Operating Instructions
Chapter 5 Shooting — Audio input
- 123 -
Using audio equipment/external microphone (XLR, 3-pin)
1
Attach the handle unit to the unit.
2
Connect an audio device or an external microphone to the <INPUT 1>/<INPUT 2> terminal.
3
Switch the connected audio input with the <INPUT1>/<INPUT2> switch.
*1 Factory setting: [
j
50dB]
*2 Factory setting: [0dB]
@
NOTE
0 When using a Unidirectional microphone AG-MC200G (optional), set [INPUT1 MIC LEVEL]/[INPUT2 MIC LEVEL] to [j50dB].
0 When the handle unit is detached, audio input switches to the built-in microphone/external microphone (stereo mini jack).
0 After detaching the external microphone (XLR, 3-pin), switch the CH1 SELECT/CH2 SELECT switch to <INT/MIC (L)> or <INT/MIC (R)> to set the input
signal to the built-in microphone. No audio will be recorded if you continue to record as is.
¥When connecting equipment that does not support i48 V power supply, set the <INPUT1>/<INPUT2> switch to <LINE> or <MIC>. If set to
<i48V>, this unit or the connected equipment may malfunction.
0 If an abnormality occurs with the i48 V power supply, the power of this unit will turn off.
0 Using a phantom microphone shortens the battery time.
0 When noise from unconnected terminals is bothersome, set the <INPUT1>/<INPUT2> switch to <LINE>.
Adjusting the audio recording level
There are manual adjustment and automatic adjustment as the adjustment method of the audio recording level.
≥ Audio channel can be individually set.
A
<INPUT1> switch
B
<INPUT2> switch
Connected device <INPUT1>/<INPUT2> switch setting
Menu settings (you can set each channel individually)
[INPUT1 MIC LEVEL]/
[INPUT2 MIC LEVEL]
*1
[INPUT1 LINE LEVEL]/
[INPUT2 LINE LEVEL]
*2
Audio device <LINE> Disabled [4dB], [0dB]
External microphone <MIC> [
j
40dB], [
j
50dB], [
j
60dB] Disabled
External microphone (with power
supply)
<
i
48V> [
j
40dB], [
j
50dB], [
j
60dB] Disabled
A
<CH1> switch
B
<CH2> switch
C
<AUDIO LEVEL CH1> dial
D
<AUDIO LEVEL CH2> dial