Operating Instructions

20
DVQX1453 (ENG)
To display the recording mode switching icon
Display of the recording mode switching icon will disappear when no touch operation is performed
for a specific period of time. To display it again, touch the screen.
≥ The recording mode selector button and the recording mode switching icon are disabled when
the Wireless Multi-Camera function is enabled.
≥ If the recording start/stop button is pressed in Still Picture Recording Mode or Playback Mode,
this unit will be switched to Motion Picture Recording Mode. During motion picture/still picture
playback or in other conditions, even if the recording start/stop button is pressed, the recording
mode may not be switched.
≥ When you switch between Motion Picture Recording Mode, 4K Photo Mode
*
and Still Picture
Recording Mode, settings used in the original recording mode may not be maintained. (l 23)
≥ You cannot switch to Still Picture Recording Mode when [REC FORMAT] is set to [24p].
* For the series/ series/ series
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
∫ Touch
Touch and release the touch screen to select icon or picture.
≥ Touch the centre of the icon.
≥ Touching the touch screen will not operate while you are
touching another part of the touch screen.
∫ Slide while touching
Move your finger while pressing on the touch screen.
∫ About the operation icons
///:
Touch when changing a page or performing settings.
:
Touch to return to the previous screen.
≥ (For the series/ series)
When the viewfinder is in use, on-screen icons will be displayed but disabled.
Open the LCD monitor to touch them.
Preparation
LCD monitor/viewfinder
WXF1
VXF1
VX1
WXF1
VXF1
HC-WXF1-VXF1-VX1-V800EBEP-DVQX1453_eng.book 20 ページ ２０１８年１月１８日 木曜日 午後９時３分