Operating Instructions

Chapter 2 Description of Parts — Main unit
- 20 -
42 Status indicator (l 34)
Illuminates when power is on.
43 Battery release lever (l 25)
Used when removing the battery from the main unit.
44 Battery mounting section (l 25)
Attaches a battery.
45 Viewfinder (l 51)
46 REC button (on the grip) (l 101)
Starts or stops the recording.
It is possible to directly record from the thumbnail mode.
47 <HDMI> terminal (l 166)
A terminal to output video signal by connecting a monitor, etc.
48 Headphones terminal
Connects audio monitoring headphones.
49 Charging lamp (l 26)
Illuminates when the battery is charging.
50 <DC IN 12V> terminal (l 26)
Connects the supplied AC adaptor and supplies an external power.
51 (For the )
<SDI OUT> terminal (l 166)
A terminal to output SDI signal by connecting a monitor, etc.
52 LCD monitor (l 50)
53 Built-in microphone (l 122)
This is the built-in stereo microphone <L>/<R>.
54 Accessory shoe (on the main unit)
Attach a video light, etc.
55 Zoom lever (on the grip) (l 115, 150)
Adjusts the zoom of an image.
<T>: Zooms in the image.
<W>: Zooms out the image.
≥ Adjust the volume when playing back clips.
56 Handle unit mounting section (l 30)
57 <USER5> button (l 47, 102)
Used as a USER button (USER5).
≥ [REC CHECK] is set at the time of purchase.
Automatically plays back the last approximately 3 seconds of the
previously shot clip.
52
4342 45 46
44
47
48
49
50
51
X2000
X2000
53 54 5655 57