Operating Instructions

Chapter 4 Operation — Menu settings

- 62 -

[CAMERA] menu

Sets the basic functions of the camera.

This menu cannot be set when the thumbnail screen is displayed.

[SW MODE]

[ZOOM RING]

Sets the rear ring 1 direction and zoom control when performing zoom operations.

(Factory setting: [DOWN TELE])

[IRIS RING]

Sets the rear ring 1 direction and iris control when adjusting the iris.

(Factory setting: [DOWN OPEN])

[SUPER GAIN]

Sets the super gain to be assigned to the USER button.

When [ALL] is selected, each time you either press the USER button or touch the USER button icon, the selection switches in the order [SUPER GAIN],

[SUPER GAIN+], normal gain.

The items that can be set are as follows.

≥ [SUPER GAIN], [SUPER GAIN+], [ALL]

(Factory setting: [SUPER GAIN])

[AGC LIMIT]

Sets the maximum gain value during [AGC] operation.

The items that can be set are as follows.

≥ [3dB], [6dB], [12dB], [18dB], [24dB], [30dB]

(Factory setting: [30dB])

[O.I.S.]

Switches enable/disable of the optical image stabilizer function.

If [O.I.S.] is assigned to the USER button, pressing the USER button switches [ON]/[OFF].

For details about optical image stabilizer, refer to “Optical image stabilizer function”. (l 135)

(Factory setting: [ON])

[HYBRID O.I.S.]

Switches enable/disable of the hybrid optical image stabilizer function.

For details about optical image stabilizer, refer to “Optical image stabilizer function”. (l 135)

(Factory setting: [ON])

[O.I.S. MODE]

Switches the operation mode of the optical image stabilizer function.

(Factory setting: [NORMAL])

[DOWN TELE] Zooms in when turned towards the B side.

[UP TELE] Zooms in when turned towards the A side.

[DOWN OPEN] Iris opens when turned towards the B side.

[UP OPEN] Iris opens when turned towards the A side.

[ON] Enables the optical image stabilizer function.

[OFF] Disables the optical image stabilizer function.

[ON] Enables the hybrid optical image stabilizer function.

[OFF] Disables the hybrid optical image stabilizer function.

[NORMAL] Specifies the standard setting for a good balance of correction for large and small camera shake.

[PAN/TILT] Specifies a setting appropriate for shooting that uses a lot of panning and tilting of the camera.

[STABLE] Specifies a setting appropriate for fixing a composition to shoot a subject.