Operating Instructions
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 131 -
Deleting part of a scene (AVCHD/Backup for Twin
Camera)
Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be
deleted.
The deleted scenes cannot be restored.
≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select
scenes recorded as [AVCHD] or Backup for Twin Camera. (l 34)
1 Select the menu.
2 Touch the scene with a part to delete.
3 Set the section to delete by touching and sliding
the top and bottom section selection buttons .
≥ It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 104)
4 Touch [ENTER].
5 Confirm (play back) the scene after editing by touching [YES].
≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.
6 Stop the playback.
≥ A confirmation message appears.
7 Touch [ENTER].
≥ Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
≥ Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when the middle part of a scene is deleted.
≥ (For the / )
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining. (l 138)
: [EDIT SCENE] # [SECTION DELETE]
MENU
0h00m15s
0h00m15s
0h00m15s
WXF990M
VX980M