Operating Instructions

- 120 -

Dividing a scene (AVCHD/Backup for Twin Camera)

series/ series/ series

It is possible to divide an AVCHD scene or a scene recorded as Backup for Twin Camera.

Any unwanted parts in the scene can be deleted after dividing.

≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch

the play mode select icon. Then select an AVCHD scene or a scene recorded as Backup for

Twin Camera. (l 29)

It is possible to divide an AVCHD scene.

Any unwanted parts in the scene can be deleted after dividing.

≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch

the play mode select icon. Then, select the AVCHD scene. (l 29)

1 Select the menu.

2 Touch and play back the scene you want to divide.

≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback. (l 95, 96)

3 Touch to set the dividing point.

≥ Touch [YES].

≥ Touch [YES] to continue dividing the same scene. To continue

dividing other scenes, touch [NO] and repeat Steps 2-3.

4 Touch [Return] to complete dividing.

≥ Unwanted parts can be deleted. (l 117)

To delete all the divided points

≥ The scenes that were deleted after division cannot be recovered.

≥ You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes.

≥ It may not be possible to divide scenes with a short recording time.

≥ Data that has been recorded or edited on another device cannot be divided and the divided points

cannot be deleted.

: [EDIT SCENE] # [DIVIDE] # [SET]

: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]

WX970

VX870

V770

V760

0h01m30s0h01m30s0h01m30s