wireless access point, refer to
the operating instruction of the device in use.
≥ If this unit and a PC are not connected to the same wireless access point, copying is
not possible.