Operating Instructions
Table Of Contents
- Read this first
- Contents
- Preparation
- Basic
- Advanced (Recording)
- Advanced (Playback)
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi-Camera)
- With a PC
- Others
- 92 -
≥ When [REC FORMAT] is set to [AVCHD]
A Favours image quality
B Favours Recording time
≥ When [REC FORMAT] is set to [24p]
*1 [1080/50M]/[1080/28M] and [720] are recording modes suitable for playing back or editing on a
PC.
*2 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.
*3 You can record motion pictures in 1080/50p (1920k1080/50 progressive), the best AVCHD
picture quality for this unit.
≥ Please refer to page 13 for details about recordable time using the battery.
≥ Use an SD card conforming to Class 10 of the SD Speed Class Rating when you want to
record motion pictures to the SD card using the setting [1080/50M].
≥ Please refer to page 256 for details about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,
mosaic-type noise may appear at playback.
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC FORMAT] to [AVCHD]. (l 91)
≥ Insert an SD card.
≥ is displayed on the screen. will disappear when space in the built-in memory is gone
and the recording to the SD card starts.
≥ Relay Recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (l 138, 144)
≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by touching
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
≥ Still pictures are recorded to the SD card after Relay Recording.
≥ is displayed on the thumbnail display during the playback of the scene that was relay-
recorded on the built-in memory.
[PH]/[HA]/[HG]/[HE]:
(AB)
Set the recording format to 1080/50i.
[1080/50p]
*3
: Set the recording format to 1080/50p.
[2160/24p]: Set the recording format to 2160/24p (72 Mbps).
[1080/24p]: Set the recording format to 1080/24p (50 Mbps).
/
[RELAY REC]
: [RECORD SETUP] # [RELAY REC] # [ON]
WXF990M
VX980M
MENU