Operating Instructions
Table Of Contents
- Read this first
- Preparation
- Basic
- Advanced (Recording)
- Using the zoom
- HDR Movie Mode
- Recording with the Sub Camera (Twin Camera) [WXF1] series
- Recording with the Backup for Twin Camera Function
- Changing the Recording Mode
- Manual recording
- Recording with the Touch Function
- Recording functions of operation icons
- Recording functions of menus
- Using the Fn buttons [WXF1] series/[VXF1] series
- Advanced (Playback)
- Playback Operations
- Various playback functions
- Playing back motion pictures/still pictures by date
- 4K Cropping [WXF1] series/[VXF1] series/[VX1] series
- Highlight Playback
- Manual Edit
- Baby Calendar
- Tagging Favorite Scene[WXF1] series/[VXF1] series/[VX1] series
- Changing the playback settings and playing back the slide show
- Playing back still pictures recorded in Stop Motion Animation Assist Mode as a slide show
- Deleting scenes/still pictures
- Convert to MP4
- Slow speed conversion
- Relay scene combining [WXF1M]
- Watching Video/Pictures on your TV
- Playback using VIERA Link
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi- Camera)
- With a PC
- Others
- 171 -
≥ When using an Eye-Fi card (commercially-available), set [Eye-Fi TRANSFER] to [OFF]. (l 177)
When the item is set to [ON], even if you connect the USB HDD to this unit, it will not recognise
the USB HDD.
∫ Points to check before copying
≥ When using a USB HDD for the first time, or using a USB HDD that has been used with
other devices, first run [FORMAT MEDIA].
≥ Before copying, go to [MEDIA STATUS] to check the amount of free space on the USB HDD.
≥ In the following cases, copying may take longer:
j There are lots of scenes
j The temperature of this unit is high
≥ If you copy protected scenes or still pictures, the protection setting of the copied scenes or still
pictures are cancelled.
≥ The order in which the scenes were copied cannot be changed.
∫ Formatting
This is for initialising the USB HDD.
≥ Please be aware that if a media is formatted then all the data recorded on the media is
erased and cannot be recovered. Back up important data on a PC etc.
≥ Connect this unit to the USB HDD and touch [Playback HDD].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Connect this unit and the USB HDD to format.
You may no longer be able to use the USB HDD if you format them on another device such as a
PC etc.
≥ This unit formats the USB HDD in exFAT.
∫ Displaying media information
The used space of the USB HDD can be checked.
≥ Connect this unit to the USB HDD and touch [Playback HDD].
≥ (For the //////)
If you touch [CHANGE MEDIA], you can switch the display between the SD card and USB HDD.
(For the )
If you touch [CHANGE MEDIA], you can switch the display between the SD card, built-in memory,
and USB HDD.
When the USB HDD is connected to other devices such as Blu-ray disc recorder, a
message prompting to format the USB HDD may display. All the scenes and still pictures
recorded on the USB HDD will be erased if formatted. Do not format as important data will
get erased and it will be impossible to restore.
Before you delete the data on the media after copying is complete, be sure to play back
the USB HDD to check that they have been copied to correctly. (l 173)
: [SETUP] # [FORMAT MEDIA] # [HDD]
: [SETUP] # [MEDIA STATUS]
MENU
MENU
WXF1
VXF1
VXF11
VX1
VX11
V800
V808
WXF1M
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 171 ページ 2018年2月22日 木曜日 午後12時30分