Operating Instructions
Chapter 7 Output and Screen Display — Screen status display
- 163 -
AUDIO screen
Displays the audio input/output settings and the audio level meter.
SWITCH screen
Displays the values assigned to the USER switch, super gain, and white balance.
NETWORK screen
Displays the settings of the network function.
Item Description
[HANDLE] [HANDLE STATUS] Displays with [ATTACHED]/[DETACHED] whether the handle unit (
supplied, optional) is attached.
[AUDIO] [SOURCE] [CH1] to [CH2] Displays the audio recorded to each channel.
≥
When the handle unit is attached
j
[CH1]: [INT(L)]/[MIC(L)]/[INPUT1(MIC)]/[INPUT1(LINE)]/
[INPUT1(MIC
i
48V)]
j
[CH2]: [INT(R)]/[MIC(R)]/[INPUT1(MIC)]/[INPUT1(LINE)]/
[INPUT1(MIC
i
48V)]/[INPUT2(MIC)]/[INPUT2(LINE)]/[INPUT2(MIC
i
48V)]
≥
When the handle unit has not been attached
j
[CH1]: [INT(L)]/[MIC(L)]
j
[CH2]: [INT(R)]/[MIC(R)]
[LEVEL] [CH1] to [CH2] Displays the adjustment method of the recording level of the audio for each
channel with [AUTO]/[MANU].
[LIMITER] [CH1] to [CH2] Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when the adjustment method of the recording level of the audio is
set to [AUTO].
[LOWCUT] [CH1] to [CH2] Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
Audio lebel meter Enlarges the display of the audio level meter displayed on the camera image
screen.
[AUDIO OUT] Displays with [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX] the audio channel
format output from the headphone jack and the built-in speaker.
Item Description
[USER SW] [1] to [5] Displays the function assigned to <USER1> through <USER5> buttons.
[OTHER ASSIGN] [S.GAIN] Displays the list of gain values assigned as a super gain.
[WHITE BAL A] Displays the setting status of the [Ach] of the white balance as either [OK] or
[NG].
Displays [ATW] when the auto tracking white balance function is assigned.
[WHITE BAL B] Displays the setting status of the [Bch] of the white balance as either [OK] or
[NG].
Displays [ATW] when the auto tracking white balance function is assigned.
[WHITE BAL PRST] Displays the color temperature assigned to the “preset” of white balance.
Displays [ATW] when the auto tracking white balance function is assigned.
Color temperature and [VAR] are displayed when “VAR” is assigned.
Item Description
[NETWORK] [DEVICE SEL] Displays the device used for network connection in [WLAN] (wireless LAN)/
[OFF].
[NETWORK FUNC] Displays the network function of the unit with [STREAMING]/[OFF].
[STRM FORMAT] Displays the streaming format.
It is not displayed when set to the [NETWORK] menu
→
[NETWORK FUNC]
→
[OFF].
[IP REMOTE] Displays enable/disable of the IP remote function with [ENABLE]/[DISABLE].
[IPv4 ADDRESS] Displays the IP address of IPv4.
It is not displayed when set to the [NETWORK] menu
→
[DEVICE SEL]
→
[OFF].
X2000
X1500