Operating Instructions

Table Of Contents
- 76 -
AF/AE tracking or digital zoom is not available.
PRE-REC will be cancelled.
You cannot operate Slow Zoom or adjust the zoom speed when using manual settings. (l 80)
You cannot perform zoom operations with the following during Slow Zoom.
j Zoom lever and zoom button icons
j (For the series/ series)
Manual ring
On the thumbnail screen in Playback Mode, scenes recorded with Slow Zoom Mode are
displayed with the indication.
Please note that this indication is not displayed for relay-recorded
*
scenes.
* For the only
Adjust while moving the recording position backward or forward.
Performing Auto Zoom while adjusting the position of this unit allows you to create a Dolly
Zoom effect.
If you have touched , record the subject while moving away from it; if you have touched
, record the subject while moving closer to it.
Adjust the position of this unit so that the subject fits into the centre frame.
Dolly Zoom Mode
1 Touch [OK].
2 Align the subject’s position with the centre
frame B.
The face detection frame A will be displayed around the
subject’s face.
Adjust so that the face detection frame and centre frame
appear in the same size. When they appear in the same
size, the colour of the centre frame changes from red to
green.
3 Start recording.
The image will be recorded in quick motion.
4 Touch the Auto Zoom button icon C ( / )
to start Auto Zoom.
The lens will be zoomed at a constant speed to the tele
or wide end.
If you touch the same Auto Zoom button icon again
during Auto Zoom, the operation will stop.
If you touch the other Auto Zoom button icon during Auto
Zoom, Auto Zoom will start in the opposite direction.
5 Adjust the position of this unit while keeping
the subject’s size constant.
A The face detection frame
B The subject’s position with
the centre frame
C The Auto Zoom button icon
WXF1
VXF1
WXF1M
AUTO
AUTO
T
AUTO
AUTO
AUTO

AUTO
AUTO
AUTO
AUTO
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 76 ページ 018年2月22日 木曜日 午後12時30分