Operating Instructions

Table Of Contents
- 105 -
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
The size of pictures to be recorded is determined by their scene type.
Press the button fully at the location to be saved as a still picture during
playback.
It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
Date the motion picture was recorded will be registered as date of the still picture.
Quality will be different from the normal still picture.
Highlight & Time Frame Index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be played
back from any midway point of the scene you wish to see.
Operate the zoom lever to side and change over the
thumbnail display to Highlight & Time Frame Index. (l 36)
1 Touch .
To display the next (previous) page:
j Slide the thumbnail display upward (downward) while touching
it.
j Touch (up) / (down) on the thumbnail scroll lever. (l 35)
2 Touch the desired search condition.
* It cannot be set while playing back 4K MP4 scenes, MP4/iFrame scenes, 24p scenes or scenes
recorded as Backup for Twin Camera.
When select [FACE], it will select the portion for which Face Recognition was performed from the
scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select
[HIGHLIGHT].
Scene type Picture size
4K MP4 scenes
Scene(s) recorded in the recording mode [2160/24p]
(3840k2160)
Scenes recorded in the recording format [MP4/iFrame]
AVCHD scenes
Scene(s) recorded in the recording mode [1080/24p]
Scenes recorded as Backup for Twin Camera
Scenes saved in MP4 (1920k1080/25p)
Scenes saved in MP4 (1280k720/25p)
(1920k1080)
Scenes saved in MP4 (640k360/25p) (640k360)
[3 SEC.]/[6 SEC.]/[12 SEC.]/[MINUTES]/[FACE]
*
/[HIGHLIGHT]
*
8.3M
2.1M
0.2M