Operating Instructions

- 162 -

You can confirm the recording screen of this unit from outside using a smartphone.

Preparations before using [Hom.Monitor]

1 Check if the wireless access point is compatible with IEEE802.11b/g/n.

2 Install the smartphone application “Image App” on your smartphone. (

l 181)

3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-

compatible), or iOS device.

≥ If your smartphone is NFC-compatible, the NFC mark will be displayed when starting up the

“Image App”.

4 Set up a Wi-Fi connection between this unit and the wireless access point.

≥ [Easy Connection (WPS)] (l 185)

≥ Searching for wireless access points to set up a connection (l 186)

≥ Setting up a connection manually (l 187)

When the Wi-Fi connection is complete, proceed to “Using [Hom.Monitor]”.

≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the

smartphone application “Image App”. (l 183)

Wi-Fi [WX970] series/[VX870] series/[V770] series

[Hom.Monitor]

≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network such

as 3G.

≥ If [CLOCK SET] (l 21) is not set correctly, [Hom.Monitor] cannot be used.

≥ Check your contract details carefully, as smartphone and internet contract details may

result in high communication charges being incurred, or a limit placed on

communication traffic.

Caution:

This function is not designed for anti-theft or disaster use.

Image App

XXXXXXXXX