Operating Instructions

Table Of Contents
- 85 -
Iris adjustment
Adjust it when the screen is too bright or too dark.
When using series/ series
1 Press the camera function button to change the manual ring setting to [IRIS].
(
l 80)
2 Press the AUTO/MANUAL button to change to manual iris.
The aperture (OPEN, F2.0, etc.) and gain (0dB, etc.) are displayed on the screen.
3 Rotate the Manual ring to adjust.
When using series/ series
Switch to Manual Mode. (l 81)
1 Touch [IRIS].
2 Touch / to adjust settings.
Touch [IRIS] to end the adjustment.
: Iris/Gain value:
CLOSE
!#
(F16 to F2.0)
!#
OPEN
!#
(0dB to 18dB)
Value closer to CLOSE darken the image.
Value closer to 18dB brighten the image.
When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
To return to auto setting, change the Recording Mode to the Intelligent Auto Mode. (l 64)
(For the series/ series)
When setting both the shutter speed and the iris/gain value, set the shutter speed and then set
the iris/gain value.
If the gain value is increased, the noise on the screen increases.
Depending on the zoom magnification, there are iris values that are not displayed.
When turned in direction A:
When turned in direction B:
Brightness increased
Brightness decreased
WXF1
A
B
VX1
V800
IRIS
VX1
V800
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 85 ページ 018年2月22日 木曜日 午後12時30分