Operating Instructions

Chapter 4 Operation — Basic operation of the menu
- 59 -
Operating the menu
Various settings are possible from the menu.
There are 2 methods of operation: a method to operate with the multidial, or a method to touch the LCD monitor.
When operating with the multidial
Operate the multidial on the main unit by turning it in vertical direction or pushing it.
1 Press the <MENU> button.
The menu is displayed.
2 Select the menu to set.
1) Turn the multidial to move the cursor to the menu to set.
2) Press the multidial.
The lower level menu is displayed.
≥ The confirmation screen is displayed depending on the menu.
≥ Perform the similar operation if there is next level.
≥ In some menus, a screen to set the numeric value is displayed in the camera image screen (Fig. 2).
≥ In some menus, a message is displayed if a menu cannot be executed.
≥ Press the <EXIT> button to return to one level higher.
3 Select the item to set.
1) Turn the multidial to move the cursor to the item to set.
2) Press the multidial.
A check mark is displayed at the left of the set item. (Fig. 1)
≥ Press the <EXIT> button to return to one level higher.
4 Press the <MENU> button to close the menu.
≥ Depending on the operating item, it will automatically return to the previous screen.
@
NOTE
0 In screens for setting numbers (Fig. 2), you can change the numbers rapidly by pressing the multidial down and holding it in the direction you want the
change to be made.
0 It is also possible to select/set operation icons, thumbnail displays, etc.
Fig. 1 Fig. 2
0