Operating Instructions

- 154 -
You can check if the image is level while recording motion pictures and still pictures. The function
can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥ The setting changes as follows when using Focus Assist. (l 40)
j The guidelines are not displayed. (these are displayed on the TV when this unit is connected to
TV.)
j The setting cannot be changed.
Display of the range that can be displayed with the common
household TV (safety zone A) can be switched.
≥ The safety zone is not displayed on the images that is
actually recorded.
Displays/hides the centre marker.
Selects the operation of the Recording Counter during recording. (l 60)
The information displayed on the screen (operation icon and counter display etc.) can be displayed/
not displayed on the TV. (l 92)
It is possible to change the date and time display mode.
[GUIDE LINES]
///[OFF]
[SAFETY ZONE]
[16:9 90%]/[4:3]/[14:9]/[1.85:1]/[17:9]/[2:1]/[2.35:1]/
[2.39:1]/[OFF]
[CENTER MARKER]
[ON]/[OFF]
[REC COUNTER]
[TOTAL]/[SCENE]
[VIDEO OUT OSD]
[ON]/[OFF]
[DATE/TIME]
[OFF]/[TIME]/[DATE]/[DATE&TIME]

(When [16:9 90%] is set)