Operating Instructions

- 159 -
The ring LED lights up blue in Recording Mode.
≥ When [5 SEC.] is set, the ring LED lights up for 5 seconds after the unit is turned on or the
Recording Mode is switched.
≥ When [RING LED (RED)] is set to [ON], the ring LED does not light up blue during recording.
The ring LED lights up red during recording.
≥ When the [REC LAMP] is set to [OFF], this item cannot be set.
Set date and time. (l 27)
Set the time difference from Greenwich Mean Time. (l 27)
Set the system frequency of this unit. Change the setting when creating a motion picture that has a
broadcasting system different from that of your region.
≥ After you have changed the system frequency, this unit will be restarted.
≥ By default, the system frequency is set to the broadcasting system of the region where this
product was purchased.
≥ This function’s default setting is [50Hz(PAL)].
≥ When [SYSTEM FREQ] is set to a broadcasting system different from that of your region,
images may not be played back correctly on the TV.
≥ If you are not familiar with broadcasting systems, we recommend that you use the default
setting.
≥ When recording with [REC MODE] set to [AVCHD], you cannot record scenes of different system
frequencies into a single SD card. Use a different SD card for each system frequency.
[RING LED (BLUE)]
[ON]/[5 SEC.]/[OFF]
[RING LED (RED)]
[ON]/[OFF]
[CLOCK SET]
[TIME ZONE]
[SYSTEM FREQ]
[59.94Hz(NTSC)]: System frequency for regions where the TV broadcasting system is
NTSC
[50Hz(PAL)]: System frequency for regions where the TV broadcasting system is PAL