Operating Instructions

- 89 -
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
For scenes recorded in AVCHD or MP4/iFrame, still pictures in (1920k1080) are recorded,
and for scenes saved in MP4 (Low Quality), still pictures in (640k360) are recorded.
Press the button fully at the location to be saved as a still picture during
playback.
≥ It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
≥ Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Playback operation Playback display Operating steps
Frame-by-frame
Playback
During Pause
With the playback paused, touch .
(Touch to advance the frames one at a
time in the reverse direction.)
≥ Normal playback is restored when you touch
.
≥ When the frames are advanced one at a
time in the reverse direction, they will be
shown in intervals of 0.5 seconds.
≥ Frame-by-frame Playback of scenes
recorded in MP4 [1080/50M], [1080/28M] or
[720] will be shown in intervals of
0.5 second.
≥ Frame-by-frame Playback of iFrame scenes
and scenes saved in MP4 (Low Quality) will
be shown in intervals of 1 second.
≥ Frame-by-frame Playback of parts recorded
as FULL HD Slow Motion Video will be
shown at the intervals of 0.25 second.
Direct playback
During Playback
Touch the direct playback bar or slide it
while touching.
≥ The playback pauses temporarily and skips
to the position touched or slid to while
touching.
≥ Playback will start by releasing your touching
or sliding finger.
2.1M
0.2M