Operating Instructions

- 175 -
≥ When connecting by [Set Manually], confirm the SSID (Identification name), Authentication
method, Encryption type, and Encryption key (Password) of the wireless access point you are
using.
1 Press Wi-Fi button.
≥ When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], and
proceed to step 5.
2 Touch [Wi-Fi Setup].
3 Touch [Set Wireless Access Point].
4 Touch the part with no display of a wireless
access point.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 182.
5 Touch [Set Manually].
6 Touch [INPUT], then enter the SSID of the
wireless access point to be connected.
≥ For details on how to enter characters, refer to page 98.
≥ When the entry is complete, touch [Enter].
7 Touch the desired Network Authentication method.
≥ When [WEP] is selected, proceed according to step 9.
8 Touch the desired Encryption method.
≥ If you select [NONE], a message is displayed after completing the connection.
9 (When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥ For details on how to enter characters, refer to page 98.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
Setting up a connection manually
Network authentication type Encryption types that can be set
[Open] [NONE]/[WEP]
[WEP] There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]


A [Delete]
B [EXIT]