Operating Instructions

Table Of Contents
- 151 -
Deleting part of a scene
(AVCHD/Backup for Twin Camera)
Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be
deleted.
The deleted scenes cannot be restored.
Touch [AVCHD] in the motion picture/still picture tab (l 38)
1 Select the menu.
2 Touch the scene with a part to delete.
3 Set the section to delete by touching and sliding
the top and bottom section selection buttons .
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 120)
4 Touch [ENTER].
5 Confirm (play back) the scene after editing by touching [YES].
A confirmation message appears when [NO] is touched. Proceed to Step 7.
6 Stop the playback.
A confirmation message appears.
7 Touch [ENTER].
Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
It may not be possible to delete part of a scene with a short recording time.
The scene will be divided into two scenes when the middle part of a scene is deleted.
(For the )
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining. (l 158)
: [EDIT SCENE] # [SECTION DELETE]
MENU
0h00m15s
0h00m15s
0h00m15s
WXF1M
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 151 ページ 2018年2月22日 木曜日 午後12時30分