Operating Instructions

17
(ENG) DVQX1453
You can turn the unit on and off using the power button or by opening and closing the LCD monitor.
Open the LCD monitor and press the power button to turn on the unit.
A The status indicator lights on.
The unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
≥ (For the series/ series)
j You can also turn the unit on and off using the viewfinder.
j The unit will not turn off unless the LCD monitor is closed and the viewfinder is retracted.
j When the viewfinder is extended, opening the LCD monitor turns off the viewfinder and turns
on the LCD monitor.
The viewfinder may turn on depending on the settings for the [LCD/EVF CHANGE] in the Fn
button function. For information about the Fn button functions, refer to the Operating Instruction
(PDF format).
∫ Overheat detection
When the internal temperature of the unit rises during use, a message will be displayed. When this
happens, the unit will turn off automatically a few minutes later.
≥ Wait until the temperature has dropped before resuming use.
If you try to use the Wi-Fi function while the internal temperature of this unit is high, a message will
be displayed. When this happens, the Wi-Fi function is disabled.
≥ Wait until the temperature has dropped before resuming use.
Preparation
Turning the unit on/off
Turning the unit on and off with the power button
To turn off the unit
Hold down the power button until the status
indicator goes off.

WXF1
VXF1
HC-WXF1-VXF1-VX1-V800EBEP-DVQX1453_eng.book 17 ページ ２０１８年１月１８日 木曜日 午後９時３分