Operating Instructions
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 215 -
≥ You cannot connect devices other than smartphones for the Wireless Multi-Camera function.
≥ Changing the [Direct Connection Password] setting clears registered smartphones.
≥ When you have made a connection with [Direct Connection Password] set to [ON], connect the
second and subsequent smartphones with the same setting. The smartphones can be connected
even if different connection methods, [Wi-Fi] and [QR code], are used for them.
≥ The following operation allows you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted. (Smartphones
may become unregistered when you use the Wireless Multi-Camera function.)
j
Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone directly.
≥
You can also switch the image in the Sub Window. Refer to “Switching the image in the Sub Window” on page 222.
When connecting for the second time or later
1
Touch the recording screen on this unit and touch .
2
Start up the smartphone application “Image App”.
≥
This unit and the smartphone will be connected via Wi-Fi. When the
connection to this unit is complete, the image being captured by the
smartphone will be displayed on the Sub Window of this unit.
≥ If the connection cannot be established or no image appears
on the Sub Window, follow the steps below to set up the connection again:
1 Close the smartphone application “Image App”.
2 Touch the recording screen of this unit again and touch .
3 Touch [Change Device] on the screen of this unit.
After completing the steps above, follow the procedure from Step 2 onwards in “Selecting this unit’s
SSID on the smartphone to set up a connection” in “When connecting a smartphone to this unit as a
Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)”. (l 208)
≥
[History] allows you to set up a Wi-Fi connection with the Wi-Fi function settings you have used before. (
l
196)
To use the last connected smartphones
3
Start up the smartphone application “Image App”.
To use the Wireless Twin Camera function
To use the Wireless Multi-Camera function
1 Press Wi-Fi button on this unit and touch
[Multi Camera].
2
Touch [ENTER].
1/2
A [Multi Camera]
B [EXIT]