Operating Instructions

- 97 -
(For the series/ series)
You can record images even in very low light situations (minimum required illumination:
approx. 0.5 lx) or in the dark.
Each time the icon is selected, the indication changes by one setting in the following order:
([COLOUR]) # ([Infrared]) # [OFF]
≥ When [ (Night Mode)] is to be set in an Fn button with the [FN BUTTON SETTING], the
setting changes each time you press the Fn button.
≥ When [REC MODE] is set to [24p], ([COLOUR]) is not displayed.
≥ (For the series)
When a sub window is being displayed during recording with the Twin Camera function,
([Infrared]) is not displayed.
∫ To set ON/OFF of the infrared light for ([Infrared])
≥ When is displayed after you set the item to [ON], you can record images in the dark.
≥ When you are in a dim place or in other situations where it is difficult to focus with Auto Focus, set
the item to [OFF].
≥ If you turn off and on this unit and select ([Infrared]), [INFRARED LIGHT] will be set to [ON].
(For the series/ series)
This function allows you to record colour images in very low light situations. (Minimum
required illumination: approx. 0.5 lx)
It will switch every time the icon is touched.
([COLOUR]) # [OFF]
≥ Using a tripod is recommended.
≥ In darker areas, Auto Focus may focus a bit slower. This is normal.
≥ (For the series/ series)
The Night Mode setting cannot be changed while Slow Zoom is working. (l 75)
Night Mode ([COLOUR])
≥ Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
Night Mode
([COLOUR]): Allows you to record colour images in very low light situations.
([Infrared]): Allows you to record images in the dark.
OFF: Cancel the setting.
: [RECORD SETUP] # [INFRARED LIGHT] # [ON] or [OFF]
WXF1
VXF1
WXF1
MENU
VX1
V800
WXF1
VXF1
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 97 ページ ２０１８年２月２２日 木曜日 午後１２時３０分