Operating Instructions

- 139 -
Manual Edit
You can join desired AVCHD scenes, scenes recorded as Backup for Twin Camera or parts of these
scenes in the order they were recorded to play back or save as a single scene with music added.
≥ Touch [AVCHD] in the motion picture/still picture tab (l 38)
1 Select the menu.
2 Touch [1080/50p] or [1080/50i].
≥ Touch [Enter].
≥ Thumbnails are displayed by each scene.
3 Select the scene or part of the scene to play back, and set the music.
≥ To select a scene (l 140)
≥ To select part of a scene (l 140)
≥ To set the music (l 141)
≥ Touching [Return] after selecting a scene may cancel the selected scene.
4 Touch [Enter].
5 Touch [YES], and select the playback operation for the edited scene. (l 39)
≥ In the following cases, the screen for selecting [PREVIEW], [SAVE] (l 142), [SELECT AGAIN],
and [EXIT] is displayed. Touch the desired item.
j Touch [NO]
j Playback finishes
j Stop playback
≥ You can also select combinations of scenes and parts of scenes.
≥ You can select up to 99 scenes. (Each 3 second thumbnail of part of a scene is treated as a
single scene.)
≥ You can create a combined scene of up to about 6 hours long.
≥ Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not
possible.
≥ (For the //////)
When saving a manually edited scene, check the free space on the SD card.
(For the )
When saving a manually edited scene, check the free space on the built-in memory.
Before selecting the scene, check the table below and create sufficient free space for saving it.
: [EDIT SCENE] # [MANUAL EDIT]
MENU
WXF1
VXF1
VXF11
VX1
VX11
V800
V808
WXF1M
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 139 ページ ２０１８年２月２２日 木曜日 午後１２時３０分