Operating Instructions

Table Of Contents
- 29 -
1 Open the LCD monitor or extend the
viewfinder to switch to Motion
Picture Recording Mode. (
l 21)
2 Press the recording start/stop button
to start recording.
A Recording button icon
B When you begin recording, ; changes to ¥.
3 Press the recording start/stop button again to pause recording.
Recording can also be started/stopped by touching the recording button icon.
Screen indications in the Motion Picture Recording Mode
Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen. (l 39)
It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
If the recording/playback button is pressed during motion picture recording, the recording
will stop and this unit will be switched to Playback Mode.
To change the recording format, change the
[REC FORMAT] or [REC MODE]. (l 91)
Still pictures can be recorded while recording the motion picture. (l 32)
The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
If the file size or recording time of a scene recorded with [REC FORMAT] set to [4K MP4], [MP4/
iFrame] or [24p] exceeds any of the values below, the scene will be divided automatically.
(Recording will continue.)
j When using an SD Memory Card/SDHC Memory Card: Approximately 4 GB or 30 minutes
j When using the built-in memory*/an SDXC Memory Card:
Varies depending on the setting of [REC FORMAT] and [REC MODE].
Basic
Recording motion pictures
Recording mode
R 1h20m
Approximate remaining recordable time
When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
“h” is an abbreviation for hour, “m” for
minute and “s” for second.
Each time the unit is put into recording
pause, the counter display will be
reset to 0h00m00s.
T
W
0h00m00s
0h00m00s
0h00m00s
R 1h20m
R 1h20m
R 1h20m
ヮヱフ
ビヒプパ