Operating Instructions
- 173 -
Copying to a PC
≥ Create a shared folder (destination folder) on the PC. (l 172)
1 Press Wi-Fi button on this unit and touch [Copy].
2 Touch the PC to be connected.
≥ To search for PCs again, touch [Refresh].
(When the PC you want to connect to is not displayed)
Touch [Set Manually].
3 (When [Set Manually] is touched)
Enter the computer name of the PC (NetBIOS name for Mac computers).
≥ Enter the computer name of your PC (NetBIOS name for Mac computers).
(A maximum of 15 characters can be entered.)
≥ When the computer name (or NetBIOS name) contains a space (blank character), etc., it may not
be recognised correctly. If a connection attempt fails, we recommend that you change the
computer name (or NetBIOS name) to the one consisting of only alphanumeric characters, with a
maximum of 15 characters.
≥ Input method is same operation as for setting up the title. (l 106)
≥ After entering the computer name of the PC, touch [Enter].
4 Touch [INPUT], and enter the name of the shared folder.
≥ If you have created a shared folder (destination folder) using HD Writer AE 5.2 (l 172), touch
[NEXT].
≥ Enter the name of the shared folder you have created on your PC, and touch [Enter].
(A maximum of 15 characters can be entered.)
≥ If a screen asking you to enter a user account and password is displayed after you have entered
the name of the shared folder, enter the one you have created on your PC.
/////
≥ When the connection to the PC is complete, copying starts.
≥ When copying is complete, this unit turns off automatically.
5 //
Select the copy source media ([Built-inMemory]/[SD CARD]).
≥ When the connection to the PC is complete, copying starts.
≥ When copying is complete, this unit turns off automatically.
When you stop copying halfway
Touch [CANCEL] while copying.
WX970
WX979
VX870
VX878
V770 V777
WX970M
VX870M
V770MV770M