Operating Instructions

Chapter 7 Output and Screen Display — Screen status display
- 162 -
Mode check display
The unit’s settings and status can be displayed on the viewfinder or LCD monitor screen for check.
Press the <DISP/MODE CHK> button for 1 second or more while displaying the camera image screen to display the STATUS screen of the mode check.
Each time you press the <DISP/MODE CHK> button, the display switches in the order STATUS screen, FUNCTION screen, AUDIO screen, SWITCH
screen, NETWORK screen, camera image screen.
Each screen of the mode check is displayed for approximately 5 seconds.
The screen does not switch while the <DISP/MODE CHK> button is pressed.
Press the <EXIT> button while each screen is displayed to return to the camera image screen.
@
NOTE
0 The mode check screen cannot be displayed even when you press the <DISP/MODE CHK> button in the following case:
j When the [VIDEO OUT/LCD/VF] menu → [LCD] → [SELF SHOOT] → [MIRROR] is set and the LCD monitor is rotated toward the lens (when mirror
shooting)
FUNCTION screen
Displays the video output settings and information of the recording media.
*1 Displayed when using .
41 Waveform monitor
ll ——
42 IR recording
l — l —
43 Digital zoom
l — l —
44 Focus
l — l —
45 Audio monitor volume adjustment
llll
Item Description
[SDI OUT]
*1
[VIDEO OUT FORMAT] Displays with [1920 × 1080p]/[1920 × 1080i]/[1920 × 1080PsF]/[1280 × 720p] the
signals output through the <SDI OUT> terminal.
[VIDEO OUT CHAR] Displays with [ON]/[OFF] whether the characters output through the <SDI OUT>
terminal are superimposed.
[HDMI OUT] [VIDEO OUT FORMAT] Displays with [3840
× 2160p]/[3840 × 2160p(420/8bit)]/[1920 × 1080p]/
[1920
× 1080i]/[1280 × 720p]/[720 × 480p]/[720 × 576p] the signals output through
the <HDMI> terminal.
[VIDEO OUT CHAR] Displays with [ON]/[OFF] whether the characters output through the <HDMI>
terminal are superimposed.
[CARD STATUS] — Displays the status, remaining recording capacity, and the total capacity of the
memory card inserted in the card slot.
The status of the memory card that is displayed are following types.
≥ [NO CARD]: Memory card is not inserted.
≥ [UNSUPPORTED]: Memory card is not supported.
≥ [FORMAT ERROR]: Memory card cannot be used. (Format error)
≥ [PROTECTED]: It is write protected. (The write-protection switch of the
memory card is set to the LOCK side)
≥ [NO REMAIN]: There is no remaining recording capacity.
≥ [NOT SDXC]: SDXC memory card is not inserted in the MOV recording/MP4
recording.
≥ Cases other than above: The remaining recording capacity is displayed in 0%
through 100%.
[TOTAL] Displays the remaining recording capacity/total capacity of the memory cards in
the card slot 1 and the card slot 2.
[SLOT1] Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 1.
[SLOT2] Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 2.
No Item
Camera image
screen
When the <DISP/
MODE CHK> button
is pressed
STATUS Playback screen
X2000