Operating Instructions

- 52 -
≥ You may see a band of light around an object that is shining very bright, or highly reflective.
≥ During normal playback, image movement may not look smooth.
≥ If you record an extremely bright object or record under indoor lighting, colour and screen
brightness may change or a horizontal line may appear on the screen. In such cases, change
settings as follows:
j Set this unit to Intelligent Auto Mode.
j Adjust the shutter speed to 1/50, 1/60 or 1/100.
j Adjust the Synchro Scan setting
≥ In Auto Iris Mode or Auto
Gain Mode, the screen brightness may not change even if you adjust
the shutter speed. (l 48, 49)
If you press the multi-function dial when the shutter speed is displayed as a decimal number, the
Synchro Scan setting will be displayed. You can fine-adjust the shutter speed by adjusting the
Synchro Scan setting.
1 Press the SHUTTER button
2 When the shutter is displayed as a decimal number (e.g.,
1/60.0), press the multi-function dial.
≥ The display on the screen will switch from [ SHUTTER] to
[ SYNCHRO], and the Synchro Scan setting will be displayed.
3 Adjust the Synchro Scan setting by rotating the multi-function dial.
≥ You can adjust the setting faster by rotating the multi-function dial while pushing and holding it.
≥ To minimise flickering and horizontal bands, look at the screen while adjusting the shutter speed.
4 Push the multi-function dial to set.
Shutter speed range for the Synchro Scan setting
The shutter speed range varies depending on the frame rate in [REC FORMAT]. (l 139)
* Except for when [REC FORMAT] is set to [C4K/24p 100M].
Making adjustments with Synchro Scan
Frame rates in [REC FORMAT] Shutter speed
50p/50i 1/50.0 to 1/250.0
25p 1/25.0 to 1/250.0
60p/60i 1/60.0 to 1/249.8
30p 1/30.0 to 1/249.8
24p
*
1/24.0 to 1/249.8
[C4K/24p 100M] 1/24.0 to 1/250.0