Operating Instructions

Chapter 5 Shooting — Convenient shooting functions
- 131 -
Convenient shooting functions
Zebra patterns display
The unit can display 2 types of zebra patterns to the output image from the LCD monitor.
1 Select the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [ZEBRA] → [ON].
≥ You can also either press the USER button assigned to [ZEBRA] or touch the USER button icon to display the zebra pattern and switch display/
hide. This changes depending on the [ZEBRA] settings.
Setting the detection level
1 Set each item in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
∫ Display area of the zebra pattern
The display area of the zebra pattern varies depending on the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] setting.
@
NOTE
0 The zebra pattern cannot be recorded.
0 To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra pattern is no longer displayed.
(l 105, 106, 109)
Displaying the marker
Displaying the center marker
A center marker can be displayed.
1 Select the type of the center marker in the [VIDEO OUT/LCD/VF] menu → [MARKER] → [CENTER MARKER].
≥ The center marker is not displayed when [OFF] is selected.
[ZEBRA] settings Operation when the USER button is pressed
[MOMENT] Displays the zebra pattern for approximately 5 seconds.
[ON], [OFF] Switches display/hide of the zebra pattern.
Item Description of settings
[ZEBRA1 DETECT] Sets the detection level of zebra pattern 1.
[50%]…[105%]
[ZEBRA2 DETECT] Sets the detection level of zebra pattern 2.
[50%]…[105%]
[ZEBRA2] Switches enable/disable of zebra pattern 2.
[ON], [OFF]
A [ZEBRA2]
B [ZEBRA2 DETECT]
C [ZEBRA1 DETECT]
1 [ON]
2 [OFF]
[1] [2] [3] [4]
[105%]
[0%]



