Operating Instructions

Chapter 5 Shooting — Adjustable settings when shooting
- 107 -
AE level (exposure compensation)
Adjusting with the rear ring
1 Select the [SCENE FILE] menu → [AE LEVEL] → [ON].
2 Select the [CAMERA] menu → [SW MODE] → [REAR RING] → [IRIS/AE LEVEL].
3 When the <AUTO/MANU> switch is set to manual mode, use one of the following operations to switch one of iris, gain, or shutter
speed to auto.
≥ Press the <IRIS> button to switch to auto iris mode.
≥ Press the <GAIN> button to switch to auto gain mode.
≥ Press the <SHUTTER> button to switch to auto shutter mode.
4 Rotate the rear ring.
At this time, the settings in [SCENE FILE] menu → [AE LEVEL EFFECT] are not reflected.
@
NOTE
0 When manual iris mode is enabled, the iris is adjusted when the rear ring is turned.
Setting with the multi manual function
1 Select the [SCENE FILE] menu → [AE LEVEL] → [ON].
2 Select the [CAMERA] menu → [SW MODE] → [REAR RING] → [ZOOM] or [IRIS].
3 Switch one of iris, gain, or shutter speed to auto.
4 Turn the multidial to display [ AE LEVEL].
5 Press the multidial.
The AE level display is highlighted in orange.
6 Turn the multidial to adjust, then press the multidial.
The setting changes to the value displayed and exits.
Press the <EXIT> button to exit without changing the setting.
Applications for the USER button
You can also either press the USER button assigned to [AE LEVEL] or touch the USER button icon to switch enable/disable of [AE LEVEL].
≥ [AE LEVEL] is set in the <AE LEVEL>/<USER4> button at the time of purchase.
≥ Refer to page 47 for USER button settings.
@
NOTE
0 AE level adjustments are not possible when IR recording is enabled.
A Exposure compensation value
B AE LEVEL
AE LEVEL
+1.0EV

