Operating Instructions
Table Of Contents
- Read this first
- Preparation
- Basic
- Advanced (Recording)
- Using the zoom
- HDR Movie Mode
- Recording with the Sub Camera (Twin Camera) [WXF1] series
- Recording with the Backup for Twin Camera Function
- Changing the Recording Mode
- Manual recording
- Recording with the Touch Function
- Recording functions of operation icons
- Recording functions of menus
- Using the Fn buttons [WXF1] series/[VXF1] series
- Advanced (Playback)
- Playback Operations
- Various playback functions
- Playing back motion pictures/still pictures by date
- 4K Cropping [WXF1] series/[VXF1] series/[VX1] series
- Highlight Playback
- Manual Edit
- Baby Calendar
- Tagging Favorite Scene[WXF1] series/[VXF1] series/[VX1] series
- Changing the playback settings and playing back the slide show
- Playing back still pictures recorded in Stop Motion Animation Assist Mode as a slide show
- Deleting scenes/still pictures
- Convert to MP4
- Slow speed conversion
- Relay scene combining [WXF1M]
- Watching Video/Pictures on your TV
- Playback using VIERA Link
- Copy/Dubbing
- Wi-Fi
- Wireless Twin/Multi-Camera
- Wireless Twin/Multi-Camera function
- Using a Smartphone as a Wireless Sub Camera
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function)
- When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)
- When connecting for the second time or later
- Terminating the connection
- Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera)
- If the Wi-Fi connection cannot be established (Wireless Twin/Multi- Camera)
- With a PC
- Others
- 223 -
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet
Mask] and [MAC Address].
≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],
you can set each item. Select the item you want to set, and set it.
≥ [MAC Address] cannot be changed.
You can test the connection between this unit and the wireless access point. The following
connections can be verified:
j Connection to the wireless access point
j Connection to “LUMIX CLUB”
j Connection to USTREAM
j Connection to the home monitor server
1 Touch [NEXT].
≥ The connection test starts.
2 Check the connection test result, and touch [EXIT].
≥ If the connection is successful, “±” is displayed. If the connection is not successful, “t” is
displayed.
≥ To test the connection to “LUMIX CLUB” or USTREAM, you need to make other settings in
advance. (l 204)
You can change the workgroup setting.
≥ When copying scenes or still pictures to a PC using a Wi-Fi function [Copy], you need to create a
shared folder on the PC and connect this unit to the workgroup to which the PC belongs.
(The default setting is [WORKGROUP].)
≥ For information on how to create a shared folder, refer to page 200.
≥ For details on how to enter characters, refer to page 137.
≥ A maximum of 15 characters can be entered.
[Wireless LAN setup]
[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]
[Connection Test]
[PC Connect Setup]
[Change]/[Return to default]
[Change]: Enter the name of the workgroup to which the destination PC belongs.
[Return to default]: This will set to the condition at the time of purchase.
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 223 ページ 2018年2月22日 木曜日 午後12時30分