Operating Instructions
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 216 -
≥
This unit and the smartphone will be connected via Wi-Fi. When the connection to this unit is complete,
the image being captured by the smartphone will be displayed on the Sub Window of this unit.
≥ If the connection cannot be established or no image appears on the Sub Window, follow the steps
below to set up the connection again:
1 Touch the screen of this unit and touch .
2 Touch [Change Device] on the screen of this unit.
3
Close the smartphone application “Image App”, and then touch [Reset] on the device registration screen.
4 Touch [YES].
After completing the steps above, follow the procedure from Step 2 onwards in “Selecting this unit’s
SSID on the smartphone to set up a connection” in “When connecting a smartphone to this unit as a
Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)”. (l 212)
To replace the registered smartphones
To clear all of the registered smartphones
Close the smartphone application “Image App”, and then touch [Reset] on the device
registration screen.
≥ A message will be displayed. Touching [YES] will clear all the registered information, and device
names will be indicated as [Unregistered].
≥
Wi-Fi connections made with the Wireless Multi-Camera function are not saved as records in [History].
Terminating the connection
1 Touch the recording screen on this unit and
touch .
2 Touch [EXIT] on the screen of this unit.
≥ The Wi-Fi connection will be terminated.
≥ Close the “Image App” on the smartphone.
≥ You can also terminate the connection by pressing the Wi-Fi button on this unit.
If you press the Wi-Fi button during recording pause, a message will be displayed. To terminate
the connection, touch [YES].
1 Press Wi-Fi button on this unit and touch
[Multi Camera].
2 Touch the name of the registered device you
want to replace.
≥ Close the smartphone application “Image App”, and then
follow the procedure from Step 3 on page 212.
≥ To set up a connection by scanning a QR code, follow
the procedure from Step 3 on page
214.
≥
When the connection to this unit is complete, the device
name will be changed to that of the newly-registered device.
C [Reset]
D [ENTER]