Operating Instructions
Table Of Contents
- Read this first
- Preparation
- Basic
- Advanced (Recording)
- Using the zoom
- HDR Movie Mode
- Recording with the Sub Camera (Twin Camera) [WXF1] series
- Recording with the Backup for Twin Camera Function
- Changing the Recording Mode
- Manual recording
- Recording with the Touch Function
- Recording functions of operation icons
- Recording functions of menus
- Using the Fn buttons [WXF1] series/[VXF1] series
- Advanced (Playback)
- Playback Operations
- Various playback functions
- Playing back motion pictures/still pictures by date
- 4K Cropping [WXF1] series/[VXF1] series/[VX1] series
- Highlight Playback
- Manual Edit
- Baby Calendar
- Tagging Favorite Scene[WXF1] series/[VXF1] series/[VX1] series
- Changing the playback settings and playing back the slide show
- Playing back still pictures recorded in Stop Motion Animation Assist Mode as a slide show
- Deleting scenes/still pictures
- Convert to MP4
- Slow speed conversion
- Relay scene combining [WXF1M]
- Watching Video/Pictures on your TV
- Playback using VIERA Link
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi- Camera)
- With a PC
- Others
- 213 -
Enter a PIN code to set the Wi-Fi connection
1 Touch [PIN code] in Step 6.
2 Touch the wireless access point to be connected.
≥ If you touch [Refresh], you can search for wireless access points again.
≥ If you touch and select a wireless access point, all characters will be displayed. In this
case, touch [OK].
3 Enter the PIN code displayed on this unit screen into the wireless access
point.
≥ For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
4 Touch [NEXT].
≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set Wireless
Access Point].
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
≥ Confirm Encryption key (Password) of the selected wireless access point if the network
authentication is encrypted.
1 Press Wi-Fi button on this unit.
2 Touch [Wi-Fi Setup].
3 Touch [Set Wireless Access Point].
≥ If you touch and select a wireless access point, all characters will be displayed. In this
case, touch [OK].
≥ When no wireless access points are displayed, refer to “Setting up a connection manually”.
(l 214)
≥ If an Encryption key (Password) is not set, the connection is complete and a message is
displayed. Touch [EXIT], and exit [Set Wireless Access Point].
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
Searching for wireless access points to set up a connection
4 Touch the part with no display of a wireless
access point C.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 220.
5 Touch [Search].
6 Touch the wireless access point to connect.
≥ If you touch [Refresh], you can search for wireless access
points again.
A [Delete]
B [EXIT]
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 213 ページ 2018年2月22日 木曜日 午後12時30分